kakha77777 Posted June 7, 2016 Share Posted June 7, 2016 ეს ვინრარის ვერსიები დაკრეკილია თუ დაუკრეკავი ? Quote Link to comment Share on other sites More sharing options...
George Posted June 8, 2016 Share Posted June 8, 2016 დაუკრეკავი რა თქმა უნდა, კრეკი ცალკე უნდა იპოვო, თუმცა ერთხელ ააქტიურებ და მაგის შემდეგ ანახლებ უკვე, აქტივაცია აღარ გაუქმნდება Quote Link to comment Share on other sites More sharing options...
George Posted July 8, 2016 Share Posted July 8, 2016 WinRAR 5.40 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით: Bugs fixed: a) RAR exited with code 6 (file open error) instead of expected code 10 (no files found) if file name specified for archiving did not exist; b) WinRAR could issue an excessive sound notification in the middle of archiving if sound was enabled in WinRAR settings and "Put each file to separate archive" option turned on; c) WinRAR did not delete a temporary file if ZIP archive modification was aborted, because ZIP archive had the read-only attribute; d) WinRAR crashed if "Print file" command was applied to a file or folder without extension. ესეც გადმოსაწერი ლინკი: http://rarlab.com/ Quote Link to comment Share on other sites More sharing options...
George Posted July 22, 2016 Share Posted July 22, 2016 WinRAR 5.40 beta 4 გამოვიდა შემდეგი ჩეინჯლოგით: 1. Bugs fixed: a) if ZIP archive contained an archive comment shorter than 24 characters, the comment page was not displayed in archive properties in Windows Explorer; 'WinRAR x *.rar' command crashed if complete .part1.rar, .part2.rar, ..., .partN.rar volume set was found when expanding *.rar mask. ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-54b4.exe ლინკზე 64 ბიტიანი ინგლისური ვერსიაა, ბევრი ალბათ მაგას აყენებს ხოლმე მაინც 1 Quote Link to comment Share on other sites More sharing options...
George Posted August 17, 2016 Share Posted August 17, 2016 WinRAR 5.40 ფინალური ვერსია გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.40 1. "Name encoding" submenu in "Options" menu allows to select encoding for archived file names. This selection affects archive browsing and extraction commands. You can use Ctrl+E keyboard shortcut to access this menu quickly. It can be useful when unpacking an archive without Unicode file names. For example, unpacking a zip file with Chinese archived names in Windows with Russian specified as a language for non-Unicode programs. 2. If RAR recovery volumes (.rev files) are present in the same folder as usual RAR volumes, archive test command verifies .rev contents after completing testing .rar files. If you wish to test only .rev files without checking .rar volumes, you can select .rev files in WinRAR file list and apply "Test" only to them or run: rar t arcname.part1.rev in the command line. 3. While NTFS file system permits file names with trailing spaces and dots, a lot of Windows programs fail to process such names correctly. If "Allow potentially incompatible names" option in "Advanced" page of extraction dialog is turned off, WinRAR removes trailing spaces and dots, if any, from file names when extracting. This option is turned off by default. Command line RAR also removes trailing spaces and dots when extracting unless -oni switch is specified. 4. Previously "Synchronize archive contents" update mode (-as command line switch) aborted if some of archiving folders could not be read. Now WinRAR continues performing the operation and preserves archived files matching unreadable folders. 5. WinRAR Shift+Del delete command can be used to delete folders containing non-standard file names with trailing spaces and dots. Usual delete to Recycle Bin also as Shift+Del in previous WinRAR versions cannot delete such folders. Unlike Del command, Shift+Del removes files permanently, they are not moved to Recycle Bin. No additional prompts are issued for files with read-only and system attributes. 6. You can drag folders from folder tree panel and drop them to other programs or Desktop to copy or unpack them. Drag the archive icon in tree panel root to unpack the entire archive. 7. "New folder" button in extraction dialog proposes a new folder name based on archive name instead of generic "New Folder". 8. Command line RAR version information: a) if -iver switch is specified, RAR displays the version number and quits. You can run just "RAR -iver"; "x86" or "x64" is displayed in Windows RAR version information both for -iver and in the copyright title for other commands. 9. If -p switch is used without optional <pwd> parameter, a password can be also set with file redirection or pipe. For example: rar -p myarc.rar myfiles < psw.txt 10. Command line RAR treats 'arcname.partN' as 'arcname.partN.rar' if 'arcname.partN' does not exist and 'arcname.part#.rar' exists. For example, it is allowed to run: RAR x arcname.part01 to start extraction from arcname.part01.rar 11. Improvements in 7z archives support: a) "Solid" status is correctly detected and reported for 7z archives in WinRAR "Info" command; dictionary size is displayed for LZMA and LZMA2 7z archives in WinRAR "Info" command; c) unknown packed size for files inside of 7z solid block is denoted as '?' instead of '0' when browsing the archive contents in WinRAR. 12. Maximum comment length for RAR archives is increased from 64 to 256 KB. Since SFX script commands are stored in archive comment, it allows a longer main and license text in SFX archives. 13. Size of default WinRAR viewer font is scaled up properly in Windows high DPI mode. 14. Switch -scul can be used to process big endian UTF-16 list files as well, provided that they have a correct byte order mark. Previously it allowed only little endian file lists. 15. Minimum supported Windows version is Windows XP SP3 now. WinRAR will not run in Windows XP without service packs. 16. "Settings/File list/Allow all uppercase names" option is removed. This option was intended to simplify transition from MS DOS to Windows and is not needed anymore. 17. Bugs fixed: a) WinRAR 5.31 x64 "Compress and email" command did not work with Microsoft Outlook x64; if WinRAR 5.31 version for one of right to left languages was installed in Windows with English or other not right to left system language, WinRAR could change Windows Explorer layout to right to left; c) if archive was stored in a folder without "Write" permission and if archive contents was extracted with drag and drop to a writable folder, WinRAR issued an unnecessary privileges elevation prompt. ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-540.exe Quote Link to comment Share on other sites More sharing options...
