George Posted October 29, 2022 Share Posted October 29, 2022 გრძელვადიანი პერერივის შემდეგ ახალი WinRAR 6.20 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.20 beta 1 1. If "Autodetect passwords" option in "Organizer passwords" dialog is enabled and password matching a processing archive is present among saved passwords, it is applied automatically. This option is applicable only for archives in RAR 5.0 and ZIP formats, which allow to verify the password validity quickly. There is a minor chance of incorrect password detection for ZIP archives if stored passwords do not include a proper one. If encrypted ZIP archive extraction fails, you can try to disable this option, repeat extraction and enter a valid password manually. 2. If extraction command involves only a part of files in RAR archive, the additional archive analysis is performed when starting extraction. It helps to properly unpack file references even if reference source is not selected. It works for most of RAR archives except for volumes on multiple removable media and archives containing a very large number of references. Also in some cases such analysis may help to optimize the amount of processing data when extracting individual files from semi-solid archives created with -s<N> and -se switches. 3. "Save original archive name and time" option on "Options" page of archiving dialog allows to save the original archive name and creation time. If archive includes such saved name and time, they are displayed on "Info" page of "Show information" command and can be restored on "Options" page of same command. Restoring involves renaming an archive to original name and setting the saved time as the archive creation and modification time. Switch -ams or just -am together with archive modification commands can be used to save the archive name and time in the command line mode. These saved parameters are displayed in header of "l" and "v" commands output and can be restored with -amr switch combined with "ch" command, such as "rar ch -amr arc.rar". If -amr is specified, "ch" ignores other archive modification switches. 4. Faster RAR5 compression of poorly compressible data on modern CPUs with 8 or more execution threads. This applies to all methods except "Fastest", which performance remains the same. 5. "Repair" command efficiency is improved for shuffled data blocks in recovery record protected RAR5 archives. 6. If file size has grown after archiving when creating non-solid RAR volumes, such file is stored without compression regardless of volume number, provided that file isn't split between volumes. Previously it worked only for files in the first volume. 7. Added decompression of .zipx archives containing file references, provided that both reference source and target are selected and reference source precedes the target inside of archive. Typically, if .zipx archive includes file references, it is necessary to unpack the entire archive to extract references successfully. 8. Added decompression of .zst long range mode archives with dictionary exceeding 128 MB. Previously it was possible to decompress them only if dictionary was 128 MB or less. 9. If "Turn PC off", "Hibernate", "Sleep" or "Restart PC" archiving options are enabled in WinRAR, a prompt to confirm or cancel such power management action is displayed directly before starting it. If no selection was made by user for 30 seconds, the proposed action is confirmed and started automatically. This prompt is also displayed for -ioff switch in WinRAR command line, but not in console RAR command line. 10. Context menu in WinRAR file list provides "Open in internal viewer" command for archive files. It can be helpful if you wish to view the archive raw data in internal viewer. For example, to read an email archive with UUE attachments included. Usual "View" command always displays the archive contents. If file is recognized as UUE archive, "View" would show UUE attachments. 11. Recovery record size is displayed on "Archive" page of file properties invoked from Explorer context menu for archives in RAR5 format. Previously there was only "Present" instead of exact size for RAR5 archives. 12. When archiving from stdin with -si switch, RAR displays the current amount of read bytes as the progress indicator. 13. If wrong password is specified when adding files to encrypted solid RAR5 archive, a password will be requested again. Previous versions cancelled archiving in this case. 14. If both options "Test archived files" and "Clear attribute "Archive" after compressing" or their command line -t -ac equivalents are enabled when archiving, "Archive" attribute will be cleared only if test was completed successfully. Previously it was cleared even when test reported errors. 