Jump to content

The Perfect Server - Ubuntu 10.10 [ISPConfig 3]


Boss

Recommended Posts

his tutorial shows how to prepare an Ubuntu 10.10 (Maverick Meerkat) server for the installation of ISPConfig 3, and how to install ISPConfig 3. ISPConfig 3 is a webhosting control panel that allows you to configure the following services through a web browser: Apache web server, Postfix mail server, MySQL, BIND or MyDNS nameserver, PureFTPd, SpamAssassin, ClamAV, and many more.

Please note that this setup does not work for ISPConfig 2! It is valid for ISPConfig 3 only!

In order to learn how to use ISPConfig 3, I strongly recommend to download the ISPConfig 3 Manual.

On nearly 300 pages, it covers the concept behind ISPConfig (admin, resellers, clients), explains how to install and update ISPConfig 3, includes a reference for all forms and form fields in ISPConfig together with examples of valid inputs, and provides tutorials for the most common tasks in ISPConfig 3. It also lines out how to make your server more secure and comes with a troubleshooting section at the end.

I do not issue any guarantee that this tutorial will work for you!

1 Requirements

To install such a system you will need the following:

the Ubuntu 10.10 server CD, available here: http://releases.ubuntu.com/releases/10.10/ubuntu-10.10-server-i386.iso (i386) or http://releases.ubuntu.com/releases/10.10/ubuntu-10.10-server-amd64.iso (x86_64)

a fast Internet connection.

2 Preliminary Note

In this tutorial I use the hostname server1.example.com with the IP address 192.168.0.100 and the gateway 192.168.0.1. These settings might differ for you, so you have to replace them where appropriate.

3 The Base System

Insert your Ubuntu install CD into your system and boot from it. Select your language:

1.png

Then select Install Ubuntu Server:

2.png

Choose your language again (?):

3.png

Then select your location:

4.png

5.png

6.png

Choose a keyboard layout (you will be asked to press a few keys, and the installer will try to detect your keyboard layout based on the keys you pressed):

7.png

8.png

The installer checks the installation CD, your hardware, and configures the network with DHCP if there is a DHCP server in the network:

9.png

10.png

Enter the hostname. In this example, my system is called server1.example.com, so I enter server1:

11.png

Please check if the installer detected your time zone correctly. If so, select Yes, otherwise No:

12.png

Now you have to partition your hard disk. For simplicity's sake I select Guided - use entire disk and set up LVM - this will create one volume group with two logical volumes, one for the / file system and another one for swap (of course, the partitioning is totally up to you - if you know what you're doing, you can also set up your partitions manually).

13.png

Select the disk that you want to partition:

14.png

When you're asked Write the changes to disks and configure LVM?, select Yes:

15.png

If you have selected Guided - use entire disk and set up LVM, the partitioner will create one big volume group that uses all the disk space. You can now specify how much of that disk space should be used by the logical volumes for / and swap. It makes sense to leave some space unused so that you can later on expand your existing logical volumes or create new ones - this gives you more flexibility.

16.png

When you're finished, hit Yes when you're asked Write the changes to disks?:

17.png

Afterwards, your new partitions are being created and formatted:

18.png

Now the base system is being installed:

19.png

Create a user, for example the user Administrator with the user name administrator (don't use the user name admin as it is a reserved name on Ubuntu 10.10):

20.png

21.png

22.png

23.png

I don't need an encrypted private directory, so I choose No here:

24.png

Next the package manager apt gets configured. Leave the HTTP proxy line empty unless you're using a proxy server to connect to the Internet:

26.png

27.png

I'm a little bit old-fashioned and like to update my servers manually to have more control, therefore I select No automatic updates. Of course, it's up to you what you select here:

29.png

We need a DNS, mail, and LAMP server, but nevertheless I don't select any of them now because I like to have full control over what gets installed on my system. We will install the needed packages manually later on. The only item I select here is OpenSSH server so that I can immediately connect to the system with an SSH client such as PuTTY after the installation has finished:

30.png

The installation continues:

31.png

The GRUB boot loader gets installed:

32.png

Select Yes when you are asked Install the GRUB boot loader to the master boot record?:

33.png

The base system installation is now finished. Remove the installation CD from the CD drive and hit Continue to reboot the system:

34.png

4 Get root Privileges

After the reboot you can login with your previously created username (e.g. administrator). Because we must run all the steps from this tutorial with root privileges, we can either prepend all commands in this tutorial with the string sudo, or we become root right now by typing

sudo su

(You can as well enable the root login by running

sudo passwd root

and giving root a password. You can then directly log in as root, but this is frowned upon by the Ubuntu developers and community for various reasons. See http://ubuntuforums.org/showthread.php?t=765414.)

