Jump to content

Recommended Posts

ეს ვინრარის ვერსიები დაკრეკილია თუ დაუკრეკავი ?

Link to comment
Share on other sites

დაუკრეკავი რა თქმა უნდა, კრეკი ცალკე უნდა იპოვო, თუმცა ერთხელ ააქტიურებ და მაგის შემდეგ ანახლებ უკვე, აქტივაცია აღარ გაუქმნდება

Link to comment
Share on other sites

  • 1 month later...

WinRAR 5.40 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით:

Bugs fixed:
   
      a) RAR exited with code 6 (file open error) instead of expected
         code 10 (no files found) if file name specified for archiving
         did not exist;

      b) WinRAR could issue an excessive sound notification in the middle
         of archiving if sound was enabled in WinRAR settings
         and "Put each file to separate archive" option turned on;

      c) WinRAR did not delete a temporary file if ZIP archive modification
         was aborted, because ZIP archive had the read-only attribute;

      d) WinRAR crashed if "Print file" command was applied to a file
         or folder without extension.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/

Link to comment
Share on other sites

  • 2 weeks later...

WinRAR 5.40 beta 4 გამოვიდა შემდეგი ჩეინჯლოგით:

 1. Bugs fixed:
   
      a) if ZIP archive contained an archive comment shorter than
         24 characters, the comment page was not displayed in archive
         properties in Windows Explorer;

       'WinRAR x *.rar' command crashed if complete .part1.rar, 
         .part2.rar, ..., .partN.rar volume set was found when expanding
         *.rar mask.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-54b4.exe ლინკზე 64 ბიტიანი ინგლისური ვერსიაა, ბევრი ალბათ მაგას აყენებს ხოლმე მაინც

  • Upvote 1
Link to comment
Share on other sites

  • 4 weeks later...

WinRAR 5.40 ფინალური ვერსია გამოვიდა შემდეგი ჩეინჯლოგით:

 Version 5.40

   1. "Name encoding" submenu in "Options" menu allows to select
      encoding for archived file names. This selection affects archive
      browsing and extraction commands. You can use Ctrl+E keyboard
      shortcut to access this menu quickly.

      It can be useful when unpacking an archive without Unicode file names.
      For example, unpacking a zip file with Chinese archived names
      in Windows with Russian specified as a language for non-Unicode
      programs.

   2. If RAR recovery volumes (.rev files) are present in the same folder
      as usual RAR volumes, archive test command verifies .rev contents
      after completing testing .rar files.

      If you wish to test only .rev files without checking .rar volumes,
      you can select .rev files in WinRAR file list and apply "Test"
      only to them or run:

      rar t arcname.part1.rev

      in the command line.

   3. While NTFS file system permits file names with trailing spaces
      and dots, a lot of Windows programs fail to process such names
      correctly. If "Allow potentially incompatible names" option
      in "Advanced" page of extraction dialog is turned off, WinRAR removes
      trailing spaces and dots, if any, from file names when extracting.

      This option is turned off by default.

      Command line RAR also removes trailing spaces and dots when extracting
      unless -oni switch is specified.
   
   4. Previously "Synchronize archive contents" update mode
      (-as command line switch) aborted if some of archiving folders
      could not be read. Now WinRAR continues performing the operation
      and preserves archived files matching unreadable folders.

   5. WinRAR Shift+Del delete command can be used to delete folders
      containing non-standard file names with trailing spaces and dots.
      Usual delete to Recycle Bin also as Shift+Del in previous WinRAR
      versions cannot delete such folders.

      Unlike Del command, Shift+Del removes files permanently,
      they are not moved to Recycle Bin. No additional prompts are issued
      for files with read-only and system attributes.

   6. You can drag folders from folder tree panel and drop them to
      other programs or Desktop to copy or unpack them. Drag the archive
      icon in tree panel root to unpack the entire archive.
   
   7. "New folder" button in extraction dialog proposes a new folder name
      based on archive name instead of generic "New Folder".

   8. Command line RAR version information:
   
      a) if -iver switch is specified, RAR displays the version number
         and quits. You can run just "RAR -iver";

       "x86" or "x64" is displayed in Windows RAR version information
         both for -iver and in the copyright title for other commands.
   
   9. If -p switch is used without optional <pwd> parameter,
      a password can be also set with file redirection or pipe.

      For example: rar -p myarc.rar myfiles < psw.txt

  10. Command line RAR treats 'arcname.partN' as 'arcname.partN.rar'
      if 'arcname.partN' does not exist and 'arcname.part#.rar' exists.

      For example, it is allowed to run:

      RAR x arcname.part01

      to start extraction from arcname.part01.rar
   
  11. Improvements in 7z archives support:
   
      a) "Solid" status is correctly detected and reported for 7z archives
         in WinRAR "Info" command;

       dictionary size is displayed for LZMA and LZMA2 7z archives
         in WinRAR "Info" command;

      c) unknown packed size for files inside of 7z solid block is denoted
         as '?' instead of '0' when browsing the archive contents in WinRAR.
   
  12. Maximum comment length for RAR archives is increased from 64 to 256 KB.

      Since SFX script commands are stored in archive comment,
      it allows a longer main and license text in SFX archives.

  13. Size of default WinRAR viewer font is scaled up properly
      in Windows high DPI mode.

  14. Switch -scul can be used to process big endian UTF-16 list files
      as well, provided that they have a correct byte order mark.
      Previously it allowed only little endian file lists.

  15. Minimum supported Windows version is Windows XP SP3 now.
      WinRAR will not run in Windows XP without service packs.

  16. "Settings/File list/Allow all uppercase names" option is removed.
      This option was intended to simplify transition from MS DOS to
      Windows and is not needed anymore.

  17. Bugs fixed:
   
      a) WinRAR 5.31 x64 "Compress and email" command did not work
         with Microsoft Outlook x64;

       if WinRAR 5.31 version for one of right to left languages
         was installed in Windows with English or other not right to
         left system language, WinRAR could change Windows Explorer
         layout to right to left;

      c) if archive was stored in a folder without "Write" permission
         and if archive contents was extracted with drag and drop to
         a writable folder, WinRAR issued an unnecessary privileges
         elevation prompt.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-540.exe

Link to comment
Share on other sites

  • 8 months later...

WinRAR 5.50 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით:

 Version 5.50 beta 1

   1. WinRAR and command line RAR use RAR 5.0 archive format by default.
      You can change it to RAR 4.x compatible format with "RAR4" option
      in archiving dialog or -ma4 command line switch.
      
