George Posted October 29, 2022 Share Posted October 29, 2022 გრძელვადიანი პერერივის შემდეგ ახალი WinRAR 6.20 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.20 beta 1 1. If "Autodetect passwords" option in "Organizer passwords" dialog is enabled and password matching a processing archive is present among saved passwords, it is applied automatically. This option is applicable only for archives in RAR 5.0 and ZIP formats, which allow to verify the password validity quickly. There is a minor chance of incorrect password detection for ZIP archives if stored passwords do not include a proper one. If encrypted ZIP archive extraction fails, you can try to disable this option, repeat extraction and enter a valid password manually. 2. If extraction command involves only a part of files in RAR archive, the additional archive analysis is performed when starting extraction. It helps to properly unpack file references even if reference source is not selected. It works for most of RAR archives except for volumes on multiple removable media and archives containing a very large number of references. Also in some cases such analysis may help to optimize the amount of processing data when extracting individual files from semi-solid archives created with -s<N> and -se switches. 3. "Save original archive name and time" option on "Options" page of archiving dialog allows to save the original archive name and creation time. If archive includes such saved name and time, they are displayed on "Info" page of "Show information" command and can be restored on "Options" page of same command. Restoring involves renaming an archive to original name and setting the saved time as the archive creation and modification time. Switch -ams or just -am together with archive modification commands can be used to save the archive name and time in the command line mode. These saved parameters are displayed in header of "l" and "v" commands output and can be restored with -amr switch combined with "ch" command, such as "rar ch -amr arc.rar". If -amr is specified, "ch" ignores other archive modification switches. 4. Faster RAR5 compression of poorly compressible data on modern CPUs with 8 or more execution threads. This applies to all methods except "Fastest", which performance remains the same. 5. "Repair" command efficiency is improved for shuffled data blocks in recovery record protected RAR5 archives. 6. If file size has grown after archiving when creating non-solid RAR volumes, such file is stored without compression regardless of volume number, provided that file isn't split between volumes. Previously it worked only for files in the first volume. 7. Added decompression of .zipx archives containing file references, provided that both reference source and target are selected and reference source precedes the target inside of archive. Typically, if .zipx archive includes file references, it is necessary to unpack the entire archive to extract references successfully. 8. Added decompression of .zst long range mode archives with dictionary exceeding 128 MB. Previously it was possible to decompress them only if dictionary was 128 MB or less. 9. If "Turn PC off", "Hibernate", "Sleep" or "Restart PC" archiving options are enabled in WinRAR, a prompt to confirm or cancel such power management action is displayed directly before starting it. If no selection was made by user for 30 seconds, the proposed action is confirmed and started automatically. This prompt is also displayed for -ioff switch in WinRAR command line, but not in console RAR command line. 10. Context menu in WinRAR file list provides "Open in internal viewer" command for archive files. It can be helpful if you wish to view the archive raw data in internal viewer. For example, to read an email archive with UUE attachments included. Usual "View" command always displays the archive contents. If file is recognized as UUE archive, "View" would show UUE attachments. 11. Recovery record size is displayed on "Archive" page of file properties invoked from Explorer context menu for archives in RAR5 format. Previously there was only "Present" instead of exact size for RAR5 archives. 12. When archiving from stdin with -si switch, RAR displays the current amount of read bytes as the progress indicator. 13. If wrong password is specified when adding files to encrypted solid RAR5 archive, a password will be requested again. Previous versions cancelled archiving in this case. 14. If both options "Test archived files" and "Clear attribute "Archive" after compressing" or their command line -t -ac equivalents are enabled when archiving, "Archive" attribute will be cleared only if test was completed successfully. Previously it was cleared even when test reported errors. 15. NoDrives value containing the bit mask to hide drives can be now read from "HKEY_CURRENT_USER\Software\WinRAR\Policy" Registry key, which allows to include it to winrar.ini if necessary. Its "Software\Microsoft\Windows\CurrentVersion\Policies" locations in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE are also supported. Previously only "Software\Microsoft\Windows\CurrentVersion\Policies" in HKEY_CURRENT_USER was recognized. 16. Bugs fixed: a) archive modification commands could fail for some ZIP archives with file comments; b) fixed a memory leak when reading contents of .tar.bz2 archives; c) if source and resulting archive format is the same, the archive conversion command didn't set the original archive time to a newly created archive even if "Original archive time" option was selected in archiving parameters; d) if "Merge volumes contents" option in "Settings/File list" was turned on, the folder packed size in WinRAR file list could be less than expected when browsing a multivolume archive contents. It didn't include the packed size of file parts continuing from previous volume into calculation; e) even if "Set file security" extraction option was turned off by default, extraction commands in Explorer context menu still attempted to restore NTFS file security data. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted November 20, 2022 Share Posted November 20, 2022 WinRAR 6.20 beta 2 დაიდო რამდენიმე დღის უკან შემდეგი ჩეინჯლოგით: Version 6.20 beta 2 1. If Zone.Identifier alternate NTFS stream, also known as Mark of the Web, is present both in archived office document file and host archive and if archive security zone is set to "Internet" or "Restricted sites", WinRAR sets the host archive stream to unpacked file and ignores the archived file stream. 2. Bugs fixed: a) updating an existing archive in RAR5 format could result in broken archive data in beta 1 if existing archive included the archive comment, encrypted file names and was created by version older than WinRAR 6.20; b) updating an archive with -ver -ow -s switches failed with checksum error if -ver removed old archived file versions. Without -s, it could produce a larger than necessary archive with redundant NTFS security data records. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620b2.exe Quote Link to comment Share on other sites More sharing options...