5 Install The SSH Server (Optional)

If you did not install the OpenSSH server during the system installation, you can do it now:

aptitude install ssh openssh-server
From now on you can use an SSH client such as PuTTY and connect from your workstation to your Ubuntu 10.10 server and follow the remaining steps from this tutorial. 6 Install vim-nox (Optional) I'll use vi as my text editor in this tutorial. The default vi program has some strange behaviour on Ubuntu and Debian; to fix this, we install vim-nox:
aptitude install vim-nox
(You don't have to do this if you use a different text editor such as joe or nano.) 7 Configure The Network Because the Ubuntu installer has configured our system to get its network settings via DHCP, we have to change that now because a server should have a static IP address. Edit /etc/network/interfaces and adjust it to your needs (in this example setup I will use the IP address 192.168.0.100):
vi /etc/network/interfaces
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1
Then restart your network:
/etc/init.d/networking restart
Then edit /etc/hosts. Make it look like this:
vi /etc/hosts
127.0.0.1 localhost.localdomain localhost 192.168.0.100 server1.example.com server1 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters
Now run
echo server1.example.com > /etc/hostname

/etc/init.d/hostname restart
Afterwards, run
hostname

hostname -f
Both should show server1.example.com now. 8 Edit /etc/apt/sources.list And Update Your Linux Installation Edit /etc/apt/sources.list. Comment out or remove the installation CD from the file and make sure that the universe and multiverse repositories are enabled. It should look like this:
vi /etc/apt/sources.list
# # deb cdrom:[ubuntu-Server 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted #deb cdrom:[ubuntu-Server 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://de.archive.ubuntu.com/ubuntu/ maverick main restricted deb-src http://de.archive.ubuntu.com/ubuntu/ maverick main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://de.archive.ubuntu.com/ubuntu/ maverick-updates main restricted deb-src http://de.archive.ubuntu.com/ubuntu/ maverick-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://de.archive.ubuntu.com/ubuntu/ maverick universe deb-src http://de.archive.ubuntu.com/ubuntu/ maverick universe deb http://de.archive.ubuntu.com/ubuntu/ maverick-updates universe deb-src http://de.archive.ubuntu.com/ubuntu/ maverick-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://de.archive.ubuntu.com/ubuntu/ maverick multiverse deb-src http://de.archive.ubuntu.com/ubuntu/ maverick multiverse deb http://de.archive.ubuntu.com/ubuntu/ maverick-updates multiverse deb-src http://de.archive.ubuntu.com/ubuntu/ maverick-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://de.archive.ubuntu.com/ubuntu/ maverick-backports main restricted universe multiverse # deb-src http://de.archive.ubuntu.com/ubuntu/ maverick-backports main restricted universe multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu maverick partner # deb-src http://archive.canonical.com/ubuntu maverick partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu maverick main # deb-src http://extras.ubuntu.com/ubuntu maverick main deb http://security.ubuntu.com/ubuntu maverick-security main restricted deb-src http://security.ubuntu.com/ubuntu maverick-security main restricted deb http://security.ubuntu.com/ubuntu maverick-security universe deb-src http://security.ubuntu.com/ubuntu maverick-security universe deb http://security.ubuntu.com/ubuntu maverick-security multiverse deb-src http://security.ubuntu.com/ubuntu maverick-security multiverse
Then run
aptitude update

to update the apt package database and
aptitude safe-upgrade

to install the latest updates (if there are any). If you see that a new kernel gets installed as part of the updates, you should reboot the system afterwards:
reboot
9 Change The Default Shell /bin/sh is a symlink to /bin/dash, however we need /bin/bash, not /bin/dash. Therefore we do this:
dpkg-reconfigure dash
Install dash as /bin/sh? <-- No If you don't do this, the ISPConfig installation will fail. 10 Disable AppArmor AppArmor is a security extension (similar to SELinux) that should provide extended security. In my opinion you don't need it to configure a secure system, and it usually causes more problems than advantages (think of it after you have done a week of trouble-shooting because some service wasn't working as expected, and then you find out that everything was ok, only AppArmor was causing the problem). Therefore I disable it (this is a must if you want to install ISPConfig later on). We can disable it like this:
/etc/init.d/apparmor stop