15. NoDrives value containing the bit mask to hide drives can be now read from "HKEY_CURRENT_USER\Software\WinRAR\Policy" Registry key, which allows to include it to winrar.ini if necessary. Its "Software\Microsoft\Windows\CurrentVersion\Policies" locations in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE are also supported. Previously only "Software\Microsoft\Windows\CurrentVersion\Policies" in HKEY_CURRENT_USER was recognized. 16. Bugs fixed: a) archive modification commands could fail for some ZIP archives with file comments; b) fixed a memory leak when reading contents of .tar.bz2 archives; c) if source and resulting archive format is the same, the archive conversion command didn't set the original archive time to a newly created archive even if "Original archive time" option was selected in archiving parameters; d) if "Merge volumes contents" option in "Settings/File list" was turned on, the folder packed size in WinRAR file list could be less than expected when browsing a multivolume archive contents. It didn't include the packed size of file parts continuing from previous volume into calculation; e) even if "Set file security" extraction option was turned off by default, extraction commands in Explorer context menu still attempted to restore NTFS file security data. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted November 20, 2022 Share Posted November 20, 2022 WinRAR 6.20 beta 2 დაიდო რამდენიმე დღის უკან შემდეგი ჩეინჯლოგით: Version 6.20 beta 2 1. If Zone.Identifier alternate NTFS stream, also known as Mark of the Web, is present both in archived office document file and host archive and if archive security zone is set to "Internet" or "Restricted sites", WinRAR sets the host archive stream to unpacked file and ignores the archived file stream. 2. Bugs fixed: a) updating an existing archive in RAR5 format could result in broken archive data in beta 1 if existing archive included the archive comment, encrypted file names and was created by version older than WinRAR 6.20; b) updating an archive with -ver -ow -s switches failed with checksum error if -ver removed old archived file versions. Without -s, it could produce a larger than necessary archive with redundant NTFS security data records. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620b2.exe Quote Link to comment Share on other sites More sharing options...
Dreamliner Posted November 30, 2022 Share Posted November 30, 2022 portable ვერსია სად შეიძლება ვნახო? Quote Link to comment Share on other sites More sharing options...
George Posted November 30, 2022 Share Posted November 30, 2022 ინგლისური ფინალური ბილდი თუ გინდოდა და არა ეგ ბოლო ბეტა ოფიციალური ლინკი არ უდევთ, მარტო ლევი სბორკების გადმოწერა შეგიძლია ან რეპაკების, აი ერთ-ერთი ეგეთი ესაა: http://portableappz.blogspot.com/2012/06/winrar-420-32-64-bit-multilingual.html სხვა მე ვერ ვნახე რაღაც, თვითონ მაგათ საიტზე არ დევს ეგეთი ვარიანტი 1 Quote Link to comment Share on other sites More sharing options...
Dreamliner Posted December 1, 2022 Share Posted December 1, 2022 არ დავეძებ, მთავარია ფლეშკაზე იმუშაოს. გაიხარე! ეგ საიტი ვეღარ გავიხსენე. Quote Link to comment Share on other sites More sharing options...
George Posted December 16, 2022 Share Posted December 16, 2022 WinRAR 6.20 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.20 beta 3 1. If Zone.Identifier alternate NTFS stream, also known as Mark of the Web, is present both in archived office document file and host archive, WinRAR sets a stream with more restricted security zone to unpacked file. Previous beta always preferred the archive security zone if it was "Internet" or "Restricted sites". We are thankful to Amine Brahmi for bringing our attention to conflicting Zone.Identifier streams in this case. 2. "Archive" page in archive properties in Windows Explorer: a) "Original name" and "Original time" field names are not displayed anymore for non-RAR archives; b) the compression dictionary size is displayed also for non-RAR archives when available. 3. Bugs fixed: a) if "Launch folder windows in a separate process" Windows Explorer option was enabled in Windows 11 22H2, in some cases WinRAR context menu items didn't perform any action on a click; b) WinRAR could read data beyond the end of buffer and crash when unpacking files from specially crafted ZIP archive. We are thankful to Bakker working with Trend Micro Zero Day Initiative for letting us know about this bug. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620b3.exe Quote Link to comment Share on other sites More sharing options...