Dreamliner Posted November 30, 2022 Share Posted November 30, 2022 portable ვერსია სად შეიძლება ვნახო? Quote Link to comment Share on other sites More sharing options...
George Posted November 30, 2022 Share Posted November 30, 2022 ინგლისური ფინალური ბილდი თუ გინდოდა და არა ეგ ბოლო ბეტა ოფიციალური ლინკი არ უდევთ, მარტო ლევი სბორკების გადმოწერა შეგიძლია ან რეპაკების, აი ერთ-ერთი ეგეთი ესაა: http://portableappz.blogspot.com/2012/06/winrar-420-32-64-bit-multilingual.html სხვა მე ვერ ვნახე რაღაც, თვითონ მაგათ საიტზე არ დევს ეგეთი ვარიანტი 1 Quote Link to comment Share on other sites More sharing options...
Dreamliner Posted December 1, 2022 Share Posted December 1, 2022 არ დავეძებ, მთავარია ფლეშკაზე იმუშაოს. გაიხარე! ეგ საიტი ვეღარ გავიხსენე. Quote Link to comment Share on other sites More sharing options...
George Posted December 16, 2022 Share Posted December 16, 2022 WinRAR 6.20 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.20 beta 3 1. If Zone.Identifier alternate NTFS stream, also known as Mark of the Web, is present both in archived office document file and host archive, WinRAR sets a stream with more restricted security zone to unpacked file. Previous beta always preferred the archive security zone if it was "Internet" or "Restricted sites". We are thankful to Amine Brahmi for bringing our attention to conflicting Zone.Identifier streams in this case. 2. "Archive" page in archive properties in Windows Explorer: a) "Original name" and "Original time" field names are not displayed anymore for non-RAR archives; b) the compression dictionary size is displayed also for non-RAR archives when available. 3. Bugs fixed: a) if "Launch folder windows in a separate process" Windows Explorer option was enabled in Windows 11 22H2, in some cases WinRAR context menu items didn't perform any action on a click; b) WinRAR could read data beyond the end of buffer and crash when unpacking files from specially crafted ZIP archive. We are thankful to Bakker working with Trend Micro Zero Day Initiative for letting us know about this bug. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620b3.exe Quote Link to comment Share on other sites More sharing options...
George Posted January 24, 2023 Share Posted January 24, 2023 WinRAR 6.20 ფინალური ვერსია გამოვიდა შეიმდეგი ჩეინჯლოგით: Version 6.20 1. If "Autodetect passwords" option in "Organizer passwords" dialog is enabled and password matching a processing archive is present among saved passwords, it is applied automatically. This option is applicable only for archives in RAR 5.0 and ZIP formats, which allow to verify the password validity quickly. There is a minor chance of incorrect password detection for ZIP archives if stored passwords do not include a proper one. If encrypted ZIP archive extraction fails, you can try to disable this option, repeat extraction and enter a valid password manually. 2. If extraction command involves only a part of files in RAR archive, the additional archive analysis is performed when starting extraction. It helps to properly unpack file references even if reference source is not selected. It works for most of RAR archives except for volumes on multiple removable media and archives containing a very large number of references. Also in some cases such analysis may help to optimize the amount of processing data when extracting individual files from semi-solid archives created with -s and -se switches. 3. "Save original archive name and time" option on "Options" page of archiving dialog allows to save the original archive name and creation time. If archive includes such saved name and time, they are displayed on "Info" page of "Show information" command and can be restored on "Options" page of same command. Restoring involves renaming an archive to original name and setting the saved time as the archive creation and modification time. Switch -ams or just -am together with archive modification commands can be used to save the archive name and time in the command line mode. These saved parameters are displayed in header of "l" and "v" commands output and can be restored with -amr switch combined with "ch" command, such as "rar ch -amr arc.rar". If -amr is specified, "ch" ignores other archive modification switches. 4. Faster RAR5 compression of poorly compressible data on modern CPUs with 8 or more execution threads. This applies to all methods except "Fastest", which performance remains the same. 5. "Repair" command efficiency is improved for shuffled data blocks in recovery record protected RAR5 archives. 6. If file size has grown after archiving when creating non-solid RAR volumes, such file is stored without compression regardless of volume number, provided that file isn't split between volumes. Previously it worked only for files in the first volume. 7. Added decompression of .zipx archives containing file references, provided that both reference source and target are selected and reference source precedes the target inside of archive. Typically, if .zipx archive includes file references, it is necessary to unpack the entire archive to extract references successfully. 