      If you prefer RAR 4.x format by default, use "Create default..."
      button on "Compression" page of WinRAR settings and set "RAR4"
      in the displayed dialog.

      This change affects only new clean installs. If you already saved
      RAR format in the default compression profile in previous versions,
      WinRAR respects stored settings.
   
   2. Use "Set master password" button in "Organize passwords" dialog
      to encrypt saved password records and protect them from unauthorized
      access. 
      
      If saved passwords are protected with master password, you need to
      enter the master password and press "OK" in password prompt to access
      them. If entered password does not match the master password,
      it is treated as a usual password for archive operations.

      Once entered, the master password is valid until WinRAR is closed.
      Close WinRAR and open it again after specifying the master password
      if you wish to see how protection works. Enter a valid and then
      empty master password to remove encryption from previously protected
      password records.

      This WinRAR version uses a new data format for password organizer,
      so passwords stored in "Organize passwords" dialog are not readable
      by older versions. It does not affect archive encryption formats
      and encrypted archives are compatible with previous WinRAR version.
      Organizer data is converted to a new format only when you save it
      and not immediately after installing WinRAR.

   3. Prompt proposing to set the master password is displayed
      when storing a password in compression profile. You can enter
      the master password to encrypt password data stored in Registry
      and protect it from unauthorized access. You will need to enter
      the master password in password prompt dialog to access
      such compression profile after that.

      Once entered, the master password is valid until WinRAR is closed.
      Close WinRAR and open it again after specifying the master password
      if you wish to see how protection works.

   4. By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives.
      While AES-256 is significantly more secure than ZIP 2.0 legacy
      encryption algorithm, it can be incompatible with some older
      unzip software. If compatibility with such tools is required,
      you can enable "ZIP legacy encryption" option in the password
      dialog or use -mezl switch in the command line mode. 
   
   5. Added extraction support for .LZ archives created by Lzip compressor.
   
   6. Modern TAR tools can store high precision file times, lengthy
      file names and large file sizes in special PAX extended headers
      inside of TAR archive. Now WinRAR supports such PAX headers
      and uses them when extracting TAR archives.

   7. New "Store modification time" option on "Time" page of archiving
      dialog can be used to prohibit storing the file modification time
      in RAR 5.x archives. Former "High precision modification time"
      option is replaced by "High precision time format".

   8. New "Full paths in title bar" option in "Settings/General" dialog.
      If enabled, the full path of currently opened folder or archive
      is displayed in WinRAR title bar.

   9. New "Settings/Archives" page provides "File types to open as
      archives first" group of options. Here you can define how Enter
      or double click on a file with non-archive extension and archive
      contents should be processed in WinRAR file list. Examples
      of such files are .docx or self-extracting .exe archives.
      You can instruct WinRAR to open such files as archives,
      to run them, to handle them similarly or differently inside
      and outside of archives, to never run specified file types
      even if they do not include any archived contents.

      Default settings are to open self-extracting exe and to run
      other types of archives with non-archive extension.

      Regardless of these options, you can always open any such 
      archive file by pressing Ctrl+PgDn on its name in WinRAR file list.

  10. New "Copy full names to clipboard" command in "File" menu
      places full names of selected files to clipboard.

      This command is also added to context menu displayed
      when right clicking the file list in WinRAR. Several other commands,
      which are also present on the toolbar or in main menu,
      such as "View" and "Repair", are removed from this context menu.

  11. LZ and ZIPX are added to list of associations in Settings/Integration
      dialog.

  12. LZ and ZIPX extensions are added to default list of formats for
      -ms switch ("Specify file types to store") invoked without parameters.

  13. You can specify 'f' charset value in -sc switch to use UTF-8
      encoding. For example:

      rar a -scfl arcname @filelist.txt

      to read contents of filelist.txt as UTF-8 text.

  14. RAR "lt" and "vt" commands display file times with nanosecond
      precision. Such precision is used in RAR5 archives created
      by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns
      file time precision.

  15. Only '+', '-' and '1' precision modifiers are supported
      in -ts switch now. Use '+' to store the file time with maximum
      precision, '-' to omit the file time and '1' to store it with
      1 second precision. Intermediate precision modes previously
      defined with '2' and '3' modifiers are not available in RAR 5.0
      archive format and ignored by -ts switch.

  16. If a wrong password is entered when unpacking an encrypted file
      in RAR5 archive, WinRAR proposes to enter a valid password
      for same file again instead of aborting extraction.
   
  17. File path information is displayed if mouse pointer is placed over
      a name of archiving file in the operation progress window.

  18. Name of currently active compression profile is displayed
      in the archiving dialog above "Profiles..." button.

  19. If "Find" command is invoked from inside of archive subfolder,
      "File names to find" will include the path to this subfolder.
      So "Find" will search only starting from this subfolder.

  20. Bugs fixed:
   
      a) WinRAR failed to unpack files in ZIP archives compressed
         with XZ algorithm and encrypted with AES;
      
       if "Windows progress bars" option in WinRAR settings was turned off
         and "Put each file to separate archive" archiving mode was used,
         "gold" part of total progress bar did not display the compressed
         data ratio correctly;

      c) SFX archive extraction progress was incorrect in case of
         multivolume SFX archive with total volume size exceeding 4 GB;

      d) if archived folder name included trailing spaces, if user
         selected and extracted some folders in non-root archive folder
         and if "Allow potentially incompatible names" extraction option
         was turned off, WinRAR could lose one or more leading characters
         in extracted folder name;

      e) if only creation or only last access file time was stored in RAR5
         archive with 1 second precision, such as with -ma5 -tsm- -tsa1
         switches, this stored time was ignored when extracting.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b1.exe

Link to comment
Share on other sites

  • 2 weeks later...

WinRAR 5.50 beta 2 გამოვიდა შემდეგი ჩეინჯლოგით:


   Version 5.50 beta 2

   1. Previous versions ignored files with invalid UTF-8 names
      inside of ZIP archives. Now WinRAR extracts such files,
      even though their names may include arbitrary text after unpacking.

   2. Bugs fixed:
   
      a) 5.50 beta 1 could crash when extracting some of broken
         RAR4 archives;
      
       "Settings/Viewer/Unpack everything for" was ignored for files
         matching "Settings/Archives/File types to open as archives first"
         masks. Now it is changed, so "Unpack everything for" has a higher
         precedence for archived files. Files inside of archive matching
         "Unpack everything for" masks are processed according to that
         option even if they are also matched by "File types to open
         as archives first" masks.