update-rc.d -f apparmor remove

aptitude remove apparmor apparmor-utils
11 Synchronize the System Clock It is a good idea to synchronize the system clock with an NTP (network time protocol) server over the Internet. Simply run aptitude install ntp ntpdate and your system time will always be in sync. 12 Install Postfix, Courier, Saslauthd, MySQL, rkhunter, binutils We can install Postfix, Courier, Saslauthd, MySQL, rkhunter, and binutils with a single command: aptitude install postfix postfix-mysql postfix-doc mysql-client mysql-server courier-authdaemon courier-authlib-mysql courier-pop courier-pop-ssl courier-imap courier-imap-ssl libsasl2-2 libsasl2-modules libsasl2-modules-sql sasl2-bin libpam-mysql openssl getmail4 rkhunter binutils maildrop You will be asked the following questions: New password for the MySQL "root" user: <-- yourrootsqlpassword Repeat password for the MySQL "root" user: <-- yourrootsqlpassword Create directories for web-based administration? <-- No General type of mail configuration: <-- Internet Site System mail name: <-- server1.example.com SSL certificate required <-- Ok We want MySQL to listen on all interfaces, not just localhost, therefore we edit /etc/mysql/my.cnf and comment out the line bind-address = 127.0.0.1:
vi /etc/mysql/my.cnf
[...] # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 [...]
Then we restart MySQL:
/etc/init.d/mysql restart
Now check that networking is enabled. Run
netstat -tap | grep mysql
The output should look like this: root@server1:~# netstat -tap | grep mysql tcp 0 0 *:mysql *:* LISTEN 9815/mysqld root@server1:~# During the installation, the SSL certificates for IMAP-SSL and POP3-SSL are created with the hostname localhost. To change this to the correct hostname (server1.example.com in this tutorial), delete the certificates...
cd /etc/courier

rm -f /etc/courier/imapd.pem

rm -f /etc/courier/pop3d.pem
... and modify the following two files; replace CN=localhost with CN=server1.example.com (you can also modify the other values, if necessary):
vi /etc/courier/imapd.cnf
[...] CN=server1.example.com [...]
vi /etc/courier/pop3d.cnf
[...] CN=server1.example.com [...]
Then recreate the certificates...
mkimapdcert

mkpop3dcert
... and restart Courier-IMAP-SSL and Courier-POP3-SSL:
/etc/init.d/courier-imap-ssl restart

/etc/init.d/courier-pop-ssl restart
13 Install Amavisd-new, SpamAssassin, And Clamav To install amavisd-new, SpamAssassin, and ClamAV, we run
aptitude install amavisd-new spamassassin clamav clamav-daemon zoo unzip bzip2 arj nomarch lzop cabextract apt-listchanges libnet-ldap-perl libauthen-sasl-perl clamav-docs daemon libio-string-perl libio-socket-ssl-perl libnet-ident-perl zip libnet-dns-perl
14 Install Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, And mcrypt Apache2, PHP5, phpMyAdmin, FCGI, suExec, Pear, and mcrypt can be installed as follows:
aptitude install apache2 apache2.2-common apache2-doc apache2-mpm-prefork apache2-utils libexpat1 ssl-cert libapache2-mod-php5 php5 php5-common php5-gd php5-mysql php5-imap phpmyadmin php5-cli php5-cgi libapache2-mod-fcgid apache2-suexec php-pear php-auth php5-mcrypt mcrypt php5-imagick imagemagick libapache2-mod-suphp libopenssl-ruby libapache2-mod-ruby
You will see the following question: Web server to reconfigure automatically: <-- apache2 Configure database for phpmyadmin with dbconfig-common? <-- No Then run the following command to enable the Apache modules suexec, rewrite, ssl, actions, and include (plus dav, dav_fs, and auth_digest if you want to use WebDAV):
a2enmod suexec rewrite ssl actions include

a2enmod dav_fs dav auth_digest

Restart Apache afterwards:
/etc/init.d/apache2 restart

15 Install PureFTPd And Quota PureFTPd and quota can be installed with the following command:
aptitude install pure-ftpd-common pure-ftpd-mysql quota quotatool