8. Added decompression of .zst long range mode archives with dictionary exceeding 128 MB. Previously it was possible to decompress them only if dictionary was 128 MB or less. 9. If "Turn PC off", "Hibernate", "Sleep" or "Restart PC" archiving options are enabled in WinRAR, a prompt to confirm or cancel such power management action is displayed directly before starting it. If no selection was made by user for 30 seconds, the proposed action is confirmed and started automatically. This prompt is also displayed for -ioff switch in WinRAR command line, but not in console RAR command line. 10. Context menu in WinRAR file list provides "Open in internal viewer" command for archive files. It can be helpful if you wish to view the archive raw data in internal viewer. For example, to read an email archive with UUE attachments included. Usual "View" command always displays the archive contents. If file is recognized as UUE archive, "View" would show UUE attachments. 11. Recovery record size is displayed on "Archive" page of file properties invoked from Explorer context menu for archives in RAR5 format. Previously there was only "Present" instead of exact size for RAR5 archives. 12. When archiving from stdin with -si switch, RAR displays the current amount of read bytes as the progress indicator. 13. If wrong password is specified when adding files to encrypted solid RAR5 archive, a password will be requested again. Previous versions cancelled archiving in this case. 14. If both options "Test archived files" and "Clear attribute "Archive" after compressing" or their command line -t -ac equivalents are enabled when archiving, "Archive" attribute will be cleared only if test was completed successfully. Previously it was cleared even when test reported errors. 15. NoDrives value containing the bit mask to hide drives can be now read from "HKEY_CURRENT_USER\Software\WinRAR\Policy" Registry key, which allows to include it to winrar.ini if necessary. Its "Software\Microsoft\Windows\CurrentVersion\Policies" locations in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE are also supported. Previously only "Software\Microsoft\Windows\CurrentVersion\Policies" in HKEY_CURRENT_USER was recognized. 16. Bugs fixed: a) archive modification commands could fail for some ZIP archives with file comments; b) fixed a memory leak when reading contents of .tar.bz2 archives; c) if source and resulting archive format is the same, the archive conversion command didn't set the original archive time to a newly created archive even if "Original archive time" option was selected in archiving parameters; d) if "Merge volumes contents" option in "Settings/File list" was turned on, the folder packed size in WinRAR file list could be less than expected when browsing a multivolume archive contents. It didn't include the packed size of file parts continuing from previous volume into calculation; e) even if "Set file security" extraction option was turned off by default, extraction commands in Explorer context menu still attempted to restore NTFS file security data; f) WinRAR could read data beyond the end of buffer and crash when unpacking files from specially crafted ZIP archive. We are thankful to Bakker working with Trend Micro Zero Day Initiative for letting us know about this bug. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-620.exe აგრეთვე დაიდო უკვე WinRAR 6.21 beta 1 ბილდიც შემდეგი ჩეინჯლოგით: Version 6.21 beta 1 1. Switches -ed and -e+d are also supported by ZIP archives. Previously they worked only for RAR archives. 2. Bugs fixed: a) if unencrypted file was stored after encrypted in the same RAR archive and both files had been unpacked in the same extraction command, WinRAR 6.20 failed to unpack the unencrypted file; b) in some cases a wrong detailed reason of file open error could be displayed in the second line of open error message. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-621b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted February 14, 2023 Share Posted February 14, 2023 6.21 beta 1 ატრაკებს ჩემთან, ლოლ ზოგიერთ არქივებს არ მიხსნიდა, ჯერ მეგონა დესკტოპზე აირია რაღაცა, იცის ხოლმე ხანდახან, მერე შევუცვალე ოპერაში გადმოწერის ფოლდერი, მაგრამ ამოარქივების დროს ისევ ვერ იპოვაო ფაილი დამიწერა, მერე ავდექი და 6.2 დავაყენე ვინრარი და ეგრევე გასწორდა, ვისაც რამე მსგავსი ექნება დროებით გადმოვიდეს ფინალურზე, როგორც ჩანს მანდ რაღაცა შეიძლება დაფიქსეს მაგრამ სხვა რაღაცამ გაუბერა, დაჟე პოვერ რანით ვერ ხსნიდა ზოგიერთ არქივს, მაგრამ 6.2 ეგრევე გამოხსნა ყველაფერი, ნუ ublock გადმოვწერე და მანდ შევნიშნე, ჯერ დესკტოპის პრობლემა მეგონა მაგრამ ეგ რომ გავასწორე მაინც არ უშველა, ეტყობა ვინრარშია რაღაცა არეული და უფლებების პრობლემა მგონია უფრო, 6.2 გასწორდა ეგრევე, დავუცდი ახალ ბეტას და შეიძლება იქ დაფიქსონ ეგ პრობლემა, აი ეხლა დავაყენე 6.21 ბეტა და ისევ გაუბერა, ისე პირველათ ბეტებზე რომ დავაფიქსირე ეგეთი ბაგი ვინრარში ,აქამდე არ ქონია გაბერვები, ხო ყველა არქივზე არა აქვს ეგ პრობლემა მარტო ზოგიერთებზე, 6.2 უკვე ყველაფერს ხსნის Quote Link to comment Share on other sites More sharing options...