George Posted April 22, 2017 Share Posted April 22, 2017 WinRAR 5.50 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.50 beta 1 1. WinRAR and command line RAR use RAR 5.0 archive format by default. You can change it to RAR 4.x compatible format with "RAR4" option in archiving dialog or -ma4 command line switch. If you prefer RAR 4.x format by default, use "Create default..." button on "Compression" page of WinRAR settings and set "RAR4" in the displayed dialog. This change affects only new clean installs. If you already saved RAR format in the default compression profile in previous versions, WinRAR respects stored settings. 2. Use "Set master password" button in "Organize passwords" dialog to encrypt saved password records and protect them from unauthorized access. If saved passwords are protected with master password, you need to enter the master password and press "OK" in password prompt to access them. If entered password does not match the master password, it is treated as a usual password for archive operations. Once entered, the master password is valid until WinRAR is closed. Close WinRAR and open it again after specifying the master password if you wish to see how protection works. Enter a valid and then empty master password to remove encryption from previously protected password records. This WinRAR version uses a new data format for password organizer, so passwords stored in "Organize passwords" dialog are not readable by older versions. It does not affect archive encryption formats and encrypted archives are compatible with previous WinRAR version. Organizer data is converted to a new format only when you save it and not immediately after installing WinRAR. 3. Prompt proposing to set the master password is displayed when storing a password in compression profile. You can enter the master password to encrypt password data stored in Registry and protect it from unauthorized access. You will need to enter the master password in password prompt dialog to access such compression profile after that. Once entered, the master password is valid until WinRAR is closed. Close WinRAR and open it again after specifying the master password if you wish to see how protection works. 4. By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives. While AES-256 is significantly more secure than ZIP 2.0 legacy encryption algorithm, it can be incompatible with some older unzip software. If compatibility with such tools is required, you can enable "ZIP legacy encryption" option in the password dialog or use -mezl switch in the command line mode. 5. Added extraction support for .LZ archives created by Lzip compressor. 6. Modern TAR tools can store high precision file times, lengthy file names and large file sizes in special PAX extended headers inside of TAR archive. Now WinRAR supports such PAX headers and uses them when extracting TAR archives. 7. New "Store modification time" option on "Time" page of archiving dialog can be used to prohibit storing the file modification time in RAR 5.x archives. Former "High precision modification time" option is replaced by "High precision time format". 8. New "Full paths in title bar" option in "Settings/General" dialog. If enabled, the full path of currently opened folder or archive is displayed in WinRAR title bar. 9. New "Settings/Archives" page provides "File types to open as archives first" group of options. Here you can define how Enter or double click on a file with non-archive extension and archive contents should be processed in WinRAR file list. Examples of such files are .docx or self-extracting .exe archives. You can instruct WinRAR to open such files as archives, to run them, to handle them similarly or differently inside and outside of archives, to never run specified file types even if they do not include any archived contents. Default settings are to open self-extracting exe and to run other types of archives with non-archive extension. Regardless of these options, you can always open any such archive file by pressing Ctrl+PgDn on its name in WinRAR file list. 10. New "Copy full names to clipboard" command in "File" menu places full names of selected files to clipboard. This command is also added to context menu displayed when right clicking the file list in WinRAR. Several other commands, which are also present on the toolbar or in main menu, such as "View" and "Repair", are removed from this context menu. 11. LZ and ZIPX are added to list of associations in Settings/Integration dialog. 12. LZ and ZIPX extensions are added to default list of formats for -ms switch ("Specify file types to store") invoked without parameters. 13. You can specify 'f' charset value in -sc switch to use UTF-8 encoding. For example: rar a -scfl arcname @filelist.txt to read contents of filelist.txt as UTF-8 text. 14. RAR "lt" and "vt" commands display file times with nanosecond precision. Such precision is used in RAR5 archives created by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns file time precision. 15. Only '+', '-' and '1' precision modifiers are supported in -ts switch now. Use '+' to store the file time with maximum precision, '-' to omit the file time and '1' to store it with 1 second precision. Intermediate precision modes previously defined with '2' and '3' modifiers are not available in RAR 5.0 archive format and ignored by -ts switch. 16. If a wrong password is entered when unpacking an encrypted file in RAR5 archive, WinRAR proposes to enter a valid password for same file again instead of aborting extraction. 17. File path information is displayed if mouse pointer is placed over a name of archiving file in the operation progress window. 18. Name of currently active compression profile is displayed in the archiving dialog above "Profiles..." button. 19. If "Find" command is invoked from inside of archive subfolder, "File names to find" will include the path to this subfolder. So "Find" will search only starting from this subfolder. 20. Bugs fixed: a) WinRAR failed to unpack files in ZIP archives compressed with XZ algorithm and encrypted with AES; if "Windows progress bars" option in WinRAR settings was turned off and "Put each file to separate archive" archiving mode was used, "gold" part of total progress bar did not display the compressed data ratio correctly; c) SFX archive extraction progress was incorrect in case of multivolume SFX archive with total volume size exceeding 4 GB; d) if archived folder name included trailing spaces, if user selected and extracted some folders in non-root archive folder and if "Allow potentially incompatible names" extraction option was turned off, WinRAR could lose one or more leading characters in extracted folder name; e) if only creation or only last access file time was stored in RAR5 archive with 1 second precision, such as with -ma5 -tsm- -tsa1 switches, this stored time was ignored when extracting. ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted May 6, 2017 Share Posted May 6, 2017 WinRAR 5.50 beta 2 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.50 beta 2 1. Previous versions ignored files with invalid UTF-8 names inside of ZIP archives. Now WinRAR extracts such files, even though their names may include arbitrary text after unpacking. 2. Bugs fixed: a) 5.50 beta 1 could crash when extracting some of broken RAR4 archives; "Settings/Viewer/Unpack everything for" was ignored for files matching "Settings/Archives/File types to open as archives first" masks. Now it is changed, so "Unpack everything for" has a higher precedence for archived files. Files inside of archive matching "Unpack everything for" masks are processed according to that option even if they are also matched by "File types to open as archives first" masks. ესეც გადმოსაწერი ლინკი ინლგისური 64 ბიტინი ვერსიის: http://rarlab.com/rar/winrar-x64-55b2.exe Quote Link to comment Share on other sites More sharing options...