ესეც გადმოსაწერი ლინკი ინლგისური 64 ბიტინი ვერსიის: http://rarlab.com/rar/winrar-x64-55b2.exe

 

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.50 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით:


   Version 5.50 beta 3

   1. Added support for Unix extended timestamp extra field
      (0x5455 extra field tag) in ZIP archives. Such timestamps are used
      by InfoZip to store UTC file time additionally to standard
      ZIP local time. Now WinRAR reads and sets such timestamps
      when extracting.

   2. "Run", "Open in associated application", "Show archive contents"
      items are added to right click menu in WinRAR file list.
      So you can right click SFX archive or archive file with non-archive
      extension like .docx and choose if you wish to browse its contents,
      to run or open it.

      These items are present only in the file management mode
      and are not available inside of archives.
   
   3. "File types to open as archives first" option is moved from
      "Settings/Archives" to "Settings/Compression". Now it works only
      outside of archives to avoid conflicts with "Settings/Viewer/
      Unpack everything for" option.

      Default folders for archives and extracted files are moved
      from "Settings/Compression" to "Settings/Paths" dialog page.

   4. Bugs fixed:
   
      a) some files in TAR archives could be unpacked with full paths
         even if "Extract relative paths" option was enabled.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b3.exe

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.50 beta 4 გამოვიდა შემდეგი ჩეინჯლოგით:


   1. Bugs fixed:
   
      a) fixed a crash and security vulnerability when unpacking corrupt
         RAR4 archives;
      
       "Extract to a specified folder" command was missing
         in context menu in WinRAR file list when right clicking an archive.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b4.exe

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.50 beta 5 გამოვიდა შემდეგი ჩეინჯლოგით:

 1. If it takes too much time to locate a destination path
      in extraction dialog folder tree, automatic search performed
      as user enters the path is cancelled. Lengthy search 
      in large folders could interfere with user input in this dialog.

      You can still force WinRAR to select the entered destination path
      in extraction dialog with "Display" button.
   
   2. Bugs fixed:
   
      a) the keyboard focus was not returned to "Settings/File list"
         dialog page after selecting the file list font.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b5.exe

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.50 beta 6 გამოვიდა შემდეგი ჩეინჯლოგით:


   1. File association option for JAR files is off by default
      in WinRAR installer unless you enabled it earlier in previous
      WinRAR versions. You need to enable this option manually
      if you wish to associate WinRAR with *.jar.

   2. Unless "Allow absolute paths in symbolic links" extraction dialog
      option or -ola command line switch are specified, WinRAR does not
      allow to extract symbolic links with ".." in target if any of
      link path components is an existing symbolic link itself.
      It is done to prevent bypassing WinRAR security checks with
      chains from several symbolic links.
   
   3. Bugs fixed:

      a) if "Add" command was used from inside of archive opened
         in WinRAR interface, "file not found" error could be issued
         for files which pathnames included spaces;
      
       fixed crashes when unpacking corrupt RAR archives;

      c) "rar a arc. filename" command created "arc." archive
         with trailing dot instead of expected "arc" without any extension;

      d) "New folder" button in extraction dialog selected a parent of
         newly created folder instead of such folder itself;

      e) "Checksum error" could be mistakenly reported for some valid
         GZIP archives.

ესეც გადმოსაწერი ლინკი: http://rarlab.com/rar/winrar-x64-55b6.exe

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.50 ფინალური ვერსია გამოვიდა შემდეგი ჩეინჯლოგით:

1. WinRAR and command line RAR use RAR 5.0 archive format by default.
      You can change it to RAR 4.x compatible format with "RAR4" option
      in archiving dialog or -ma4 command line switch.
      
      If you prefer RAR 4.x format by default, use "Create default..."
      button on "Compression" page of WinRAR settings and set "RAR4"
      in the displayed dialog.

      This change affects only new clean installs. If you already saved
      RAR format in the default compression profile in previous versions,
      WinRAR respects stored settings.
   
   2. Use "Set master password" button in "Organize passwords" dialog
      to encrypt saved password records and protect them from unauthorized
      access. 
      
      If saved passwords are protected with master password, you need to
      enter the master password and press "OK" in password prompt to access
      them. If entered password does not match the master password,
      it is treated as a usual password for archive operations.

      Once entered, the master password is valid until WinRAR is closed.
      Close WinRAR and open it again after specifying the master password
      if you wish to see how protection works. Enter a valid and then
      empty master password to remove encryption from previously protected
      password records.

      This WinRAR version uses a new data format for password organizer,
      so passwords stored in "Organize passwords" dialog are not readable
      by older versions. It does not affect archive encryption formats
      and encrypted archives are compatible with previous WinRAR version.
      Organizer data is converted to a new format only when you save it
      and not immediately after installing WinRAR.

   3. Prompt proposing to set the master password is displayed
      when storing a password in compression profile. You can enter
      the master password to encrypt password data stored in Registry
      and protect it from unauthorized access. You will need to enter
      the master password in password prompt dialog to access
      such compression profile after that.

      Once entered, the master password is valid until WinRAR is closed.
      Close WinRAR and open it again after specifying the master password
      if you wish to see how protection works.

   4. By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives.
      While AES-256 is significantly more secure than ZIP 2.0 legacy
      encryption algorithm, it can be incompatible with some older
      unzip software. If compatibility with such tools is required,
      you can enable "ZIP legacy encryption" option in the password
      dialog or use -mezl switch in the command line mode. 
   
   5. Added extraction support for .LZ archives created by Lzip compressor.
   
   6. Modern TAR tools can store high precision file times, lengthy
      file names and large file sizes in special PAX extended headers
      inside of TAR archive. Now WinRAR supports such PAX headers
      and uses them when extracting TAR archives.

   7. New "Store modification time" option on "Time" page of archiving
      dialog can be used to prohibit storing the file modification time
      in RAR 5.x archives. Former "High precision modification time"
      option is replaced by "High precision time format".

   8. New "Full paths in title bar" option in "Settings/General" dialog.
      If enabled, the full path of currently opened folder or archive
      is displayed in WinRAR title bar.

   9. New "File types to open as archives first" option
      in "Settings/Compression". Here you can define how Enter
      or double click on a file with non-archive extension and archive
      contents should be processed in WinRAR file list in file
      management mode. Examples of such files are .docx or self-extracting
      .exe archives. You can instruct WinRAR either to open such files
      as archives first or to execute or open them in associated programs.