George Posted February 21, 2023 Share Posted February 21, 2023 WinRAR 6.21 ფინალური ვერსია გამოვიდა შეიმდეგი ჩეინჯლოგით: Version 6.21 1. Both file and folder modification timestamps are restored when unpacking TAR and TAR based archives like tar.gz and tar.bz2. Previously only file modification timestamps were set for these archive formats. 2. Added decompression of .tar.zst archives with dictionary exceeding 128 MB. WinRAR 6.20 allowed such dictionary for .zst, but not for .tar.zst. 3. Switches -ed and -e+d are also supported by ZIP archives. Previously they worked only for RAR archives. 4. Bugs fixed: a) if unencrypted file was stored after encrypted in the same RAR archive and both files had been unpacked in the same extraction command, WinRAR 6.20 failed to unpack the unencrypted file; b) in some cases a wrong detailed reason of file open error could be displayed in the second line of open error message. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-621.exe Quote Link to comment Share on other sites More sharing options...
George Posted May 19, 2023 Share Posted May 19, 2023 WinRAR 6.22 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.22 beta 1 1. Bugs fixed: a) extracting individual files from solid archives created by RAR versions older than 2.0, could fail in WinRAR 6.20 and 6.21. It didn't affect extracting the entire archive, which was performed correctly; b) files in Unix ARJ archives could be erroneously displayed as folders in WinRAR file list; c) "Display files in Explorer" extraction option was ignored if "When done: Close WinRAR" option was also set and archive was opened in WinRAR before extracting; d) file size value in the internal viewer status bar didn't include the byte order mask field, displaying a smaller than actual size for Unicode files. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-622b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted June 5, 2023 Share Posted June 5, 2023 ერთი კვირის უკან WinRAR 6.22 ფინალური ბილდი დაიდო შემდეგი ჩეინჯლოგით: Version 6.22 1. Bugs fixed: a) extracting individual files from solid archives created by RAR versions older than 2.0, could fail in WinRAR 6.20 and 6.21. It didn't affect extracting the entire archive, which was performed correctly; b) files in Unix ARJ archives could be erroneously displayed as folders in WinRAR file list; c) "Display files in Explorer" extraction option was ignored if "When done: Close WinRAR" option was also set and archive was opened in WinRAR before extracting; d) file size value in the internal viewer status bar didn't include the byte order mask field, displaying a smaller than actual size for Unicode files. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-622.exe Quote Link to comment Share on other sites More sharing options...
George Posted July 21, 2023 Share Posted July 21, 2023 WinRAR 6.23 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.23 beta 1 1. Added extraction of XZ archives utilizing ARM64 filter. 2. Rar$LS* temporary files, created when extracting or testing multiple archives from Windows context menu, are now deleted immediately. Previously they were deleted only on next WinRAR runs and only if they were at least 1 hour old. 3. Bugs fixed: a) a security issue involving out of bounds write is fixed in RAR4 recovery volumes processing code. We are thankful to goodbyeselene working with Trend Micro Zero Day Initiative for letting us know about this bug; b) WinRAR could start a wrong file after a user double clicked an item in a specially crafted archive. We are thankful to Andrey Polovinkin from Group-IB Threat Intelligence unit for letting us know about this bug; c) if both NTFS and Unix time extra fields were available for a file in ZIP archive, extraction command ignored the second extra field even if it provided more time fields than first one; d) interface themes were applied to archive icons even if "Apply to archive icons" option in "Organize themes" dialog was turned off. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-623b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted August 2, 2023 Share Posted August 2, 2023 WinRAR 6.23 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: ესეც გა 1. Added extraction of XZ archives utilizing ARM64 filter. 2. Rar$LS* temporary files, created when extracting or testing multiple archives from Windows context menu, are now deleted immediately. Previously they were deleted only on next WinRAR runs and only if they were at least 1 hour old. 3. Bugs fixed: a) a security issue involving out of bounds write is fixed in RAR4 recovery volumes processing code. We are thankful to goodbyeselene working with Trend Micro Zero Day Initiative for letting us know about this bug; b) WinRAR could start a wrong file after a user double clicked an item in a specially crafted archive. We are thankful to Andrey Polovinkin from Group-IB Threat Intelligence unit for letting us know about this bug; c) if both NTFS and Unix time extra fields were available for a file in ZIP archive, extraction command ignored the second extra field even if it provided more time fields than first one; d) interface themes were applied to archive icons even if "Apply to archive icons" option in "Organize themes" dialog was turned off. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-623.exe Quote Link to comment Share on other sites More sharing options...