George Posted May 26, 2017 Share Posted May 26, 2017 WinRAR 5.50 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.50 beta 3 1. Added support for Unix extended timestamp extra field (0x5455 extra field tag) in ZIP archives. Such timestamps are used by InfoZip to store UTC file time additionally to standard ZIP local time. Now WinRAR reads and sets such timestamps when extracting. 2. "Run", "Open in associated application", "Show archive contents" items are added to right click menu in WinRAR file list. So you can right click SFX archive or archive file with non-archive extension like .docx and choose if you wish to browse its contents, to run or open it. These items are present only in the file management mode and are not available inside of archives. 3. "File types to open as archives first" option is moved from "Settings/Archives" to "Settings/Compression". Now it works only outside of archives to avoid conflicts with "Settings/Viewer/ Unpack everything for" option. Default folders for archives and extracted files are moved from "Settings/Compression" to "Settings/Paths" dialog page. 4. Bugs fixed: a) some files in TAR archives could be unpacked with full paths even if "Extract relative paths" option was enabled. ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b3.exe Quote Link to comment Share on other sites More sharing options...
George Posted June 16, 2017 Share Posted June 16, 2017 WinRAR 5.50 beta 4 გამოვიდა შემდეგი ჩეინჯლოგით: 1. Bugs fixed: a) fixed a crash and security vulnerability when unpacking corrupt RAR4 archives; "Extract to a specified folder" command was missing in context menu in WinRAR file list when right clicking an archive. ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b4.exe Quote Link to comment Share on other sites More sharing options...
George Posted July 7, 2017 Share Posted July 7, 2017 WinRAR 5.50 beta 5 გამოვიდა შემდეგი ჩეინჯლოგით: 1. If it takes too much time to locate a destination path in extraction dialog folder tree, automatic search performed as user enters the path is cancelled. Lengthy search in large folders could interfere with user input in this dialog. You can still force WinRAR to select the entered destination path in extraction dialog with "Display" button. 2. Bugs fixed: a) the keyboard focus was not returned to "Settings/File list" dialog page after selecting the file list font. ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b5.exe Quote Link to comment Share on other sites More sharing options...
George Posted July 28, 2017 Share Posted July 28, 2017 WinRAR 5.50 beta 6 გამოვიდა შემდეგი ჩეინჯლოგით: 1. File association option for JAR files is off by default in WinRAR installer unless you enabled it earlier in previous WinRAR versions. You need to enable this option manually if you wish to associate WinRAR with *.jar. 2. Unless "Allow absolute paths in symbolic links" extraction dialog option or -ola command line switch are specified, WinRAR does not allow to extract symbolic links with ".." in target if any of link path components is an existing symbolic link itself. It is done to prevent bypassing WinRAR security checks with chains from several symbolic links. 3. Bugs fixed: a) if "Add" command was used from inside of archive opened in WinRAR interface, "file not found" error could be issued for files which pathnames included spaces; fixed crashes when unpacking corrupt RAR archives; c) "rar a arc. filename" command created "arc." archive with trailing dot instead of expected "arc" without any extension; d) "New folder" button in extraction dialog selected a parent of newly created folder instead of such folder itself; e) "Checksum error" could be mistakenly reported for some valid GZIP archives. ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b6.exe Quote Link to comment Share on other sites More sharing options...
George Posted August 15, 2017 Share Posted August 15, 2017 WinRAR 5.50 ფინალური ვერსია გამოვიდა შემდეგი ჩეინჯლოგით: 1. WinRAR and command line RAR use RAR 5.0 archive format by default. You can change it to RAR 4.x compatible format with "RAR4" option in archiving dialog or -ma4 command line switch. If you prefer RAR 4.x format by default, use "Create default..." button on "Compression" page of WinRAR settings and set "RAR4" in the displayed dialog. This change affects only new clean installs. If you already saved RAR format in the default compression profile in previous versions, WinRAR respects stored settings. 2. Use "Set master password" button in "Organize passwords" dialog to encrypt saved password records and protect them from unauthorized access. If saved passwords are protected with master password, you need to enter the master password and press "OK" in password prompt to access them. If entered password does not match the master password, it is treated as a usual password for archive operations. Once entered, the master password is valid until WinRAR is closed. Close WinRAR and open it again after specifying the master password if you wish to see how protection works. Enter a valid and then empty master password to remove encryption from previously protected password records. This WinRAR version uses a new data format for password organizer, so passwords stored in "Organize passwords" dialog are not readable by older versions. It does not affect archive encryption formats and encrypted archives are compatible with previous WinRAR version. Organizer data is converted to a new format only when you save it and not immediately after installing WinRAR. 3. Prompt proposing to set the master password is displayed when storing a password in compression profile. You can enter the master password to encrypt password data stored in Registry and protect it from unauthorized access. You will need to enter the master password in password prompt dialog to access such compression profile after that. Once entered, the master password is valid until WinRAR is closed. Close WinRAR and open it again after specifying the master password if you wish to see how protection works. 4. By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives. While AES-256 is significantly more secure than ZIP 2.0 legacy encryption algorithm, it can be incompatible with some older unzip software. If compatibility with such tools is required, you can enable "ZIP legacy encryption" option in the password dialog or use -mezl switch in the command line mode. 5. Added extraction support for .LZ archives created by Lzip compressor. 6. Modern TAR tools can store high precision file times, lengthy file names and large file sizes in special PAX extended headers inside of TAR archive. Now WinRAR supports such PAX headers and uses them when extracting TAR archives. 7. New "Store modification time" option on "Time" page of archiving dialog can be used to prohibit storing the file modification time in RAR 5.x archives. Former "High precision modification time" option is replaced by "High precision time format". 8. New "Full paths in title bar" option in "Settings/General" dialog. If enabled, the full path of currently opened folder or archive is displayed in WinRAR title bar. 9. New "File types to open as archives first" option in "Settings/Compression". Here you can define how Enter or double click on a file with non-archive extension and archive contents should be processed in WinRAR file list in file management mode. Examples of such files are .docx or self-extracting .exe archives. You can instruct WinRAR either to open such files as archives first or to execute or open them in associated programs. Default settings are to open self-extracting exe and to run other types of archives with non-archive extension. Regardless of these options, you can always open any such archive file by pressing Ctrl+PgDn on its name in WinRAR file list. Default folders for archives and extracted files are moved from "Settings/Compression" to "Settings/Paths". 10. New "Copy full names to clipboard" command in "File" menu places full names of selected files to clipboard. 11. Changes in the context menu displayed when right clicking the file list in WinRAR: a) several commands, which are also present on the toolbar or in main menu, such as "View" and "Repair", are removed from this context menu; "Copy full names to clipboard" command is added; c) "Run" for executables, "Open in associated application" for associated files and "Show archive contents" for archives are added. They allow to choose a way to process SFX archives and archive files with non-archive extensions. These items are present only in the file management mode and are not available inside of archives. 12. LZ and ZIPX are added to list of associations in Settings/Integration dialog. 