      Default settings are to open self-extracting exe and to run
      other types of archives with non-archive extension.

      Regardless of these options, you can always open any such 
      archive file by pressing Ctrl+PgDn on its name in WinRAR file list.

      Default folders for archives and extracted files are moved
      from "Settings/Compression" to "Settings/Paths".

  10. New "Copy full names to clipboard" command in "File" menu
      places full names of selected files to clipboard.      

  11. Changes in the context menu displayed when right clicking
      the file list in WinRAR:

      a) several commands, which are also present on the toolbar
         or in main menu, such as "View" and "Repair", are removed
         from this context menu;

       "Copy full names to clipboard" command is added;

      c) "Run" for executables, "Open in associated application"
         for associated files and "Show archive contents" for archives
         are added. They allow to choose a way to process SFX archives
         and archive files with non-archive extensions.

         These items are present only in the file management mode
         and are not available inside of archives.

  12. LZ and ZIPX are added to list of associations in Settings/Integration
      dialog.

  13. LZ and ZIPX extensions are added to default list of formats for
      -ms switch ("Specify file types to store") invoked without parameters.

  14. You can specify 'f' charset value in -sc switch to use UTF-8
      encoding. For example:

      rar a -scfl arcname @filelist.txt

      to read contents of filelist.txt as UTF-8 text.

  15. RAR "lt" and "vt" commands display file times with nanosecond
      precision. Such precision is used in RAR5 archives created
      by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns
      file time precision.

  16. Only '+', '-' and '1' precision modifiers are supported
      in -ts switch now. Use '+' to store the file time with maximum
      precision, '-' to omit the file time and '1' to store it with
      1 second precision. Intermediate precision modes previously
      defined with '2' and '3' modifiers are not available in RAR 5.0
      archive format and ignored by -ts switch.

  17. If a wrong password is entered when unpacking an encrypted file
      in RAR5 archive, WinRAR proposes to enter a valid password
      for same file again instead of aborting extraction.
   
  18. File path information is displayed if mouse pointer is placed over
      a name of archiving file in the operation progress window.

  19. Name of currently active compression profile is displayed
      in the archiving dialog above "Profiles..." button.

  20. If "Find" command is invoked from inside of archive subfolder,
      "File names to find" will include the path to this subfolder.
      So "Find" will search only starting from this subfolder.

  21. Bugs fixed:
   
      a) fixed crashes and security vulnerability when unpacking corrupt
         RAR archives;

       WinRAR failed to unpack files in ZIP archives compressed
         with XZ algorithm and encrypted with AES;
      
      c) if "Windows progress bars" option in WinRAR settings was turned off
         and "Put each file to separate archive" archiving mode was used,
         "gold" part of total progress bar did not display the compressed
         data ratio correctly;

      d) SFX archive extraction progress was incorrect in case of
         multivolume SFX archive with total volume size exceeding 4 GB;

      e) if archived folder name included trailing spaces, if user
         selected and extracted some folders in non-root archive folder
         and if "Allow potentially incompatible names" extraction option
         was turned off, WinRAR could lose one or more leading characters
         in extracted folder name;

      f) if only creation or only last access file time was stored in RAR5
         archive with 1 second precision, such as with -ma5 -tsm- -tsa1
         switches, this stored time was ignored when extracting.

ესეც გადმოსაწერი ლინკი:  http://www.rarlab.com/rar/winrar-x64-550.exe 64 ბიტიანი ინგლისური ვერსიაა

 

Link to comment
Share on other sites

  • 7 months later...

WinRAR 5.60 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით:

Version 5.60 beta 1

   1. We updated WinRAR graphics.

      We are grateful to http://weirdsgn.com and http://icondesignlab.com
      designers participated in this endeavor and proud to announce that
      WinRAR uses the new icon set prepared by Aditya Nugraha Putra
      from http://weirdsgn.com.

      Previous WinRAR icons are available as interface theme here:
      https://rarlab.com/themes/WinRAR_Classic_48x36.theme.rar
   
   2. "Repair" command efficiency is improved for recovery record protected
      RAR5 archives. Now it can detect deletions and insertions of unlimited
      size also as shuffled data including data taken from several recovery
      record protected archives and merged into a single file in arbitrary
      order.
   
   3. "Turn PC off when done" archiving option is changed to "When done"
      drop down list, so you can turn off, hibernate or sleep your PC
      after completing archiving.

   4. Use -ioff or -ioff1 command line switch to turn PC off,
      -ioff2 to hibernate and -ioff3 to sleep your PC after completing
      an operation.

   5. If encoding of comment file specified in -z<file> switch is not
      defined with -sc switch, RAR attempts to detect UTF-8, UTF-16LE
      and UTF-16BE encodings based on the byte order mask and data
      validity tests.

   6. WinRAR attempts to detect ANSI, OEM and UTF-8 encodings of
      ZIP archive comments automatically.
   
   7. "Internal viewer/Use DOS encoding" option in "Settings/Viewer"
      is replaced with "Internal viewer/Autodetect encoding".
      If "Autodetect encoding" is enabled, the internal viewer attempts
      to detect ANSI (Windows), OEM (DOS), UTF-8 and UTF-16 encodings.

   8. Normally Windows Explorer context menu contains only extraction
      commands if single archive has been right clicked. You can override
      this by specifying one or more space separated masks in "Always display
      archiving items for" option in Settings/Integration/Context menu items",
      so archiving commands are always displayed for these file types
      even if file was recognized as archive. If you wish both archiving
      and extraction commands present for all archives, place "*" here.
   
   9. SFX module "SetupCode" command accepts an optional integer parameter
      allowing to control mapping of setup program and SFX own error codes.
      It is also accessible as "Exit code adjustment" option
      in "Advanced SFX options/Setup" dialog.
   
  10. New "Show more information" WinRAR command line -im switch.
      It can be used with "t" command to issue a message also in case of
      successful archive test result. Without this switch "t" command
      completes silently if no errors are found.

      This switch is applicable only to WinRAR.exe and ignored by console
      RAR.exe.

  11. If a wrong password is entered when unpacking an encrypted file
      in ZIP archive, WinRAR proposes to enter a valid password
      for same file again instead of aborting extraction.

  12. If a wrong password is entered when opening or unpacking RAR archive
      with encrypted file names, WinRAR proposes to enter a valid password
      again instead of aborting the operation. Previous versions already
      did so for RAR archives with encrypted file data, but aborted
      for archives with file name encryption.

  13. WinRAR recognizes GZIP files with arbitrary data preceding
      an actual GZIP archive, such as .scexe firmware files.