George Posted January 24 Share Posted January 24 WinRAR 6.20 ფინალური ვერსია გამოვიდა შეიმდეგი ჩეინჯლოგით: Version 6.20 1. If "Autodetect passwords" option in "Organizer passwords" dialog is enabled and password matching a processing archive is present among saved passwords, it is applied automatically. This option is applicable only for archives in RAR 5.0 and ZIP formats, which allow to verify the password validity quickly. There is a minor chance of incorrect password detection for ZIP archives if stored passwords do not include a proper one. If encrypted ZIP archive extraction fails, you can try to disable this option, repeat extraction and enter a valid password manually. 2. If extraction command involves only a part of files in RAR archive, the additional archive analysis is performed when starting extraction. It helps to properly unpack file references even if reference source is not selected. It works for most of RAR archives except for volumes on multiple removable media and archives containing a very large number of references. Also in some cases such analysis may help to optimize the amount of processing data when extracting individual files from semi-solid archives created with -s and -se switches. 3. "Save original archive name and time" option on "Options" page of archiving dialog allows to save the original archive name and creation time. If archive includes such saved name and time, they are displayed on "Info" page of "Show information" command and can be restored on "Options" page of same command. Restoring involves renaming an archive to original name and setting the saved time as the archive creation and modification time. Switch -ams or just -am together with archive modification commands can be used to save the archive name and time in the command line mode. These saved parameters are displayed in header of "l" and "v" commands output and can be restored with -amr switch combined with "ch" command, such as "rar ch -amr arc.rar". If -amr is specified, "ch" ignores other archive modification switches. 4. Faster RAR5 compression of poorly compressible data on modern CPUs with 8 or more execution threads. This applies to all methods except "Fastest", which performance remains the same. 5. "Repair" command efficiency is improved for shuffled data blocks in recovery record protected RAR5 archives. 6. If file size has grown after archiving when creating non-solid RAR volumes, such file is stored without compression regardless of volume number, provided that file isn't split between volumes. Previously it worked only for files in the first volume. 7. Added decompression of .zipx archives containing file references, provided that both reference source and target are selected and reference source precedes the target inside of archive. Typically, if .zipx archive includes file references, it is necessary to unpack the entire archive to extract references successfully. 8. Added decompression of .zst long range mode archives with dictionary exceeding 128 MB. Previously it was possible to decompress them only if dictionary was 128 MB or less. 9. If "Turn PC off", "Hibernate", "Sleep" or "Restart PC" archiving options are enabled in WinRAR, a prompt to confirm or cancel such power management action is displayed directly before starting it. If no selection was made by user for 30 seconds, the proposed action is confirmed and started automatically. This prompt is also displayed for -ioff switch in WinRAR command line, but not in console RAR command line. 10. Context menu in WinRAR file list provides "Open in internal viewer" command for archive files. It can be helpful if you wish to view the archive raw data in internal viewer. For example, to read an email archive with UUE attachments included. Usual "View" command always displays the archive contents. If file is recognized as UUE archive, "View" would show UUE attachments. 11. Recovery record size is displayed on "Archive" page of file properties invoked from Explorer context menu for archives in RAR5 format. Previously there was only "Present" instead of exact size for RAR5 archives. 12. When archiving from stdin with -si switch, RAR displays the current amount of read bytes as the progress indicator. 13. If wrong password is specified when adding files to encrypted solid RAR5 archive, a password will be requested again. Previous versions cancelled archiving in this case. 14. If both options "Test archived files" and "Clear attribute "Archive" after compressing" or their command line -t -ac equivalents are enabled when archiving, "Archive" attribute will be cleared only if test was completed successfully. Previously it was cleared even when test reported errors. 