13. LZ and ZIPX extensions are added to default list of formats for -ms switch ("Specify file types to store") invoked without parameters. 14. You can specify 'f' charset value in -sc switch to use UTF-8 encoding. For example: rar a -scfl arcname @filelist.txt to read contents of filelist.txt as UTF-8 text. 15. RAR "lt" and "vt" commands display file times with nanosecond precision. Such precision is used in RAR5 archives created by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns file time precision. 16. Only '+', '-' and '1' precision modifiers are supported in -ts switch now. Use '+' to store the file time with maximum precision, '-' to omit the file time and '1' to store it with 1 second precision. Intermediate precision modes previously defined with '2' and '3' modifiers are not available in RAR 5.0 archive format and ignored by -ts switch. 17. If a wrong password is entered when unpacking an encrypted file in RAR5 archive, WinRAR proposes to enter a valid password for same file again instead of aborting extraction. 18. File path information is displayed if mouse pointer is placed over a name of archiving file in the operation progress window. 19. Name of currently active compression profile is displayed in the archiving dialog above "Profiles..." button. 20. If "Find" command is invoked from inside of archive subfolder, "File names to find" will include the path to this subfolder. So "Find" will search only starting from this subfolder. 21. Bugs fixed: a) fixed crashes and security vulnerability when unpacking corrupt RAR archives; WinRAR failed to unpack files in ZIP archives compressed with XZ algorithm and encrypted with AES; c) if "Windows progress bars" option in WinRAR settings was turned off and "Put each file to separate archive" archiving mode was used, "gold" part of total progress bar did not display the compressed data ratio correctly; d) SFX archive extraction progress was incorrect in case of multivolume SFX archive with total volume size exceeding 4 GB; e) if archived folder name included trailing spaces, if user selected and extracted some folders in non-root archive folder and if "Allow potentially incompatible names" extraction option was turned off, WinRAR could lose one or more leading characters in extracted folder name; f) if only creation or only last access file time was stored in RAR5 archive with 1 second precision, such as with -ma5 -tsm- -tsa1 switches, this stored time was ignored when extracting. ესეც გადმოსაწერი ლინკი: http://www.rarlab.com/rar/winrar-x64-550.exe 64 ბიტიანი ინგლისური ვერსიაა Quote Link to comment Share on other sites More sharing options...
George Posted March 16, 2018 Share Posted March 16, 2018 WinRAR 5.60 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.60 beta 1 1. We updated WinRAR graphics. We are grateful to http://weirdsgn.com and http://icondesignlab.com designers participated in this endeavor and proud to announce that WinRAR uses the new icon set prepared by Aditya Nugraha Putra from http://weirdsgn.com. Previous WinRAR icons are available as interface theme here: https://rarlab.com/themes/WinRAR_Classic_48x36.theme.rar 2. "Repair" command efficiency is improved for recovery record protected RAR5 archives. Now it can detect deletions and insertions of unlimited size also as shuffled data including data taken from several recovery record protected archives and merged into a single file in arbitrary order. 3. "Turn PC off when done" archiving option is changed to "When done" drop down list, so you can turn off, hibernate or sleep your PC after completing archiving. 4. Use -ioff or -ioff1 command line switch to turn PC off, -ioff2 to hibernate and -ioff3 to sleep your PC after completing an operation. 5. If encoding of comment file specified in -z<file> switch is not defined with -sc switch, RAR attempts to detect UTF-8, UTF-16LE and UTF-16BE encodings based on the byte order mask and data validity tests. 6. WinRAR attempts to detect ANSI, OEM and UTF-8 encodings of ZIP archive comments automatically. 7. "Internal viewer/Use DOS encoding" option in "Settings/Viewer" is replaced with "Internal viewer/Autodetect encoding". If "Autodetect encoding" is enabled, the internal viewer attempts to detect ANSI (Windows), OEM (DOS), UTF-8 and UTF-16 encodings. 8. Normally Windows Explorer context menu contains only extraction commands if single archive has been right clicked. You can override this by specifying one or more space separated masks in "Always display archiving items for" option in Settings/Integration/Context menu items", so archiving commands are always displayed for these file types even if file was recognized as archive. If you wish both archiving and extraction commands present for all archives, place "*" here. 9. SFX module "SetupCode" command accepts an optional integer parameter allowing to control mapping of setup program and SFX own error codes. It is also accessible as "Exit code adjustment" option in "Advanced SFX options/Setup" dialog. 10. New "Show more information" WinRAR command line -im switch. It can be used with "t" command to issue a message also in case of successful archive test result. Without this switch "t" command completes silently if no errors are found. This switch is applicable only to WinRAR.exe and ignored by console RAR.exe. 11. If a wrong password is entered when unpacking an encrypted file in ZIP archive, WinRAR proposes to enter a valid password for same file again instead of aborting extraction. 12. If a wrong password is entered when opening or unpacking RAR archive with encrypted file names, WinRAR proposes to enter a valid password again instead of aborting the operation. Previous versions already did so for RAR archives with encrypted file data, but aborted for archives with file name encryption. 13. WinRAR recognizes GZIP files with arbitrary data preceding an actual GZIP archive, such as .scexe firmware files. 14. @filelist parameter can be specified in "Files to add" field of archiving dialog. In this case WinRAR will attempt the list of archiving files from 'filelist' file, which should be the plain text, one file name per line. 15. Info dialog: a) compression ratio graph is updated; "Names and data" is displayed in "Encryption" field for archives with encrypted file names. 16. Full archive name is displayed if mouse pointer is placed over an archive name in the operation progress window. It can be useful if archive name is lengthy and does not fit to available window space. 17. If -ts1 switch is used with -u or -f, file time comparison is performed with 1 second precision. Previosuly in such case we could wrongly treat an adding file as newer than archived just because we compared the high precision adding file time against the low precision archived file time. 18. "Update" and "Fresh" commands ('u' and 'f' in the command line mode) quit immediately if no files are to be updated. Previously they created a temporary archive before quitting when updating archives with recovery record or quick open information. 19. Prompt is issued after creating 500 volumes from WinRAR GUI shell, so user can continue or quit further archiving. It is done to prevent creating many thousands of volumes in case of wrongly entered volume size. 20. WinRAR uses megabytes instead of bytes as default units for volume size field in the archiving dialog. 21. "Repair" command issues "Recovery record is corrupt" message after repairing RAR5 archive containing a broken recovery record. Previously such message was issued only by "Test" command and "Repair" handled most of recovery record damages silently. 22. Bugs fixed: a) fixed potential security issues when processing corrupt RAR archives; non-English characters in TAR files with PAX extended headers were not displayed correctly; c) "rar x arcname.rar .." command unpacked files to current folder instead of its parent; d) pasting files from Windows Explorer to archive opened in WinRAR blocked further copy and paste operations in Explorer until archiving was finished; e) SFX module issued "The specified password is incorrect" message infinitely not prompting for correct password once a wrong password was entered; f) folders time was always set when extracting ZIP archives even if "File time" options in the extraction dialog were turned off; g) if "Delete archive: Always" was selected when extracting and user pressed "Cancel" in the file overwrite or password prompt, an archive could be deleted even after cancelling extraction for .zip and .7z formats. ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-550.exe მოკლეთ ვიდი შეუცვლიათ მაგ ახალში Quote Link to comment Share on other sites More sharing options...