  14. @filelist parameter can be specified in "Files to add" field of
      archiving dialog. In this case WinRAR will attempt the list of archiving
      files from 'filelist' file, which should be the plain text, one file
      name per line.

  15. Info dialog:
      
      a) compression ratio graph is updated;

       "Names and data" is displayed in "Encryption" field for
         archives with encrypted file names.

  16. Full archive name is displayed if mouse pointer is placed over
      an archive name in the operation progress window. It can be useful
      if archive name is lengthy and does not fit to available window space.

  17. If -ts1 switch is used with -u or -f, file time comparison is performed
      with 1 second precision. Previosuly in such case we could wrongly treat
      an adding file as newer than archived just because we compared the high
      precision adding file time against the low precision archived file time.

  18. "Update" and "Fresh" commands ('u' and 'f' in the command line mode)
      quit immediately if no files are to be updated. Previously they created
      a temporary archive before quitting when updating archives with recovery
      record or quick open information.

  19. Prompt is issued after creating 500 volumes from WinRAR GUI shell,
      so user can continue or quit further archiving. It is done to prevent
      creating many thousands of volumes in case of wrongly entered
      volume size.

  20. WinRAR uses megabytes instead of bytes as default units for volume size
      field in the archiving dialog.

  21. "Repair" command issues "Recovery record is corrupt" message
      after repairing RAR5 archive containing a broken recovery record.
      Previously such message was issued only by "Test" command
      and "Repair" handled most of recovery record damages silently.

  22. Bugs fixed:

      a) fixed potential security issues when processing corrupt
         RAR archives;
      
       non-English characters in TAR files with PAX extended headers
         were not displayed correctly;

      c) "rar x arcname.rar .." command unpacked files to current folder
         instead of its parent;

      d) pasting files from Windows Explorer to archive opened in WinRAR
         blocked further copy and paste operations in Explorer until
         archiving was finished;

      e) SFX module issued "The specified password is incorrect" message
         infinitely not prompting for correct password once a wrong password
         was entered;

      f) folders time was always set when extracting ZIP archives even if
         "File time" options in the extraction dialog were turned off;

      g) if "Delete archive: Always" was selected when extracting
         and user pressed "Cancel" in the file overwrite or password prompt,
         an archive could be deleted even after cancelling extraction
         for .zip and .7z formats.

ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-550.exe მოკლეთ ვიდი შეუცვლიათ მაგ ახალში

Link to comment
Share on other sites

  • 4 weeks later...

WinRAR 5.60 beta 2 გამოვიდა შემდეგი ჩეინჯლოგით:

 Version 5.60 beta 2

   1. "Extra large buttons" option in "Settings/General" selects
      64x48 toolbar buttons.

   2. "Restart" option is added to "Advanced/When done" list
      in archiving dialog.

   3. -ioff4 switch can be used to restart PC after completing archiving
      or extraction.

   4. Since it may take a lot of time to display contents of large
      tar.bz2 and tar.gz files, WinRAR displays the percent complete
      in the status bar while opening such archives.
   
   5. Bugs fixed:

      a) previous beta did not restore the toolbar layout changed by user.
 

ესეც გადმოსაწერი ლინკი:  https://rarlab.com/rar/winrar-x64-56b2.exe

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.60 beta 3 გამოვიდა შემდეგი ჩეინჯლოგით:

Version 5.60 beta 3

   1. "Put each file to separate archive" option always appends
      the archive format extension to archiving file extension.
      So filename.ext is archived to filename.ext.rar
      instead of filename.rar.

   2. Thicker borders of tree panel and comment window to make their
      resizing easier.

ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-56b3.exe

Link to comment
Share on other sites

  • 4 weeks later...

WinRAR 5.60 beta 4 გამოვიდა შემდეგი ჩეინჯლოგით:

Version 5.60 beta 4

   1. WinRAR failed to unpack some ZIP archives compressed with
      PPMd algorithm.
   
   2. WinRAR entry in Windows Start menu uses Desktop as a start folder,
      so Desktop contents is shown after opening WinRAR. Previously it had
      the start folder blank, which resulted in displaying Windows system
      files on start.

   3. If wrong password was specified for ZIP archive, the previous beta
      issued an error message with "OK" button for every encrypted file
      even if password was specified with "Set default password" command
      or -p<pwd> switch. Now users do not need to press "OK" repeatedly
      for globally set wrong ZIP passwords.

ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-56b4.exe

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.60 beta 5 გამოვიდა შემდეგი ჩეინჯლოგით:

 Version 5.60 beta 5

   1. WinRAR failed to unpack ZIP archives created by RAR for Android
      and encrypted with non-English passwords. Fixed now.
      This fix should also work for archives created by other ZIP tools
      and utilizing UTF-8 for internal password encoding.
         
   2. Tree panel height was not adjusted after changing the toolbar button
      size until restarting WinRAR.

   3. If hard link is extracted without extracting the link target,
      WinRAR issues a warning and sets the error code after skipping
      the link extraction. Previously it was skipped silently.

ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-550.exe

Link to comment
Share on other sites

5.50 ვერსიასთან შედარებით ცოტა ნელია, მაგრამ სტაბილური დატვირთვით მუშაობს დიდ ფაილებთან
კაკრაზ გუშინ მქონდა რამოდენიმე GB დასაარქივებელი და თავი არ შეურცხვენია

2q2p9ok.png

Link to comment
Share on other sites

  • 3 weeks later...

WinRAR 5.60 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

 Version 5.60

   1. We updated WinRAR graphics.

      We are grateful to http://weirdsgn.com and http://icondesignlab.com
      designers participated in this endeavor and proud to announce that
      WinRAR uses the new icon set prepared by Aditya Nugraha Putra
      from http://weirdsgn.com.

      Previous WinRAR icons are available as interface theme here:
      https://rarlab.com/themes/WinRAR_Classic_48x36.theme.rar
   
   2. "Repair" command efficiency is improved for recovery record protected
      RAR5 archives. Now it can detect deletions and insertions of unlimited
      size also as shuffled data including data taken from several recovery
      record protected archives and merged into a single file in arbitrary
      order.
   
   3. "Turn PC off when done" archiving option is changed to "When done"
      drop down list, so you can turn off, hibernate or sleep your PC
      after completing archiving.

   4. Use -ioff or -ioff1 command line switch to turn PC off,
      -ioff2 to hibernate and -ioff3 to sleep your PC after completing
      an operation.