15. NoDrives value containing the bit mask to hide drives can be now read from "HKEY_CURRENT_USER\Software\WinRAR\Policy" Registry key, which allows to include it to winrar.ini if necessary. Its "Software\Microsoft\Windows\CurrentVersion\Policies" locations in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE are also supported. Previously only "Software\Microsoft\Windows\CurrentVersion\Policies" in HKEY_CURRENT_USER was recognized. 16. Bugs fixed: a) archive modification commands could fail for some ZIP archives with file comments; b) fixed a memory leak when reading contents of .tar.bz2 archives; c) if source and resulting archive format is the same, the archive conversion command didn't set the original archive time to a newly created archive even if "Original archive time" option was selected in archiving parameters; d) if "Merge volumes contents" option in "Settings/File list" was turned on, the folder packed size in WinRAR file list could be less than expected when browsing a multivolume archive contents. It didn't include the packed size of file parts continuing from previous volume into calculation; e) even if "Set file security" extraction option was turned off by default, extraction commands in Explorer context menu still attempted to restore NTFS file security data; f) WinRAR could read data beyond the end of buffer and crash when unpacking files from specially crafted ZIP archive. We are thankful to Bakker working with Trend Micro Zero Day Initiative for letting us know about this bug. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620.exe აგრეთვე დაიდო უკვე WinRAR 6.21 beta 1 ბილდიც შემდეგი ჩეინჯლოგით: Version 6.21 beta 1 1. Switches -ed and -e+d are also supported by ZIP archives. Previously they worked only for RAR archives. 2. Bugs fixed: a) if unencrypted file was stored after encrypted in the same RAR archive and both files had been unpacked in the same extraction command, WinRAR 6.20 failed to unpack the unencrypted file; b) in some cases a wrong detailed reason of file open error could be displayed in the second line of open error message. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-621b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted February 14 Share Posted February 14 6.21 beta 1 ატრაკებს ჩემთან, ლოლ ზოგიერთ არქივებს არ მიხსნიდა, ჯერ მეგონა დესკტოპზე აირია რაღაცა, იცის ხოლმე ხანდახან, მერე შევუცვალე ოპერაში გადმოწერის ფოლდერი, მაგრამ ამოარქივების დროს ისევ ვერ იპოვაო ფაილი დამიწერა, მერე ავდექი და 6.2 დავაყენე ვინრარი და ეგრევე გასწორდა, ვისაც რამე მსგავსი ექნება დროებით გადმოვიდეს ფინალურზე, როგორც ჩანს მანდ რაღაცა შეიძლება დაფიქსეს მაგრამ სხვა რაღაცამ გაუბერა, დაჟე პოვერ რანით ვერ ხსნიდა ზოგიერთ არქივს, მაგრამ 6.2 ეგრევე გამოხსნა ყველაფერი, ნუ ublock გადმოვწერე და მანდ შევნიშნე, ჯერ დესკტოპის პრობლემა მეგონა მაგრამ ეგ რომ გავასწორე მაინც არ უშველა, ეტყობა ვინრარშია რაღაცა არეული და უფლებების პრობლემა მგონია უფრო, 6.2 გასწორდა ეგრევე, დავუცდი ახალ ბეტას და შეიძლება იქ დაფიქსონ ეგ პრობლემა, აი ეხლა დავაყენე 6.21 ბეტა და ისევ გაუბერა, ისე პირველათ ბეტებზე რომ დავაფიქსირე ეგეთი ბაგი ვინრარში ,აქამდე არ ქონია გაბერვები, ხო ყველა არქივზე არა აქვს ეგ პრობლემა მარტო ზოგიერთებზე, 6.2 უკვე ყველაფერს ხსნის Quote Link to comment Share on other sites More sharing options...
George Posted February 21 Share Posted February 21 WinRAR 6.21 ფინალური ვერსია გამოვიდა შეიმდეგი ჩეინჯლოგით: Version 6.21 1. Both file and folder modification timestamps are restored when unpacking TAR and TAR based archives like tar.gz and tar.bz2. Previously only file modification timestamps were set for these archive formats. 2. Added decompression of .tar.zst archives with dictionary exceeding 128 MB. WinRAR 6.20 allowed such dictionary for .zst, but not for .tar.zst. 3. Switches -ed and -e+d are also supported by ZIP archives. Previously they worked only for RAR archives. 4. Bugs fixed: a) if unencrypted file was stored after encrypted in the same RAR archive and both files had been unpacked in the same extraction command, WinRAR 6.20 failed to unpack the unencrypted file; b) in some cases a wrong detailed reason of file open error could be displayed in the second line of open error message. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-621.exe Quote Link to comment Share on other sites More sharing options...