George Posted April 8, 2018 Share Posted April 8, 2018 WinRAR 5.60 beta 2 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.60 beta 2 1. "Extra large buttons" option in "Settings/General" selects 64x48 toolbar buttons. 2. "Restart" option is added to "Advanced/When done" list in archiving dialog. 3. -ioff4 switch can be used to restart PC after completing archiving or extraction. 4. Since it may take a lot of time to display contents of large tar.bz2 and tar.gz files, WinRAR displays the percent complete in the status bar while opening such archives. 5. Bugs fixed: a) previous beta did not restore the toolbar layout changed by user. ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-56b2.exe Quote Link to comment Share on other sites More sharing options...
George Posted April 28, 2018 Share Posted April 28, 2018 WinRAR 5.60 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.60 beta 3 1. "Put each file to separate archive" option always appends the archive format extension to archiving file extension. So filename.ext is archived to filename.ext.rar instead of filename.rar. 2. Thicker borders of tree panel and comment window to make their resizing easier. ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-56b3.exe Quote Link to comment Share on other sites More sharing options...
George Posted May 21, 2018 Share Posted May 21, 2018 WinRAR 5.60 beta 4 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.60 beta 4 1. WinRAR failed to unpack some ZIP archives compressed with PPMd algorithm. 2. WinRAR entry in Windows Start menu uses Desktop as a start folder, so Desktop contents is shown after opening WinRAR. Previously it had the start folder blank, which resulted in displaying Windows system files on start. 3. If wrong password was specified for ZIP archive, the previous beta issued an error message with "OK" button for every encrypted file even if password was specified with "Set default password" command or -p<pwd> switch. Now users do not need to press "OK" repeatedly for globally set wrong ZIP passwords. ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-56b4.exe Quote Link to comment Share on other sites More sharing options...
George Posted June 8, 2018 Share Posted June 8, 2018 WinRAR 5.60 beta 5 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.60 beta 5 1. WinRAR failed to unpack ZIP archives created by RAR for Android and encrypted with non-English passwords. Fixed now. This fix should also work for archives created by other ZIP tools and utilizing UTF-8 for internal password encoding. 2. Tree panel height was not adjusted after changing the toolbar button size until restarting WinRAR. 3. If hard link is extracted without extracting the link target, WinRAR issues a warning and sets the error code after skipping the link extraction. Previously it was skipped silently. ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-550.exe Quote Link to comment Share on other sites More sharing options...
Gogla1990 Posted June 8, 2018 Share Posted June 8, 2018 5.50 ვერსიასთან შედარებით ცოტა ნელია, მაგრამ სტაბილური დატვირთვით მუშაობს დიდ ფაილებთან კაკრაზ გუშინ მქონდა რამოდენიმე GB დასაარქივებელი და თავი არ შეურცხვენია Quote Link to comment Share on other sites More sharing options...
George Posted June 28, 2018 Share Posted June 28, 2018 WinRAR 5.60 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.60 1. We updated WinRAR graphics. We are grateful to http://weirdsgn.com and http://icondesignlab.com designers participated in this endeavor and proud to announce that WinRAR uses the new icon set prepared by Aditya Nugraha Putra from http://weirdsgn.com. Previous WinRAR icons are available as interface theme here: https://rarlab.com/themes/WinRAR_Classic_48x36.theme.rar 2. "Repair" command efficiency is improved for recovery record protected RAR5 archives. Now it can detect deletions and insertions of unlimited size also as shuffled data including data taken from several recovery record protected archives and merged into a single file in arbitrary order. 3. "Turn PC off when done" archiving option is changed to "When done" drop down list, so you can turn off, hibernate or sleep your PC after completing archiving. 4. Use -ioff or -ioff1 command line switch to turn PC off, -ioff2 to hibernate and -ioff3 to sleep your PC after completing an operation. 5. If encoding of comment file specified in -z<file> switch is not defined with -sc switch, RAR attempts to detect UTF-8, UTF-16LE and UTF-16BE encodings based on the byte order mask and data validity tests. 6. WinRAR attempts to detect ANSI, OEM and UTF-8 encodings of ZIP archive comments automatically. 7. "Internal viewer/Use DOS encoding" option in "Settings/Viewer" is replaced with "Internal viewer/Autodetect encoding". If "Autodetect encoding" is enabled, the internal viewer attempts to detect ANSI (Windows), OEM (DOS), UTF-8 and UTF-16 encodings. 8. Normally Windows Explorer context menu contains only extraction commands if single archive has been right clicked. You can override this by specifying one or more space separated masks in "Always display archiving items for" option in Settings/Integration/Context menu items", so archiving commands are always displayed for these file types even if file was recognized as archive. If you wish both archiving and extraction commands present for all archives, place "*" here. 9. SFX module "SetupCode" command accepts an optional integer parameter allowing to control mapping of setup program and SFX own error codes. It is also accessible as "Exit code adjustment" option in "Advanced SFX options/Setup" dialog. 10. New "Show more information" WinRAR command line -im switch. It can be used with "t" command to issue a message also in case of successful archive test result. Without this switch "t" command completes silently if no errors are found. This switch is applicable only to WinRAR.exe and ignored by console RAR.exe. 11. If a wrong password is entered when unpacking an encrypted file in ZIP archive, WinRAR proposes to enter a valid password for same file again instead of aborting extraction. 12. If a wrong password is entered when opening or unpacking RAR archive with encrypted file names, WinRAR proposes to enter a valid password again instead of aborting the operation. Previous versions already did so for RAR archives with encrypted file data, but aborted for archives with file name encryption. 