vaxto Posted December 10, 2013 Posted December 10, 2013 http://s019.radikal.ru/i630/1312/ec/178c7231b201.png ამის გამო შეიძლება კომპი ჭედავდეს და გვიან ირთვებოდეს? მოდერ თუ რამე შემეშალა მაპატიე
kakha77777 Posted December 10, 2013 Posted December 10, 2013 http://s019.radikal.ru/i630/1312/ec/178c7231b201.png ამის გამო შეიძლება კომპი ჭედავდეს და გვიან ირთვებოდეს? მოდერ თუ რამე შემეშალა მაპატიე არა.
vaxto Posted December 10, 2013 Author Posted December 10, 2013 ეს სურათი გუგლში მოვძებნე,უბრალოდ ჩემთან data-19426 ჩართვისას მიწერს windows ვერ კითხულობსო თუ რაგაც მასეთს
სოსო Posted December 10, 2013 Posted December 10, 2013 interface CRC error count იდეაში საუბარი უნდა იყოს სატა ინტერფეისზე სატა კაბელი რა მდგომარეობაშია? იქნებ სხვა სცადო ან მაზერზე სხვა სატა პორტი ან ორივე ერთად
Albert Einstein Posted December 11, 2013 Posted December 11, 2013 არამგონია მაგის გამო ირთვებოდეს გვიან. პრობლემა სხვა რამე იქნება. სოსომ რაც გირჩია ეგ სცადე, თუმცა არამგონია გამოსწორდეს, რადგან მსგავსი შემთხვევა მეც მქონდა ჩემს მყარ დისკზე, რომელსაც დღემდე ვამუშავებ უპრობლემოდ და მხოლოდ ოპერაციული სისტემა მაქვს დაყენებული. პრობლემას რომელსაც ეგ პროგრამა განახებს, განმარტებულია როგორც მყარი დიკის და დედადაფის მაკავშირებელი კაბელის გაუმართავ მუშაობა. ასევე შესაძლებელია სატა პორტების პრობლემაც იყოს. სულ ახალი სატა კაბელები მაქვს Sata III 6Gb/s-იანი, რომელიც არ ვცადე და რომელ სატა პორტზე პროგრამა მაინც მანახებდა იგივეს. ვფიქრობ რომ თავად ეს პროგრამა ურევს ზოგჯერ სმარტის დიაგნოსტიკის დროს, რადგან თუ მსგავსი პრობლემა არის რატომ ანახებს სმარტის სტატუსზე დადებით ესე რომ ვთქვათ დასკვნას თუ შედეგს. აჯობებს ყოველთვის იმ მწარმოებლის პროგრამა გამოიყენო, რომელიც თავად აქცთ მყარი დისკის დისგნოსტიკისათვის. WD Black გაქვს როგორც ვნახე და შესაბამისად ამ ბმულზე ნახავ საჭირო პროგრამას: Data Lifeguard Diagnostic for DOS Data Lifeguard Diagnostic for Windows გირჩევდი DOS-ისთვის განკუთვნილი ვერსია გადმოწერო, რადგან ბოლო ვერსიაა და საკმაოდ ახალი Windows-ის ვერსიასთან შედარებით. ერთადერთი რაც შეიძლება ამ შემთხვევაში პრობლემური გახდეს, სწორედ ამ DOS ვერსიისთვის განკუთვნილი პროგრამის გამოყენებაა, რადგან უნდა ჩაიწეროს DOS-ისთვის დაფორმატებულ ჩამტვირთავ Floppy-ზე. Floppy კი დღეს ფაქტიურად არ არის გამოყენებაში, მაგრამ თუ გაქვს ამის შესაძლებლობა სცადე. თავად დამჭირდა მე რამოდენიმე დღის წინ და სწორედ ამ მეთოდს მივმართე. CD-ისთვის ეს ახალი ვერსია არ არის სამწუხაროდ, ამაოდ არ ეძებო.P.S. Data Lifeguard Diagnostic for DOS Description Data LifeGuard Diagnostics is designed to test the physical condition of your hard drive. This utility is designed for drivers larger than 8.4 GB with model numbers starting with WDxxx. This program is designed to work only in a DOS booted environment. Supported Operating Systems DOS Instructions Download the dlgdiag_5_21.zip. Extract the dlgdiag5.exe file and copy to a DOS bootable diskette. Boot from this diskette. Make sure that your boot order in your Bios is set to boot from the floppy drive first. At DOS prompt type dlgdiag5.exe to run the program. You will see the following options: SELECT DRIVE - Always choose this option first, as it determines which drive you will be working on. QUICK TEST - This option tests your drive quickly for any major physical problems. (Please note: Although this option is safe and does not alter the data on your hard drive, Western Digital recommends that you have a current backup of your data). EXTENDED TEST - This option checks your drive thoroughly and it can repair any correctable errors. (Please note: Although this option is safe and does not alter the data on your hard drive, some data loss may occur, depending on the errors found and the errors corrected. Western Digital recommends that you have a current backup of your data). WRITE ZEROS TO DRIVE - The Write Zeros option, wipes all data off your drive. This option used when your data is no longer usable or recoverable. If you no longer need any data from your drive and would like to start over, run this option to set your drive to an as new condition. NOTE: Please make sure that you have selected the correct drive to perform this function on as once ran, no data will be recoverable. VIEW TEST RESULTS - You can see the results of the test you just performed PRINT TEST RESULTS - Test results can be printed with this option. USB printers are not supported LOG FILE OPEN/CLOSE - You can access the log file which is generated automatically ENTER AND PRINT RMA INFORMATION - Information pertaining to each drive tested can be customized and printed with this option. HELP - Brief descriptions of each option in addition to explanations of error codes are available in this option. QUIT - Reboot your system once you have completed the selected tasks Select the task you wish to perform.
vaxto Posted December 11, 2013 Author Posted December 11, 2013 სხვა კაბელიც ვცადე და სხვა სატა პორტშიც შევაერთე მაგრამ აზრი არ აქვს...კიდევ რისი ბრალი შეიძლება იყოს.. ვიდეო კარტა საერთოდ არ მიყენია, ოპერატიულსაც ადგილი შევუცვალე,,კვების ბლოკის ბრალი იქნება ვითომ? hdd რომ შევცვალო ხომ შეიძლება იგივე ქნას
daviti-q Posted December 11, 2013 Posted December 11, 2013 რატომ უნდა შეცვალო? რეგენერატორი გაჩვენებს რომ არ აქვს დარხეული ვინტს, ისე ჰარდ დისკ სენტინელით გატესტე მაინც.
Recommended Posts