   5. If encoding of comment file specified in -z<file> switch is not
      defined with -sc switch, RAR attempts to detect UTF-8, UTF-16LE
      and UTF-16BE encodings based on the byte order mask and data
      validity tests.

   6. WinRAR attempts to detect ANSI, OEM and UTF-8 encodings of
      ZIP archive comments automatically.
   
   7. "Internal viewer/Use DOS encoding" option in "Settings/Viewer"
      is replaced with "Internal viewer/Autodetect encoding".
      If "Autodetect encoding" is enabled, the internal viewer attempts
      to detect ANSI (Windows), OEM (DOS), UTF-8 and UTF-16 encodings.

   8. Normally Windows Explorer context menu contains only extraction
      commands if single archive has been right clicked. You can override
      this by specifying one or more space separated masks in "Always display
      archiving items for" option in Settings/Integration/Context menu items",
      so archiving commands are always displayed for these file types
      even if file was recognized as archive. If you wish both archiving
      and extraction commands present for all archives, place "*" here.
   
   9. SFX module "SetupCode" command accepts an optional integer parameter
      allowing to control mapping of setup program and SFX own error codes.
      It is also accessible as "Exit code adjustment" option
      in "Advanced SFX options/Setup" dialog.
   
  10. New "Show more information" WinRAR command line -im switch.
      It can be used with "t" command to issue a message also in case of
      successful archive test result. Without this switch "t" command
      completes silently if no errors are found.

      This switch is applicable only to WinRAR.exe and ignored by console
      RAR.exe.

  11. If a wrong password is entered when unpacking an encrypted file
      in ZIP archive, WinRAR proposes to enter a valid password
      for same file again instead of aborting extraction.

  12. If a wrong password is entered when opening or unpacking RAR archive
      with encrypted file names, WinRAR proposes to enter a valid password
      again instead of aborting the operation. Previous versions already
      did so for RAR archives with encrypted file data, but aborted
      for archives with file name encryption.

  13. WinRAR recognizes GZIP files with arbitrary data preceding
      an actual GZIP archive, such as .scexe firmware files.

  14. @filelist parameter can be specified in "Files to add" field of
      archiving dialog. In this case WinRAR will attempt the list of archiving
      files from 'filelist' file, which should be the plain text, one file
      name per line.

  15. Info dialog:
      
      a) compression ratio graph is updated;

      b) "Names and data" is displayed in "Encryption" field for
         archives with encrypted file names.

  16. Full archive name is displayed if mouse pointer is placed over
      an archive name in the operation progress window. It can be useful
      if archive name is lengthy and does not fit to available window space.

  17. If -ts1 switch is used with -u or -f, file time comparison is performed
      with 1 second precision. Previosuly in such case we could wrongly treat
      an adding file as newer than archived just because we compared the high
      precision adding file time against the low precision archived file time.

  18. "Update" and "Fresh" commands ('u' and 'f' in the command line mode)
      quit immediately if no files are to be updated. Previously they created
      a temporary archive before quitting when updating archives with recovery
      record or quick open information.

  19. Prompt is issued after creating 500 volumes from WinRAR GUI shell,
      so user can continue or quit further archiving. It is done to prevent
      creating many thousands of volumes in case of wrongly entered
      volume size.

  20. WinRAR uses megabytes instead of bytes as default units for volume size
      field in the archiving dialog.

  21. "Repair" command issues "Recovery record is corrupt" message
      after repairing RAR5 archive containing a broken recovery record.
      Previously such message was issued only by "Test" command
      and "Repair" handled most of recovery record damages silently.

  22. Bugs fixed:

      a) fixed potential security issues when processing corrupt
         RAR archives;
      
      b) non-English characters in TAR files with PAX extended headers
         were not displayed correctly;

      c) "rar x arcname.rar .." command unpacked files to current folder
         instead of its parent;

      d) pasting files from Windows Explorer to archive opened in WinRAR
         blocked further copy and paste operations in Explorer until
         archiving was finished;

      e) SFX module issued "The specified password is incorrect" message
         infinitely not prompting for correct password once a wrong password
         was entered;

      f) folders time was always set when extracting ZIP archives even if
         "File time" options in the extraction dialog were turned off;

      g) if "Delete archive: Always" was selected when extracting
         and user pressed "Cancel" in the file overwrite or password prompt,
         an archive could be deleted even after cancelling extraction
         for .zip and .7z formats.

ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-560.exe

Link to comment
Share on other sites

  • 2 months later...

WinRAR 5.61 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით:

Version 5.61 beta 1

   1. "Delete archive" extraction option deletes all volumes even if user
      started extraction from non-first RAR volume, but first volume
      is present and all files are unpacked successfully. In such case
      previous versions ignored "Delete archive" even if WinRAR was able
      to locate the first volume and process the volume set from beginning.
   
   2. Compression ratio bar is not displayed on "Archive" page of
      Explorer file properties for archives with encrypted file names.
      WinRAR cannot reliably calculate it for such archives without
      a password and previously it just displayed 0% here.
   
   3. Bugs fixed:

      a) WinRAR displayed "The specified password is incorrect" message
         infinitely when attempting to open RAR5 archive with encrypted
         file names if wrong global password was set with Ctrl+P;

      b) memory management bug in the password dialog could lead to
         access to already freed memory followed by crash.
         This issue may be also associated with security risks;

      c) fixed a crash when processing corrupt RAR archives.
         This issue may be also associated with security risks;

      d) while starting, WinRAR could cause a brief flickering in menu bars
         of few other applications;

      e) WinRAR "Find" command matched "String to find" against all
         archived files ignoring "File names to find" mask when searching
         in CAB archives;

      f) SFX module "License" command did not set a title of license window;

      g) if "Start-up folder" in WinRAR settings included the trailing
         backslash, WinRAR ignored first "Up one level" command.

ესეც გადმოსაწერი ლინკი ინგლისური 64 ბიტიანი ვერსიის:  https://rarlab.com/rar/winrar-x64-560.exe

Link to comment
Share on other sites

  • 4 weeks later...

WinRAR 5.61 ფინალური ვერსია გამოვიდა შემდეგი ჩეინჯლოგით:


   Version 5.61

   1. "Delete archive" extraction option deletes all volumes even if user
      started extraction from non-first RAR volume, but first volume
      is present and all files are unpacked successfully. In such case
      previous versions ignored "Delete archive" even if WinRAR was able
      to locate the first volume and process the volume set from beginning.
   