George Posted September 20, 2023 Share Posted September 20, 2023 WinRAR 6.24 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.24 beta 1 1. Bugs fixed: a) WinRAR and UnRAR.dll extraction command dereferenced a null pointer and crashed when processing a zero length archive name in the archive metadata stored with -am switch. We are thankful to Radoslaw Madej from Check Point software for reporting this issue; b) WinRAR and UnRAR.dll extraction command overwrote extracted file data with contents of ::$DATA NTFS alternate data stream, if such stream was present in the archive. In this case unpacked data size and checksum could mismatch file size and checksum displayed in WinRAR file list. It didn't affect file name and type, which were displayed properly. We are thankful to Ata Hakcil for reporting this issue. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-624b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted October 5, 2023 Share Posted October 5, 2023 WinRAR 6.24 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: Version 6.24 1. Bugs fixed: a) WinRAR and UnRAR.dll extraction command dereferenced a null pointer and crashed when processing a zero length archive name in the archive metadata stored with -am switch. We are thankful to Radoslaw Madej from Check Point software for reporting this issue; b) WinRAR and UnRAR.dll extraction command overwrote extracted file data with contents of ::$DATA NTFS alternate data stream, if such stream was present in the archive. In this case unpacked data size and checksum could mismatch file size and checksum displayed in WinRAR file list. It didn't affect file name and type, which were displayed properly. We are thankful to Ata Hakcil for reporting this issue. ესეც გადმოსაწერი ლინკი 64 ბიტიანი ინგლისური ვერსიის: https://www.rarlab.com/rar/winrar-x64-624.exe Quote Link to comment Share on other sites More sharing options...
George Posted October 25, 2023 Share Posted October 25, 2023 WinRAR 7.00 ბეტა1 ბილდი დაიდო შემდეგი ჩეინჯლოგით: Version 7.00 beta 1 1. Compression dictionary sizes larger than 1 GB are supported for RAR archive format. Depending on the amount of physically available memory, dictionary up to 64 GB can be selected. Not power of 2 dictionary sizes can be specified for dictionaries exceeding 4 GB. So we are not limited to 4, 8, 16, 32, 64 series and can use values like 5 GB or 22 GB. Archives with dictionaries exceeding 4 GB can be unpacked only by WinRAR 7.0 or newer. Increasing the dictionary size can improve the compression ratio for large files with distant repeated blocks, like virtual machine disk images. It also can be efficient for sets of large similar files in a solid archive, such as a collection of software ISO images differing by version or localization. 2. WinRAR issues a prompt allowing to cancel or continue if dictionary size in extracted RAR archive exceeds "Maximum dictionary size allowed to extract" parameter in "Settings/Compression". It is done to prevent the unexpected excessive memory allocation. In the command line mode by default WinRAR refuses to unpack archives with dictionary exceeding 4 GB. Use -md or -mdx to allow unpacking dictionaries up to and including the specified size. Unlike -md, -mdx is applied to extraction only and can be added to RAR environment variable, not affecting archiving commands. 3. "Define dictionary sizes" dialog in "Settings/Compression" can be used to customize dictionary sizes proposed in the drop down list associated with "Dictionary size" field in "Archive name and parameters" dialog. 4. Alternate search algorithm, optimized to locate longer and more distant repeated data blocks, can be used when creating RAR archives. It helps to improve the compression ratio and sometimes speed for redundant data like big text files. It increases memory usage and might reduce the compression speed for some types of data. It can be turned on or off with "Long range search" options in "Advanced compression parameters" dialog or with -mcl[+|-] switch. If "Auto" option is selected, WinRAR applies the long range search depending on the compression method, dictionary size and other parameters. This algorithm is required for dictionaries exceeding 4 GB and turning it off is ignored for such dictionaries. 5. Much slower and more exhaustive repeated data search and compression algorithm can be enabled with "Exhaustive search" option in "Advanced compression parameters" dialog or with -mcx switch. It might provide the additional compression gain for some types of redundant data, but at much lower compression speed. Long range search is needed to implement this mode efficiently, so the exhaustive search option activates it automatically. Both long range and exhaustive search option do not affect the compatibility of created archives. So if dictionary size is in 128 KB - 4 GB range, archives created with these search options can be unpacked by all WinRAR versions beginning from 5.0. 6. Maximum path length limit is increased from 2047 to 65535 characters. 7. Creating archives in RAR 4.x format isn't supported anymore. Options and switches specific for this format are removed. It doesn't affect RAR 4.x archives decompression, which is included into WinRAR. 8. "Propagate Mark of the Web" option in "Settings/Security" dialog controls assigning the archive Mark of the Web to extracted files. It is possible to prohibit propagating, allow it for several predefined file groups, for all files or for files matching user defined file masks. Mark of the Web is the security zone information added by Internet browsers to downloaded files. It can be used by various software for security purposes. It is supported only by GUI WinRAR. Console RAR doesn't propagate Mark of the Web regardless of this option. 9. "Attributes" column can be enabled in "Settings/File list/Columns". It displays file attribute abbreviations, such as 'A' for "Archive" and 'D' for directory. If file attribute isn't among those recognized by WinRAR, the numeric value of file attributes is also displayed. This value uses hexadecimal format for Windows attributes or octal format for Unix attributes. 10. "Benchmark" command allows to specify the exact number of threads and copy results to clipboard. Information about WinRAR and Windows versions, CPU and memory is added to benchmark window. 