nvidiam momcera
John Kowalski
To Me
Today at 7:53 PM,
Thank you very much for using our NVIDIA Quadro by PNY professional graphics boards, and for contacting PNY Quadro Support. I regret the issue you have reported with your Quadro graphics board.
Do you have the latest BIOS installed for your Gigabyte motherboard?
Please take the steps outlined below:
1) Power down the system
2) Remove the NVIDIA Quadro card from the PCIE x16 slot
3) Boot the system using integrated graphics
4) Enter CMOS settings. CMOS settings can usually be accessed during boot, typically by pressing one of F1, F2, F8, F12, or Delete (depends on the system firmware) Alternatively they can be accessed in Windows 8 as follows:
http://www.makeuseof.com/tag/how-to-access-the-bios-on-a-windows-8-computer/
5) Set Secure Boot to Disabled
6) If there is an option, set CSM (or Compatibility or Legacy Mode) to Enabled.
7) Save the new settings
8) Power down the system
9) Install the NVIDIA Quadro card
10) The system should now boot
If you need more help, please feel welcome to contact me, and I will work to assist you further. Thanks again.
Best Regards,
John Kowalski
PNY Tech Support
800-230-0130
Ext. 5353