Edit the file /etc/default/pure-ftpd-common...
vi /etc/default/pure-ftpd-common

... and make sure that the start mode is set to standalone and set VIRTUALCHROOT=true:
[...] STANDALONE_OR_INETD=standalone [...] VIRTUALCHROOT=true [...]
Now we configure PureFTPd to allow FTP and TLS sessions. FTP is a very insecure protocol because all passwords and all data are transferred in clear text. By using TLS, the whole communication can be encrypted, thus making FTP much more secure. If you want to allow FTP and TLS sessions, run
echo 1 > /etc/pure-ftpd/conf/TLS

In order to use TLS, we must create an SSL certificate. I create it in /etc/ssl/private/, therefore I create that directory first:
mkdir -p /etc/ssl/private/

Afterwards, we can generate the SSL certificate as follows:
openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout /etc/ssl/private/pure-ftpd.pem -out /etc/ssl/private/pure-ftpd.pem

Country Name (2 letter code) [AU]: <-- Enter your Country Name (e.g., "DE"). State or Province Name (full name) [some-State]: <-- Enter your State or Province Name. Locality Name (eg, city) []: <-- Enter your City. Organization Name (eg, company) [internet Widgits Pty Ltd]: <-- Enter your Organization Name (e.g., the name of your company). Organizational Unit Name (eg, section) []: <-- Enter your Organizational Unit Name (e.g. "IT Department"). Common Name (eg, YOUR name) []: <-- Enter the Fully Qualified Domain Name of the system (e.g. "server1.example.com"). Email Address []: <-- Enter your Email Address. Change the permissions of the SSL certificate:
chmod 600 /etc/ssl/private/pure-ftpd.pem

Then restart PureFTPd:
/etc/init.d/pure-ftpd-mysql restart

Edit /etc/fstab. Mine looks like this (I added ,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 to the partition with the mount point /):
vi /etc/fstab
# /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/server1-root / ext4 errors=remount-ro,usrjquota=quota.user,grpjquota=quota.group,jqfmt=vfsv0 0 1 # /boot was on /dev/sda1 during installation UUID=a8f37dcf-5836-485c-a451-3ae2f0f47720 /boot ext2 defaults 0 2 /dev/mapper/server1-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
To enable quota, run these commands:
mount -o remount /

quotacheck -avugm

quotaon -avug
16 Install BIND DNS Server BIND can be installed as follows:
aptitude install bind9 dnsutils
17 Install Vlogger, Webalizer, And AWstats Vlogger, webalizer, and AWstats can be installed as follows:
aptitude install vlogger webalizer awstats

18 Install Jailkit Jailkit is needed only if you want to chroot SSH users. It can be installed as follows (important: Jailkit must be installed before ISPConfig - it cannot be installed afterwards!):
aptitude install build-essential autoconf automake1.9 libtool flex bison debhelper

cd /tmp

wget http://olivier.sessink.nl/jailkit/jailkit-2.12.tar.gz

tar xvfz jailkit-2.12.tar.gz

cd jailkit-2.12

./debian/rules binary

cd ..

dpkg -i jailkit_2.12-1_*.deb

rm -rf jailkit-2.12*
19 Install fail2ban This is optional but recommended, because the ISPConfig monitor tries to show the fail2ban log:
aptitude install fail2ban

20 Install SquirrelMail To install the SquirrelMail webmail client, run
aptitude install squirrelmail

Then create the following symlink...
ln -s /usr/share/squirrelmail/ /var/www/webmail