11. "Remove redundant folders from extraction path" option in "Settings/Paths" is now applicable also to extraction commands invoked from WinRAR user interface and to multiple archives unpacked to separate folders. It removes a destination path component, only if its name matches both the archive name and root archived folder name, provided that there are no other folders or files in archive root. For example, it will remove one of "Pictures" in the destination path if we unpack Pictures.rar containing the root "Pictures" folder to "Pictures\" destination. Previously it worked only for a single archive extracted from context menu and didn't check if archived folder name matches the last destination path component. 12. "Word wrap in comment" option in "Interface" options group in "Settings/General" toggles the word wrap mode in archive comment window. 13. Dictionary size data in archive information dialog is now available for .bz2, .lz, .tar.bz2, .tar.gz, .tar.lz, .tar.zst archives. 14. Switch -ol- prohibits archiving and extracting symbolic links. 15. Switches -sl[u] and -sm[u] recognize [k|K|m|M|g|G|t|T] size units for kilobytes, thousands of bytes, megabytes, millions of bytes, gigabytes, billions of bytes, terabytes, trillions of bytes. If unit character is 'b', 'B' or not present, bytes are assumed. Previously these switches accepted bytes only. 16. SFX TempMode command accepts the optional @set:user parameter allowing to modify temporary folder permissions, so only the current user can access it. It prohibits a local user to replace files in a temporary folder if SFX is started under another account. It also can be enabled with "Restrict folder access" option in "Advanced SFX options/Modes" dialog. Some installers might fail to start in a folder created with @set:user parameter. 17. File permissions and NTFS alternate streams are not saved for hard link entries. They are saved only for the source file these entries refer to. It allows to reduce the archive size, because such file properties are automatically propagated to hard links copies when extracting. 18. Keyboard shortcuts, such as Ctrl+A to select all files or Alt+E to unpack found archives, are now functional in "Search results" window also while search is still in progress. Previously they were available only after completing search. 19. Switch -v[unit] recognizes 't' and 'T' as terabytes and trillions of bytes for volume size units. 20. Warning is issued if leading '-' character is missing in a parameter specified in "Additional switches" field of WinRAR archiving and extraction dialogs. Also it is issued for parameters lacking '-' in RAR environment variable and rar.ini file. Previously such malformed parameters were ignored silently. 21. "Convert archives" command displays the smooth total operation progress. Previously the total progress was updated abruptly after converting an archive and was visible only when processing multiple archives. 22. Proper progress is displayed when compressing symbolic link targets. 23. "Integrate WinRAR into shell" option in WinRAR "Settings/Integration" is grayed out if "Global\Integration=0" is present in winrar.ini file. 24. Bugs fixed: a) "User defined archive extensions" field in "Settings/Integration" was not saved if winrar.ini was used to store settings and WinRAR was started under non-administrator user account. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-700b1.exe Quote Link to comment Share on other sites More sharing options...
George Posted November 23, 2023 Share Posted November 23, 2023 WinRAR 7.00 ბეტა 2 ბილდი დაიდო შემდეგი ჩეინჯლოგით: Version 7.00 beta 2 1. 64-bit WinRAR version uses 64-bit SFX modules by default. 64-bit SFX modules are needed to unpack archives with dictionaries exceeding 1 GB. 32-bit modules are renamed to Default32.SFX, Zip32.SFX, WinCon32.SFX. 2. Maximum allowed dictionary size for archiving and extraction can be specified in gigabytes in MaxDictA and MaxDictE variables in "HKEY_CURRENT_USER\Software\WinRAR\Policy" Registry key. If these variables are smaller than corresponding values defined in WinRAR interface, they override interface values. 3. "Benchmark" command: a) wider text area allows to fit longer system information strings; b) "Copy to clipboard" buttom copies both text and window screenshot. 4. Note to software developers: FCI_RAR5_COMPAT and UNPACK_MAX_DICT values have been added in UnRAR source code 7.0.3. If earlier version of UnRAR 7 source code was integrated into application, it is necessary to update it to support them. 5. Console RAR filters out character 27 from screen output. It is done for security reasons, because this character can be used to declare ANSI escape control sequences in some terminal applications. We are thankful to Siddharth Dushantha for bringing this issue to our attention. 6. "Remove" option is added to "Original archive name and time" list on "Options" page of "Info" dialog. Unlike "Do not save", it removes the archive information even if no other options in this dialog are modified. 7. It is possible to enable "Packed" column in WinRAR file list also outside of archives to see NTFS compressed file size. 8. Bugs fixed: a) invalid names could be displayed for files inside of LZH archives; b) archiving dialog opened from Windows 11 context menu could be unexpectedly closed soon after opening; c) asterisk character wasn't displayed after encrypted archived files in WinRAR file list; d) value displayed as the dictionary size in archive properties in Windows Explorer could be either by 1024 larger than actual dictionary size or missing completely; e) '+' character from "Generate archive name by mask" string was included into resulting archie name; f) environment variables were not expanded in command parameters inside of SFX archive script. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-700b2.exe Quote Link to comment Share on other sites More sharing options...
George Posted December 14, 2023 Share Posted December 14, 2023 WinRAR 7.00 ბეტა 3 ბილდი დაიდო შემდეგი ჩეინჯლოგით: Version 7.00 beta 3 1. Faster CRC32 checksum calculation improves extraction and archiving performance for archives utilizing this type of checksum. Speed improvement can be noticeable when extracting large files, especially files saved in "Store" mode without compression. 2. "What's new" and "Run WinRAR" buttons are added to window completing WinRAR installation. 3. "Archive comment:" string is displayed before the archive comment in the console RAR. 4. Bugs fixed: a) information about the total number of files and folders in WinRAR status bar always displayed 1 folder; b) "Checksum" column wasn't displayed until turning it off and then on in column settings. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-700b3.exe Quote Link to comment Share on other sites More sharing options...