   2. Compression ratio bar is not displayed on "Archive" page of
      Explorer file properties for archives with encrypted file names.
      WinRAR cannot reliably calculate it for such archives without
      a password and previously it just displayed 0% here.
   
   3. Bugs fixed:

      a) WinRAR displayed "The specified password is incorrect" message
         infinitely when attempting to open RAR5 archive with encrypted
         file names if wrong global password was set with Ctrl+P;

      b) memory management bug in the password dialog could lead to
         access to already freed memory followed by crash.
         This issue may be also associated with security risks;

      c) fixed crashes in corrupt RAR, ACE and LZH archives.
         This issue may be also associated with security risks;

      d) while starting, WinRAR could cause a brief flickering in menu bars
         of few other applications;

      e) WinRAR "Find" command matched "String to find" against all
         archived files ignoring "File names to find" mask when searching
         in CAB archives;

      f) SFX module "License" command did not set a title of license window;

      g) if "Start-up folder" in WinRAR settings included the trailing
         backslash, WinRAR ignored first "Up one level" command.

ესეც გადმოსაწერი ლინკი ინგლისური 64 ბიტიანი ვერსიის: https://rarlab.com/rar/winrar-x64-561.exe

Link to comment
Share on other sites

  • 3 months later...

Version 5.70 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით:

1. "Files to process" option on "Time" page of archiving dialog
      allows to choose files based on modification, creation or last access
      file time. Previously it was possible for modification time only.
   
   2. Command line -ta, -tb, -tn, -to switches accept 'm', 'c' and 'a'
      modifiers after the switch name. So file time conditions can include
      not only the file modification time as in previous versions,
      but also creation and last access time.

   3. WinRAR file list can display creation and last access file times
      if they are available.

      Creation and last access columns are disabled by default and can be
      enabled in "Select file list columns" dialog. This dialog is opened
      after right clicking on file list column headers or after pressing
      "File list/Files/Columns..." button in WinRAR settings.

   4. "Double extensions for archives" and "Archives in subfolders"
      options on "Files" page of archiving dialog modify behavior of 
      "Put each file to separate archive" option.

      You can switch between archive names in filename.ext.rar
      and filename.rar style with "Double extensions for archives".

      You can create a separate archive for every file in selected subfolders
      or store the entire contents of every selected folder in separate
      archive depending on the state of "Archives in subfolders" option.

   5. New -ad1 switch can be used when unpacking multiple archives
      recursively, such as 'rar x -r -ad1 arc\*.rar'. It creates
      a separate folder for files unpacked from each archive,
      but unlike already existing -ad switch, it creates such folders
      in each archive folder.

   6. If context menu "Extract each archive to separate folder" is applied
      to archives from different folders in Windows Explorer "Search results",
      subfolders with unpacked files are created in each archive folder.
      Previous versions created them all in a folder of right clicked archive.
   
   7. New "File list/List style/Checkboxes" option in WinRAR settings
      allows to use checkboxes to select file list items.

   8. New "File list/Files/Exact sizes" option in WinRAR settings.

      If this option is on, file sizes are always displayed in bytes.
      If it is off, sizes are rounded up and use units such as KB or MB.
      Smaller files can be still displayed in bytes.

   9. If several console RAR are started with -ioff switch, PC is turned off
      by RAR copy finished last. Previously this switch was processed
      by first finished copy.

  10. Read and write buffer size is increased for .iso files.
      It can help to improve .iso extraction performance in some cases,
      such as for network drives.

  11. If "Delete archive" option in extraction dialog is applied to a set
      of RAR and REV volumes in volname.part# format, WinRAR will delete
      REV volumes as well. Previously only RAR volumes were deleted
      keeping REV files intact.

  12. If "Delete archive" option in extraction dialog is applied to set
      of ZIP volumes with .zip.001, .zip.002, .zip.003 extensions,
      WinRAR will delete all ZIP volumes. Previously only .zip.001 volume
      was deleted for such volume naming scheme.

  13. If we unpack arcname.rar using "Extract to arcname\" Explorer context
      menu command and "arcname" file already exists, WinRAR shell extension
      will propose "Extract to arcname~1\" instead. Previously this context
      menu command attempted to create a folder with same name as already
      existing file and failed.

  14. If we pack a shortcut file with .lnk extension from Explorer context
      menu, .lnk file itself is added to archive. Previous versions added
      .lnk file target instead of .lnk file.

  15. Windows does not allow executables exceeding 4 GB, so WinRAR issues
      an error immediately when attempting to create 4 GB or larger
      RAR SFX volumes. Previously WinRAR issued such error only after
      creating the first RAR volume.

  16. Total extraction progress is displayed for 7z multivolume archives. 
      Accuracy of 7z total extraction progress is improved.

  17. Nadav Grossman from Check Point Software Technologies informed us
      about a security vulnerability in UNACEV2.DLL library.
      Aforementioned vulnerability makes possible to create files
      in arbitrary folders inside or outside of destination folder
      when unpacking ACE archives.

      WinRAR used this third party library to unpack ACE archives.
      UNACEV2.DLL had not been updated since 2005 and we do not have access
      to its source code. So we decided to drop ACE archive format support
      to protect security of WinRAR users.

      We are thankful to Check Point Software Technologies for reporting
      this issue.
   
  18. Bugs fixed:

      a) console RAR mixed up source and destination file sizes and times
         in the overwrite prompt when updating a file in RAR archive
         with -o switch;

      b) dragging files from 32-bit applications to 64-bit WinRAR window
         did not work;

      c) WinRAR Shift+Del command applied to a folder could fail to delete
         some its subfolders. This command is used to delete files and folders
         permanently instead of moving them to Recycle Bin;

      d) folder tree panel could not change folders if archived pathnames
         started from path separator, such as in archives created by tar tool
         with --absolute-names option;

      e) if relative "Path=.\somefolder" was specified in SFX comment
         and SFX archive needed to elevate privileges when extracting,
         it created 'somefolder\somefolder' instead of 'somefolder';

      f) commands modifying an existing RAR4 volume reset the volume number
         field to 1. While it did not affect extraction, WinRAR displayed
         a wrong volume number for such volumes;

      g) fixed a crash when reading a comment from a corrupt RAR file;

      h) toolbar in "Find" command "Search results" window was not adjusted
         to different toolbar icon sizes properly.

ესეც გადმოსაწერი ლინკი: https://rarlab.com/rar/winrar-x64-57b1.exe

 

Link to comment
Share on other sites

  • 4 weeks later...
Link to comment
Share on other sites

Version 5.70 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:


   Version 5.70

   1. "Files to process" option on "Time" page of archiving dialog
      allows to choose files based on modification, creation or last access
      file time. Previously it was possible for modification time only.
   