13. WinRAR recognizes GZIP files with arbitrary data preceding an actual GZIP archive, such as .scexe firmware files. 14. @filelist parameter can be specified in "Files to add" field of archiving dialog. In this case WinRAR will attempt the list of archiving files from 'filelist' file, which should be the plain text, one file name per line. 15. Info dialog: a) compression ratio graph is updated; b) "Names and data" is displayed in "Encryption" field for archives with encrypted file names. 16. Full archive name is displayed if mouse pointer is placed over an archive name in the operation progress window. It can be useful if archive name is lengthy and does not fit to available window space. 17. If -ts1 switch is used with -u or -f, file time comparison is performed with 1 second precision. Previosuly in such case we could wrongly treat an adding file as newer than archived just because we compared the high precision adding file time against the low precision archived file time. 18. "Update" and "Fresh" commands ('u' and 'f' in the command line mode) quit immediately if no files are to be updated. Previously they created a temporary archive before quitting when updating archives with recovery record or quick open information. 19. Prompt is issued after creating 500 volumes from WinRAR GUI shell, so user can continue or quit further archiving. It is done to prevent creating many thousands of volumes in case of wrongly entered volume size. 20. WinRAR uses megabytes instead of bytes as default units for volume size field in the archiving dialog. 21. "Repair" command issues "Recovery record is corrupt" message after repairing RAR5 archive containing a broken recovery record. Previously such message was issued only by "Test" command and "Repair" handled most of recovery record damages silently. 22. Bugs fixed: a) fixed potential security issues when processing corrupt RAR archives; b) non-English characters in TAR files with PAX extended headers were not displayed correctly; c) "rar x arcname.rar .." command unpacked files to current folder instead of its parent; d) pasting files from Windows Explorer to archive opened in WinRAR blocked further copy and paste operations in Explorer until archiving was finished; e) SFX module issued "The specified password is incorrect" message infinitely not prompting for correct password once a wrong password was entered; f) folders time was always set when extracting ZIP archives even if "File time" options in the extraction dialog were turned off; g) if "Delete archive: Always" was selected when extracting and user pressed "Cancel" in the file overwrite or password prompt, an archive could be deleted even after cancelling extraction for .zip and .7z formats. ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-560.exe Quote Link to comment Share on other sites More sharing options...
George Posted September 7, 2018 Share Posted September 7, 2018 WinRAR 5.61 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.61 beta 1 1. "Delete archive" extraction option deletes all volumes even if user started extraction from non-first RAR volume, but first volume is present and all files are unpacked successfully. In such case previous versions ignored "Delete archive" even if WinRAR was able to locate the first volume and process the volume set from beginning. 2. Compression ratio bar is not displayed on "Archive" page of Explorer file properties for archives with encrypted file names. WinRAR cannot reliably calculate it for such archives without a password and previously it just displayed 0% here. 3. Bugs fixed: a) WinRAR displayed "The specified password is incorrect" message infinitely when attempting to open RAR5 archive with encrypted file names if wrong global password was set with Ctrl+P; b) memory management bug in the password dialog could lead to access to already freed memory followed by crash. This issue may be also associated with security risks; c) fixed a crash when processing corrupt RAR archives. This issue may be also associated with security risks; d) while starting, WinRAR could cause a brief flickering in menu bars of few other applications; e) WinRAR "Find" command matched "String to find" against all archived files ignoring "File names to find" mask when searching in CAB archives; f) SFX module "License" command did not set a title of license window; g) if "Start-up folder" in WinRAR settings included the trailing backslash, WinRAR ignored first "Up one level" command. ესეც გადმოსაწერი ლინკი ინგლისური 64 ბიტიანი ვერსიის: https://rarlab.com/rar/winrar-x64-560.exe Quote Link to comment Share on other sites More sharing options...
George Posted October 3, 2018 Share Posted October 3, 2018 WinRAR 5.61 ფინალური ვერსია გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.61 1. "Delete archive" extraction option deletes all volumes even if user started extraction from non-first RAR volume, but first volume is present and all files are unpacked successfully. In such case previous versions ignored "Delete archive" even if WinRAR was able to locate the first volume and process the volume set from beginning. 2. Compression ratio bar is not displayed on "Archive" page of Explorer file properties for archives with encrypted file names. WinRAR cannot reliably calculate it for such archives without a password and previously it just displayed 0% here. 3. Bugs fixed: a) WinRAR displayed "The specified password is incorrect" message infinitely when attempting to open RAR5 archive with encrypted file names if wrong global password was set with Ctrl+P; b) memory management bug in the password dialog could lead to access to already freed memory followed by crash. This issue may be also associated with security risks; c) fixed crashes in corrupt RAR, ACE and LZH archives. This issue may be also associated with security risks; d) while starting, WinRAR could cause a brief flickering in menu bars of few other applications; e) WinRAR "Find" command matched "String to find" against all archived files ignoring "File names to find" mask when searching in CAB archives; f) SFX module "License" command did not set a title of license window; g) if "Start-up folder" in WinRAR settings included the trailing backslash, WinRAR ignored first "Up one level" command. ესეც გადმოსაწერი ლინკი ინგლისური 64 ბიტიანი ვერსიის: https://rarlab.com/rar/winrar-x64-561.exe Quote Link to comment Share on other sites More sharing options...