... and configure SquirrelMail:
squirrelmail-configure

We must tell SquirrelMail that we are using Courier-IMAP/-POP3: SquirrelMail Configuration : Read: config.php (1.4.0) --------------------------------------------------------- Main Menu -- 1. Organization Preferences 2. Server Settings 3. Folder Defaults 4. General Options 5. Themes 6. Address Books 7. Message of the Day (MOTD) 8. Plugins 9. Database 10. Languages D. Set pre-defined settings for specific IMAP servers C Turn color on S Save data Q Quit Command >> <-- D SquirrelMail Configuration : Read: config.php --------------------------------------------------------- While we have been building SquirrelMail, we have discovered some preferences that work better with some servers that don't work so well with others. If you select your IMAP server, this option will set some pre-defined settings for that server. Please note that you will still need to go through and make sure everything is correct. This does not change everything. There are only a few settings that this will change. Please select your IMAP server: bincimap = Binc IMAP server courier = Courier IMAP server cyrus = Cyrus IMAP server dovecot = Dovecot Secure IMAP server exchange = Microsoft Exchange IMAP server hmailserver = hMailServer macosx = Mac OS X Mailserver mercury32 = Mercury/32 uw = University of Washington's IMAP server gmail = IMAP access to Google mail (Gmail) accounts quit = Do not change anything Command >> <-- courier SquirrelMail Configuration : Read: config.php --------------------------------------------------------- While we have been building SquirrelMail, we have discovered some preferences that work better with some servers that don't work so well with others. If you select your IMAP server, this option will set some pre-defined settings for that server. Please note that you will still need to go through and make sure everything is correct. This does not change everything. There are only a few settings that this will change. Please select your IMAP server: bincimap = Binc IMAP server courier = Courier IMAP server cyrus = Cyrus IMAP server dovecot = Dovecot Secure IMAP server exchange = Microsoft Exchange IMAP server hmailserver = hMailServer macosx = Mac OS X Mailserver mercury32 = Mercury/32 uw = University of Washington's IMAP server quit = Do not change anything Command >> courier imap_server_type = courier default_folder_prefix = INBOX. trash_folder = Trash sent_folder = Sent draft_folder = Drafts show_prefix_option = false default_sub_of_inbox = false show_contain_subfolders_option = false optional_delimiter = . delete_folder = true Press any key to continue... <-- ENTER SquirrelMail Configuration : Read: config.php (1.4.0) --------------------------------------------------------- Main Menu -- 1. Organization Preferences 2. Server Settings 3. Folder Defaults 4. General Options 5. Themes 6. Address Books 7. Message of the Day (MOTD) 8. Plugins 9. Database 10. Languages D. Set pre-defined settings for specific IMAP servers C Turn color on S Save data Q Quit Command >> <-- S SquirrelMail Configuration : Read: config.php (1.4.0) --------------------------------------------------------- Main Menu -- 1. Organization Preferences 2. Server Settings 3. Folder Defaults 4. General Options 5. Themes 6. Address Books 7. Message of the Day (MOTD) 8. Plugins 9. Database 10. Languages D. Set pre-defined settings for specific IMAP servers C Turn color on S Save data Q Quit Command >> S Data saved in config.php Press enter to continue... <-- ENTER SquirrelMail Configuration : Read: config.php (1.4.0) --------------------------------------------------------- Main Menu -- 1. Organization Preferences 2. Server Settings 3. Folder Defaults 4. General Options 5. Themes 6. Address Books 7. Message of the Day (MOTD) 8. Plugins 9. Database 10. Languages D. Set pre-defined settings for specific IMAP servers C Turn color on S Save data Q Quit Command >> <-- Q Afterwards you can access SquirrelMail under http://server1.example.com/webmail or http://192.168.0.100/webmail: 35.png 21 Install ISPConfig 3 To install ISPConfig 3 from the latest released version, do this:
cd /tmp

wget http://www.ispconfig.org/downloads/ISPConfig-3-stable.tar.gz

tar xfz ISPConfig-3-stable.tar.gz

cd ispconfig3_install/install/
he next step is to run
php -q install.php

This will start the ISPConfig 3 installer. The installer will configure all services like Postfix, SASL, Courier, etc. for you. A manual setup as required for ISPConfig 2 (perfect setup guides) is not necessary.
root@server1:/tmp/ispconfig3_install/install# php -q install.php