George Posted May 19 Share Posted May 19 WinRAR 6.22 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.22 beta 1 1. Bugs fixed: a) extracting individual files from solid archives created by RAR versions older than 2.0, could fail in WinRAR 6.20 and 6.21. It didn't affect extracting the entire archive, which was performed correctly; b) files in Unix ARJ archives could be erroneously displayed as folders in WinRAR file list; c) "Display files in Explorer" extraction option was ignored if "When done: Close WinRAR" option was also set and archive was opened in WinRAR before extracting; d) file size value in the internal viewer status bar didn't include the byte order mask field, displaying a smaller than actual size for Unicode files. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-622b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted June 5 Share Posted June 5 ერთი კვირის უკან WinRAR 6.22 ფინალური ბილდი დაიდო შემდეგი ჩეინჯლოგით: Version 6.22 1. Bugs fixed: a) extracting individual files from solid archives created by RAR versions older than 2.0, could fail in WinRAR 6.20 and 6.21. It didn't affect extracting the entire archive, which was performed correctly; b) files in Unix ARJ archives could be erroneously displayed as folders in WinRAR file list; c) "Display files in Explorer" extraction option was ignored if "When done: Close WinRAR" option was also set and archive was opened in WinRAR before extracting; d) file size value in the internal viewer status bar didn't include the byte order mask field, displaying a smaller than actual size for Unicode files. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-622.exe Quote Link to comment Share on other sites More sharing options...
George Posted July 21 Share Posted July 21 WinRAR 6.23 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.23 beta 1 1. Added extraction of XZ archives utilizing ARM64 filter. 2. Rar$LS* temporary files, created when extracting or testing multiple archives from Windows context menu, are now deleted immediately. Previously they were deleted only on next WinRAR runs and only if they were at least 1 hour old. 3. Bugs fixed: a) a security issue involving out of bounds write is fixed in RAR4 recovery volumes processing code. We are thankful to goodbyeselene working with Trend Micro Zero Day Initiative for letting us know about this bug; b) WinRAR could start a wrong file after a user double clicked an item in a specially crafted archive. We are thankful to Andrey Polovinkin from Group-IB Threat Intelligence unit for letting us know about this bug; c) if both NTFS and Unix time extra fields were available for a file in ZIP archive, extraction command ignored the second extra field even if it provided more time fields than first one; d) interface themes were applied to archive icons even if "Apply to archive icons" option in "Organize themes" dialog was turned off. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-623b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted August 2 Share Posted August 2 WinRAR 6.23 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: ესეც გა 1. Added extraction of XZ archives utilizing ARM64 filter. 2. Rar$LS* temporary files, created when extracting or testing multiple archives from Windows context menu, are now deleted immediately. Previously they were deleted only on next WinRAR runs and only if they were at least 1 hour old. 3. Bugs fixed: a) a security issue involving out of bounds write is fixed in RAR4 recovery volumes processing code. We are thankful to goodbyeselene working with Trend Micro Zero Day Initiative for letting us know about this bug; b) WinRAR could start a wrong file after a user double clicked an item in a specially crafted archive. We are thankful to Andrey Polovinkin from Group-IB Threat Intelligence unit for letting us know about this bug; c) if both NTFS and Unix time extra fields were available for a file in ZIP archive, extraction command ignored the second extra field even if it provided more time fields than first one; d) interface themes were applied to archive icons even if "Apply to archive icons" option in "Organize themes" dialog was turned off. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-623.exe Quote Link to comment Share on other sites More sharing options...
George Posted September 20 Share Posted September 20 WinRAR 6.24 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.24 beta 1 1. Bugs fixed: a) WinRAR and UnRAR.dll extraction command dereferenced a null pointer and crashed when processing a zero length archive name in the archive metadata stored with -am switch. We are thankful to Radoslaw Madej from Check Point software for reporting this issue; b) WinRAR and UnRAR.dll extraction command overwrote extracted file data with contents of ::$DATA NTFS alternate data stream, if such stream was present in the archive. In this case unpacked data size and checksum could mismatch file size and checksum displayed in WinRAR file list. It didn't affect file name and type, which were displayed properly. We are thankful to Ata Hakcil for reporting this issue. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-624b1.exe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.