George Posted January 25 Share Posted January 25 WinRAR 7.00 ბეტა 4 ბილდი დაიდო შემდეგი ჩეინჯლოგით: Version 7.00 beta 4 1. Bugs fixed: a) fixed a crash in "Exhaustive search" archiving mode; b) timestamps of files extracted from UDF .iso archives didn't include the time zone offset; c) command "WinRAR x arcname.rar \" placed extracted files to current folder instead of disk root. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-700b4.exe Quote Link to comment Share on other sites More sharing options...
George Posted March 14 Share Posted March 14 WinRAR 7.00 ფინალური ბილდი გამოვიდა თებერვლის ბოლოს შემდეგი ჩეინჯლოგით: Version 7.00 1. Compression dictionary sizes larger than 1 GB are supported for RAR archive format. Depending on the amount of physically available memory, dictionary up to 64 GB can be selected. Not power of 2 dictionary sizes can be specified for dictionaries exceeding 4 GB. So we are not limited to 4, 8, 16, 32, 64 series and can use values like 5 GB or 22 GB. Archives with dictionaries exceeding 4 GB can be unpacked only by WinRAR 7.0 or newer. 64-bit WinRAR version is needed to unpack archives with dictionaries exceeding 1 GB. Increasing the dictionary size can improve the compression ratio for large files with distant repeated blocks, like virtual machine disk images. It also can be efficient for sets of large similar files in a solid archive, such as a collection of software ISO images differing by version or localization. 2. WinRAR issues a prompt allowing to cancel or continue if dictionary size in extracted RAR archive exceeds "Maximum dictionary size allowed to extract" parameter in "Settings/Compression". It is done to prevent the unexpected excessive memory allocation. In the command line mode by default WinRAR refuses to unpack archives with dictionary exceeding 4 GB. Use -md or -mdx to allow unpacking dictionaries up to and including the specified size. Unlike -md, -mdx is applied to extraction only and can be added to RAR environment variable, not affecting archiving commands. 3. "Define dictionary sizes" dialog in "Settings/Compression" can be used to customize dictionary sizes proposed in the drop down list associated with "Dictionary size" field in "Archive name and parameters" dialog. 4. Alternate search algorithm, optimized to locate longer and more distant repeated data blocks, can be used when creating RAR archives. It helps to improve the compression ratio and sometimes speed for redundant data like big text files. It increases memory usage and might reduce the compression speed for some types of data. It can be turned on or off with "Long range search" options in "Advanced compression parameters" dialog or with -mcl[+|-] switch. If "Auto" option is selected, WinRAR applies the long range search depending on the compression method, dictionary size and other parameters. This algorithm is required for dictionaries exceeding 4 GB and turning it off is ignored for such dictionaries. 5. Much slower and more exhaustive repeated data search and compression algorithm can be enabled with "Exhaustive search" option in "Advanced compression parameters" dialog or with -mcx switch. It might provide the additional compression gain for some types of redundant data, but at much lower compression speed. Long range search is needed to implement this mode efficiently, so the exhaustive search option activates it automatically. Both long range and exhaustive search option do not affect the compatibility of created archives. So if dictionary size is in 128 KB - 4 GB range, archives created with these search options can be unpacked by all WinRAR versions beginning from 5.0. 6. Maximum path length limit is increased from 2047 to 65535 characters. 7. Creating archives in RAR 4.x format isn't supported anymore. Options and switches specific for this format are removed. It doesn't affect RAR 4.x archives decompression, which is included into WinRAR. 8. "Propagate Mark of the Web" option in "Settings/Security" dialog controls assigning the archive Mark of the Web to extracted files. It is possible to prohibit propagating, allow it for several predefined file groups, for all files or for files matching user defined file masks. Mark of the Web is the security zone information added by Internet browsers to downloaded files. It can be used by various software for security purposes. It is supported only by GUI WinRAR. Console RAR doesn't propagate Mark of the Web regardless of this option. 9. "Attributes" column can be enabled in "Settings/File list/Columns". It displays file attribute abbreviations, such as 'A' for "Archive" and 'D' for directory. If file attribute isn't among those recognized by WinRAR, the numeric value of file attributes is also displayed. This value uses hexadecimal format for Windows attributes or octal format for Unix attributes. 10. "Benchmark" command allows to specify the exact number of threads and copy results to clipboard. Information about WinRAR and Windows versions, CPU and memory is added to benchmark window. 11. "Remove redundant folders from extraction path" option in "Settings/Paths" is now applicable also to extraction commands invoked from WinRAR user interface and to multiple archives unpacked to separate folders. It removes a destination path component, only if its name matches both the archive name and root archived folder name, provided that there are no other folders or files in archive root. For example, it will remove one of "Pictures" in the destination path if we unpack Pictures.rar containing the root "Pictures" folder to "Pictures\" destination. Previously it worked only for a single archive extracted from context menu and didn't check if archived folder name matches the last destination path component. 