-------------------------------------------------------------------------------- _____ ___________ _____ __ _ ____ |_ _/ ___| ___ \ / __ \ / _(_) /__ \ | | \ `--.| |_/ / | / \/ ___ _ __ | |_ _ __ _ _/ / | | `--. \ __/ | | / _ \| '_ \| _| |/ _` | |_ | _| |_/\__/ / | | \__/\ (_) | | | | | | | (_| | ___\ \ \___/\____/\_| \____/\___/|_| |_|_| |_|\__, | \____/ __/ | |___/ -------------------------------------------------------------------------------- >> Initial configuration Operating System: Debian 6.0 (Squeeze/Sid) or compatible Following will be a few questions for primary configuration so be careful. Default values are in [brackets] and can be accepted with <ENTER>. Tap in "quit" (without the quotes) to stop the installer. Select language (en,de) [en]: <-- ENTER Installation mode (standard,expert) [standard]: <-- ENTER Full qualified hostname (FQDN) of the server, eg server1.domain.tld [server1.example.com]: <-- ENTER MySQL server hostname [localhost]: <-- ENTER MySQL root username [root]: <-- ENTER MySQL root password []: <-- yourrootsqlpassword MySQL database to create [dbispconfig]: <-- ENTER MySQL charset [utf8]: <-- ENTER Generating a 2048 bit RSA private key ......................+++ .............................................................+++ writing new private key to 'smtpd.key' ----- You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [AU]: <-- ENTER State or Province Name (full name) [some-State]: <-- ENTER Locality Name (eg, city) []: <-- ENTER Organization Name (eg, company) [internet Widgits Pty Ltd]: <-- ENTER Organizational Unit Name (eg, section) []: <-- ENTER Common Name (eg, YOUR name) []: <-- ENTER Email Address []: <-- ENTER Configuring Jailkit Configuring SASL Configuring PAM Configuring Courier Configuring Spamassassin Configuring Amavisd Configuring Getmail Configuring Pureftpd Configuring BIND Configuring Apache Configuring Vlogger Configuring Apps vhost Configuring Firewall Installing ISPConfig ISPConfig Port [8080]: <-- ENTER Configuring DBServer Installing ISPConfig crontab no crontab for root no crontab for getmail Restarting services ... Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service mysql restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the restart(8) utility, e.g. restart mysql mysql start/running, process 25572 * Stopping Postfix Mail Transport Agent postfix ...done. * Starting Postfix Mail Transport Agent postfix ...done. * Stopping SASL Authentication Daemon saslauthd ...done. * Starting SASL Authentication Daemon saslauthd ...done. Stopping amavisd: amavisd-new. Starting amavisd: amavisd-new. * Stopping ClamAV daemon clamd ...done. * Starting ClamAV daemon clamd ...done. * Stopping Courier authentication services authdaemond ...done. * Starting Courier authentication services authdaemond ...done. * Stopping Courier IMAP server imapd ...done. * Starting Courier IMAP server imapd ...done. * Stopping Courier IMAP-SSL server imapd-ssl ...done. * Starting Courier IMAP-SSL server imapd-ssl ...done. * Stopping Courier POP3 server... ...done. * Starting Courier POP3 server... ...done. * Stopping Courier POP3-SSL server... ...done. * Starting Courier POP3-SSL server... ...done. * Restarting web server apache2 ... waiting ............. ...done. Restarting ftp server: Running: /usr/sbin/pure-ftpd-mysql-virtualchroot -l mysql:/etc/pure-ftpd/db/mysql.conf -l pam -O clf:/var/log/pure-ftpd/transfer.log -D -H -b -A -Y 1 -u 1000 -8 UTF-8 -E -B Installation completed. root@server1:/tmp/ispconfig3_install/install# The installer automatically configures all underlying services, so no manual configuration is needed. Afterwards you can access ISPConfig 3 under http://server1.example.com:8080/ or http://192.168.0.100:8080/. Log in with the username admin and the password admin (you should change the default password after your first login): 36.png37.png The system is now ready to be used. 21.1 ISPConfig 3 Manual In order to learn how to use ISPConfig 3, I strongly recommend to download the ISPConfig 3 Manual. On nearly 300 pages, it covers the concept behind ISPConfig (admin, resellers, clients), explains how to install and update ISPConfig 3, includes a reference for all forms and form fields in ISPConfig together with examples of valid inputs, and provides tutorials for the most common tasks in ISPConfig 3. It also lines out how to make your server more secure and comes with a troubleshooting section at the end. 22 Additional Notes If the Ubuntu server that you've just set up in this tutorial is an OpenVZ container (virtual machine), you should do this on the host system (I'm assuming that the ID of the OpenVZ container is 101 - replace it with the correct VPSID on your system):
VPSID=101

for CAP in CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE CHOWN DAC_READ_SEARCH SETGID SETUID NET_BIND_SERVICE NET_ADMIN SYS_CHROOT SYS_NICE

do

  vzctl set $VPSID --capability ${CAP}:on --save

done

The Perfect Server - Ubuntu 10.10 [iSPConfig 3]

Link to comment
Share on other sites

  • 1 year later...
  • 2 weeks later...

მალე ისევ განვაახლებ ამ ბლოგის წერას. და შემდეგში უფრო ქართულად იქნება ხოლმე ყველაფერი.

blog.mhosti.com

blog.dati.com

და რათქმაუნდა ამ თემაში :)

Link to comment
Share on other sites

  • Barca locked this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.