George Posted February 1, 2019 Share Posted February 1, 2019 Version 5.70 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: 1. "Files to process" option on "Time" page of archiving dialog allows to choose files based on modification, creation or last access file time. Previously it was possible for modification time only. 2. Command line -ta, -tb, -tn, -to switches accept 'm', 'c' and 'a' modifiers after the switch name. So file time conditions can include not only the file modification time as in previous versions, but also creation and last access time. 3. WinRAR file list can display creation and last access file times if they are available. Creation and last access columns are disabled by default and can be enabled in "Select file list columns" dialog. This dialog is opened after right clicking on file list column headers or after pressing "File list/Files/Columns..." button in WinRAR settings. 4. "Double extensions for archives" and "Archives in subfolders" options on "Files" page of archiving dialog modify behavior of "Put each file to separate archive" option. You can switch between archive names in filename.ext.rar and filename.rar style with "Double extensions for archives". You can create a separate archive for every file in selected subfolders or store the entire contents of every selected folder in separate archive depending on the state of "Archives in subfolders" option. 5. New -ad1 switch can be used when unpacking multiple archives recursively, such as 'rar x -r -ad1 arc\*.rar'. It creates a separate folder for files unpacked from each archive, but unlike already existing -ad switch, it creates such folders in each archive folder. 6. If context menu "Extract each archive to separate folder" is applied to archives from different folders in Windows Explorer "Search results", subfolders with unpacked files are created in each archive folder. Previous versions created them all in a folder of right clicked archive. 7. New "File list/List style/Checkboxes" option in WinRAR settings allows to use checkboxes to select file list items. 8. New "File list/Files/Exact sizes" option in WinRAR settings. If this option is on, file sizes are always displayed in bytes. If it is off, sizes are rounded up and use units such as KB or MB. Smaller files can be still displayed in bytes. 9. If several console RAR are started with -ioff switch, PC is turned off by RAR copy finished last. Previously this switch was processed by first finished copy. 10. Read and write buffer size is increased for .iso files. It can help to improve .iso extraction performance in some cases, such as for network drives. 11. If "Delete archive" option in extraction dialog is applied to a set of RAR and REV volumes in volname.part# format, WinRAR will delete REV volumes as well. Previously only RAR volumes were deleted keeping REV files intact. 12. If "Delete archive" option in extraction dialog is applied to set of ZIP volumes with .zip.001, .zip.002, .zip.003 extensions, WinRAR will delete all ZIP volumes. Previously only .zip.001 volume was deleted for such volume naming scheme. 13. If we unpack arcname.rar using "Extract to arcname\" Explorer context menu command and "arcname" file already exists, WinRAR shell extension will propose "Extract to arcname~1\" instead. Previously this context menu command attempted to create a folder with same name as already existing file and failed. 14. If we pack a shortcut file with .lnk extension from Explorer context menu, .lnk file itself is added to archive. Previous versions added .lnk file target instead of .lnk file. 15. Windows does not allow executables exceeding 4 GB, so WinRAR issues an error immediately when attempting to create 4 GB or larger RAR SFX volumes. Previously WinRAR issued such error only after creating the first RAR volume. 16. Total extraction progress is displayed for 7z multivolume archives. Accuracy of 7z total extraction progress is improved. 17. Nadav Grossman from Check Point Software Technologies informed us about a security vulnerability in UNACEV2.DLL library. Aforementioned vulnerability makes possible to create files in arbitrary folders inside or outside of destination folder when unpacking ACE archives. WinRAR used this third party library to unpack ACE archives. UNACEV2.DLL had not been updated since 2005 and we do not have access to its source code. So we decided to drop ACE archive format support to protect security of WinRAR users. We are thankful to Check Point Software Technologies for reporting this issue. 18. Bugs fixed: a) console RAR mixed up source and destination file sizes and times in the overwrite prompt when updating a file in RAR archive with -o switch; b) dragging files from 32-bit applications to 64-bit WinRAR window did not work; c) WinRAR Shift+Del command applied to a folder could fail to delete some its subfolders. This command is used to delete files and folders permanently instead of moving them to Recycle Bin; d) folder tree panel could not change folders if archived pathnames started from path separator, such as in archives created by tar tool with --absolute-names option; e) if relative "Path=.\somefolder" was specified in SFX comment and SFX archive needed to elevate privileges when extracting, it created 'somefolder\somefolder' instead of 'somefolder'; f) commands modifying an existing RAR4 volume reset the volume number field to 1. While it did not affect extraction, WinRAR displayed a wrong volume number for such volumes; g) fixed a crash when reading a comment from a corrupt RAR file; h) toolbar in "Find" command "Search results" window was not adjusted to different toolbar icon sizes properly. ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-57b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted February 24, 2019 Share Posted February 24, 2019 WinRAR patches 19 year old security issue https://www.guru3d.com/news-story/winrar-patches-19-year-old-security-issue.html Quote Link to comment Share on other sites More sharing options...
George Posted February 27, 2019 Share Posted February 27, 2019 Version 5.70 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.70 1. "Files to process" option on "Time" page of archiving dialog allows to choose files based on modification, creation or last access file time. Previously it was possible for modification time only. 2. Command line -ta, -tb, -tn, -to switches accept 'm', 'c' and 'a' modifiers after the switch name. So file time conditions can include not only the file modification time as in previous versions, but also creation and last access time. Such switch can include multiple modifiers to set the same date for all specified times. For example, -tamc20190215 will process files modified and created after 2019-02-15. New 'o' modifier permits to switch from AND to OR logic, so -tamco20190215 includes files modified or created after 2019-02-15. It is also allowed to specify several time filtering switches with different dates in the same command line, like: -taco20190201 -tbmo20190210 Switches -ta and -tn also include files matching the specified date exactly. Switches -tb and -to exclude such files. 3. WinRAR file list can display creation and last access file times if they are available. Creation and last access columns are disabled by default and can be enabled in "Select file list columns" dialog. This dialog is opened after right clicking on file list column headers or after pressing "File list/Files/Columns..." button in WinRAR settings. 4. "Double extensions for archives" and "Archives in subfolders" options on "Files" page of archiving dialog modify behavior of "Put each file to separate archive" option. You can switch between archive names in filename.ext.rar and filename.rar style with "Double extensions for archives". You can create a separate archive for every file in selected subfolders or store the entire contents of every selected folder in separate archive depending on the state of "Archives in subfolders" option. 