12. "Word wrap in comment" option in "Interface" options group in "Settings/General" toggles the word wrap mode in archive comment window. 13. Dictionary size data in archive information dialog is now available for .bz2, .lz, .tar.bz2, .tar.gz, .tar.lz, .tar.zst archives. 14. Switch -ol- prohibits archiving and extracting symbolic links. 15. Switches -sl[u] and -sm[u] recognize [k|K|m|M|g|G|t|T] size units for kilobytes, thousands of bytes, megabytes, millions of bytes, gigabytes, billions of bytes, terabytes, trillions of bytes. If unit character is 'b', 'B' or not present, bytes are assumed. Previously these switches accepted bytes only. 16. SFX TempMode command accepts the optional @set:user parameter allowing to modify temporary folder permissions, so only the current user can access it. It prohibits a local user to replace files in a temporary folder if SFX is started under another account. It also can be enabled with "Restrict folder access" option in "Advanced SFX options/Modes" dialog. Some installers might fail to start in a folder created with @set:user parameter. 17. File permissions and NTFS alternate streams are not saved for hard link entries. They are saved only for the source file these entries refer to. It allows to reduce the archive size, because such file properties are automatically propagated to hard links copies when extracting. 18. Keyboard shortcuts, such as Ctrl+A to select all files or Alt+E to unpack found archives, are now functional in "Search results" window also while search is still in progress. Previously they were available only after completing search. 19. Switch -v[unit] recognizes 't' and 'T' as terabytes and trillions of bytes for volume size units. 20. Warning is issued if leading '-' character is missing in a parameter specified in "Additional switches" field of WinRAR archiving and extraction dialogs. Also it is issued for parameters lacking '-' in RAR environment variable and rar.ini file. Previously such malformed parameters were ignored silently. 21. "Convert archives" command displays the smooth total operation progress. Previously the total progress was updated abruptly after converting an archive and was visible only when processing multiple archives. 22. Proper progress is displayed when compressing symbolic link targets. 23. "Integrate WinRAR into shell" option in WinRAR "Settings/Integration" is grayed out if "Global\Integration=0" is present in winrar.ini file. 24. 64-bit WinRAR version uses 64-bit SFX modules by default. 64-bit SFX modules are needed to unpack archives with dictionaries exceeding 1 GB. 32-bit modules are renamed to Default32.SFX, Zip32.SFX, WinCon32.SFX. 25. Maximum allowed dictionary size for archiving and extraction can be specified in gigabytes in MaxDictA and MaxDictE variables in "HKEY_CURRENT_USER\Software\WinRAR\Policy" Registry key. If these variables are smaller than corresponding values defined in WinRAR interface, they override interface values. 26. Console RAR filters out character 27 from screen output. It is done for security reasons, because this character can be used to declare ANSI escape control sequences in some terminal applications. We are thankful to Siddharth Dushantha for bringing this issue to our attention. 27. Bugs fixed: a) it was possible to overwrite Mark of the Web, propagated from archive to extracted files, and modify its security zone information utilizing a specially crafted .rar archive. We are thankful to Orange Tsai and NiNi from DEVCORE Research Team working with Trend Micro Zero Day Initiative for letting us know about this security issue. Unlike WinRAR, unrar.dll library doesn't propagate the archive Mark of the Web and leaves it to a caller application to assign it to extracted files. So unrar.dll isn't affected by this issue; b) "User defined archive extensions" field in "Settings/Integration" was not saved if winrar.ini was used to store settings and WinRAR was started under non-administrator user account. ესეც გადმოსაწერი ლინკი: https://www.rarlab.com/rar/winrar-x64-700.exe Quote Link to comment Share on other sites More sharing options...
George Posted Saturday at 04:07 AM Share Posted Saturday at 04:07 AM WinRAR 7.01 beta 1 ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: Version 7.01 beta 1 1. Bugs fixed: a) updating an encrypted file in a solid RAR archive produced a corrupt archive if updated file was the first in archive, no password was specified when starting updating and file name encryption in the updated archive wasn't enabled; b) WinRAR 7.00 crashed after switching to "Flat folders view" mode from archive subfolder; c) switch -ep4 duplicated the specified path instead of excluding it when extracting; d) if archive created by Unix RAR version contained symlinks with path separator characters in target paths, these characters could be broken when modifying such archive with Windows RAR; e) invalid file name was displayed in file rename and file execute WinRAR error messages; f) SFX "Shortcut" command failed to recognize empty parameters defined like "Shortcut=D,"",folder", while correctly recognizing such parameters without quote marks like "Shortcut=D,,folder"; g) volume reconstruction didn't work in WinRAR.exe if "rc" command was specified with .rev file, such as "WinRAR rc arc.part1.rev". Unlike RAR, WinRAR required to use only .rar file name here. ესეც გადმოსაწერი ლინკი ინგლისური 64 ბიტიანი ვერსიის: https://www.rarlab.com/rar/winrar-x64-701b1.exe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.