5. New -ad1 switch can be used when unpacking multiple archives recursively, such as 'rar x -r -ad1 arc\*.rar'. It creates a separate folder for files unpacked from each archive, but unlike already existing -ad switch, it creates such folders in each archive folder. 6. If context menu "Extract each archive to separate folder" is applied to archives from different folders in Windows Explorer "Search results", subfolders with unpacked files are created in each archive folder. Previous versions created them all in a folder of right clicked archive. 7. New "File list/List style/Checkboxes" option in WinRAR settings allows to use checkboxes to select file list items. 8. New "File list/Files/Exact sizes" option in WinRAR settings. If this option is on, file sizes are always displayed in bytes. If it is off, sizes are rounded up and use units such as KB or MB. Smaller files can be still displayed in bytes. 9. If several console RAR are started with -ioff switch, PC is turned off by RAR copy finished last. Previously this switch was processed by first finished copy. 10. Read and write buffer size is increased for .iso files. It can help to improve .iso extraction performance in some cases, such as for network drives. 11. If "Delete archive" option in extraction dialog is applied to a set of RAR and REV volumes in volname.part# format, WinRAR will delete REV volumes as well. Previously only RAR volumes were deleted keeping REV files intact. 12. If "Delete archive" option in extraction dialog is applied to set of ZIP volumes with .zip.001, .zip.002, .zip.003 extensions, WinRAR will delete all ZIP volumes. Previously only .zip.001 volume was deleted for such volume naming scheme. 13. If we unpack arcname.rar using "Extract to arcname\" Explorer context menu command and "arcname" file already exists, WinRAR shell extension will propose "Extract to arcname~1\" instead. Previously this context menu command attempted to create a folder with same name as already existing file and failed. 14. If we pack a shortcut file with .lnk extension from Explorer context menu, .lnk file itself is added to archive. Previous versions added .lnk file target instead of .lnk file. 15. Windows does not allow executables exceeding 4 GB, so WinRAR issues an error immediately when attempting to create 4 GB or larger RAR SFX volumes. Previously WinRAR issued such error only after creating the first RAR volume. 16. Total extraction progress is displayed for 7z multivolume archives. Accuracy of 7z total extraction progress is improved. 17. "Find" command "Disks and folders" drop down list has been renamed to "Search area". Additionally to already existing choices, it includes a new "Selected items" option restricting search to files and folders selected in WinRAR file list. 18. "Find" command displays the number of found items in status bar. 19. "Diagnostic messages" window displays archive names in a separate column to provide the better message visibility for lengthy archive names. 20. Switch -isnd[-] in command line WinRAR mode allows to override "Enable sound" option in WinRAR settings. Use -isnd to turn sound notifications on and -isnd- to turn them off. 21. Nadav Grossman from Check Point Software Technologies informed us about a security vulnerability in UNACEV2.DLL library. Aforementioned vulnerability makes possible to create files in arbitrary folders inside or outside of destination folder when unpacking ACE archives. WinRAR used this third party library to unpack ACE archives. UNACEV2.DLL had not been updated since 2005 and we do not have access to its source code. So we decided to drop ACE archive format support to protect security of WinRAR users. We are thankful to Check Point Software Technologies for reporting this issue. 22. Bugs fixed: a) console RAR mixed up source and destination file sizes and times in the overwrite prompt when updating a file in RAR archive with -o switch; b) dragging files from 32-bit applications to 64-bit WinRAR window did not work; c) WinRAR Shift+Del command applied to a folder could fail to delete some its subfolders. This command is used to delete files and folders permanently instead of moving them to Recycle Bin; d) folder tree panel could not change folders if archived pathnames started from path separator, such as in archives created by tar tool with --absolute-names option; e) if relative "Path=.\somefolder" was specified in SFX comment and SFX archive needed to elevate privileges when extracting, it created 'somefolder\somefolder' instead of 'somefolder'; f) commands modifying an existing RAR4 volume reset the volume number field to 1. While it did not affect extraction, WinRAR displayed a wrong volume number for such volumes; g) fixed a crash when reading a comment from a corrupt RAR file; h) toolbar in "Find" command "Search results" window was not adjusted to different toolbar icon sizes properly. ესეც გადმოსაწერი ლინკი 64 ბიტიანი ინგლისური ვერსიის: https://rarlab.com/rar/winrar-x64-570.exe არის სხვა ენებზეც და 32 ბიტიანი ვარიანტიც Quote Link to comment Share on other sites More sharing options...
George Posted April 5, 2019 Share Posted April 5, 2019 WinRAR 5.71 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 5.71 beta 1 1. "Convert archives" command: a) improved performance when processing a lot of small archives in Windows 10; b) fixed memory leaks which could lead to excessive memory use when converting to ZIP format. 2. Corrupt ZIP archive processing: a) "Repair" command replaces packed and unpacked file sizes stored in local file header with sizes from central directory if local header sizes look invalid; b) file extraction is stopped at unpacked size stored in ZIP headers even if available packed data allows further extraction. It is done to prevent unexpected hard drive space usage. 3. Ctrl+C allows to abort RAR "l" command quickly. In previous versions it could take several seconds until list command stopped. 4. Bugs fixed: a) if "Save archive name" and "Add to context menu" options were set in compression profile parameters and profile was invoked from Explorer context menu, WinRAR proposed an automatically generated archive name instead of name saved in profile. b) WinRAR displayed an unneeded pair of round brackets in "Archive" column of "Diagnostic messages" window for system error messages; c) "Extract to folder\" Windows Explorer context menu command could fail to unpack ZIP archives if their names included a numeric part followed by .zip extension, arbitrary data was present before the first file record and "Remove redundant folders from extraction path" WinRAR option was switched on; d) in "RAR x -x<mask> arcname" command, parent folders of files matching the specified mask also were excluded from extracting; e) "Find" command returned the current folder own name additionally to its contents for "Current folder" search area if folder name matched "File names to find" mask; f) if "Find in files" and "Find in archives" are both enabled, "Find" command did not match an archive name itself against "File names to find" mask after searching inside of archive. So it did not display archive names for masks like *.rar and applied this mask only to files inside of archives; g) when running an executable directly from archive, WinRAR 5.70 did not set a temporary folder with unpacked files as current. So executables attempting to access other archived files in current folder could fail to work; h) WinRAR could be inaccessilbe for few seconds after closing an archived file opened in internal viewer in Windows 10; i) dragging a file to subfolder of ZIP archive with "Store full paths" option enabled produced invalid pathnames consisting of repeated subfolder name. Same invalid pathnames were produced if adding files to ZIP archive with -ap<folder> -ep2 switches. ესეც გადმოსაწერი ლინკი ინგლისური 64 ბიტიანი ვერსიის: https://rarlab.com/rar/winrar-x64-571b1.exe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.