   2. Command line -ta, -tb, -tn, -to switches accept 'm', 'c' and 'a'
      modifiers after the switch name. So file time conditions can include
      not only the file modification time as in previous versions,
      but also creation and last access time.

      Such switch can include multiple modifiers to set the same date
      for all specified times. For example, -tamc20190215 will process files
      modified and created after 2019-02-15. 
      
      New 'o' modifier permits to switch from AND to OR logic,
      so -tamco20190215 includes files modified or created after 2019-02-15.
      It is also allowed to specify several time filtering switches
      with different dates in the same command line, like:
      -taco20190201 -tbmo20190210

      Switches -ta and -tn also include files matching the specified date
      exactly. Switches -tb and -to exclude such files.

   3. WinRAR file list can display creation and last access file times
      if they are available.

      Creation and last access columns are disabled by default and can be
      enabled in "Select file list columns" dialog. This dialog is opened
      after right clicking on file list column headers or after pressing
      "File list/Files/Columns..." button in WinRAR settings.

   4. "Double extensions for archives" and "Archives in subfolders"
      options on "Files" page of archiving dialog modify behavior of 
      "Put each file to separate archive" option.

      You can switch between archive names in filename.ext.rar
      and filename.rar style with "Double extensions for archives".

      You can create a separate archive for every file in selected subfolders
      or store the entire contents of every selected folder in separate
      archive depending on the state of "Archives in subfolders" option.

   5. New -ad1 switch can be used when unpacking multiple archives
      recursively, such as 'rar x -r -ad1 arc\*.rar'. It creates
      a separate folder for files unpacked from each archive,
      but unlike already existing -ad switch, it creates such folders
      in each archive folder.

   6. If context menu "Extract each archive to separate folder" is applied
      to archives from different folders in Windows Explorer "Search results",
      subfolders with unpacked files are created in each archive folder.
      Previous versions created them all in a folder of right clicked archive.
   
   7. New "File list/List style/Checkboxes" option in WinRAR settings
      allows to use checkboxes to select file list items.

   8. New "File list/Files/Exact sizes" option in WinRAR settings.

      If this option is on, file sizes are always displayed in bytes.
      If it is off, sizes are rounded up and use units such as KB or MB.
      Smaller files can be still displayed in bytes.

   9. If several console RAR are started with -ioff switch, PC is turned off
      by RAR copy finished last. Previously this switch was processed
      by first finished copy.

  10. Read and write buffer size is increased for .iso files.
      It can help to improve .iso extraction performance in some cases,
      such as for network drives.

  11. If "Delete archive" option in extraction dialog is applied to a set
      of RAR and REV volumes in volname.part# format, WinRAR will delete
      REV volumes as well. Previously only RAR volumes were deleted
      keeping REV files intact.

  12. If "Delete archive" option in extraction dialog is applied to set
      of ZIP volumes with .zip.001, .zip.002, .zip.003 extensions,
      WinRAR will delete all ZIP volumes. Previously only .zip.001 volume
      was deleted for such volume naming scheme.

  13. If we unpack arcname.rar using "Extract to arcname\" Explorer context
      menu command and "arcname" file already exists, WinRAR shell extension
      will propose "Extract to arcname~1\" instead. Previously this context
      menu command attempted to create a folder with same name as already
      existing file and failed.

  14. If we pack a shortcut file with .lnk extension from Explorer context
      menu, .lnk file itself is added to archive. Previous versions added
      .lnk file target instead of .lnk file.

  15. Windows does not allow executables exceeding 4 GB, so WinRAR issues
      an error immediately when attempting to create 4 GB or larger
      RAR SFX volumes. Previously WinRAR issued such error only after
      creating the first RAR volume.

  16. Total extraction progress is displayed for 7z multivolume archives. 
      Accuracy of 7z total extraction progress is improved.

  17. "Find" command "Disks and folders" drop down list has been renamed
      to "Search area". Additionally to already existing choices,
      it includes a new "Selected items" option restricting search
      to files and folders selected in WinRAR file list.

  18. "Find" command displays the number of found items in status bar.

  19. "Diagnostic messages" window displays archive names in a separate
      column to provide the better message visibility for lengthy
      archive names.
   
  20. Switch -isnd[-] in command line WinRAR mode allows to override
      "Enable sound" option in WinRAR settings. Use -isnd to turn sound
      notifications on and -isnd- to turn them off.

  21. Nadav Grossman from Check Point Software Technologies informed us
      about a security vulnerability in UNACEV2.DLL library.
      Aforementioned vulnerability makes possible to create files
      in arbitrary folders inside or outside of destination folder
      when unpacking ACE archives.

      WinRAR used this third party library to unpack ACE archives.
      UNACEV2.DLL had not been updated since 2005 and we do not have access
      to its source code. So we decided to drop ACE archive format support
      to protect security of WinRAR users.

      We are thankful to Check Point Software Technologies for reporting
      this issue.
   
  22. Bugs fixed:

      a) console RAR mixed up source and destination file sizes and times
         in the overwrite prompt when updating a file in RAR archive
         with -o switch;

      b) dragging files from 32-bit applications to 64-bit WinRAR window
         did not work;

      c) WinRAR Shift+Del command applied to a folder could fail to delete
         some its subfolders. This command is used to delete files and folders
         permanently instead of moving them to Recycle Bin;

      d) folder tree panel could not change folders if archived pathnames
         started from path separator, such as in archives created by tar tool
         with --absolute-names option;

      e) if relative "Path=.\somefolder" was specified in SFX comment
         and SFX archive needed to elevate privileges when extracting,
         it created 'somefolder\somefolder' instead of 'somefolder';

      f) commands modifying an existing RAR4 volume reset the volume number
         field to 1. While it did not affect extraction, WinRAR displayed
         a wrong volume number for such volumes;

      g) fixed a crash when reading a comment from a corrupt RAR file;

      h) toolbar in "Find" command "Search results" window was not adjusted
         to different toolbar icon sizes properly.

ესეც გადმოსაწერი ლინკი 64 ბიტიანი ინგლისური ვერსიის: https://rarlab.com/rar/winrar-x64-570.exe არის სხვა ენებზეც და 32 ბიტიანი ვარიანტიც

Link to comment
Share on other sites

  • 1 month later...

WinRAR 5.71 beta 1 გამოვიდა შემდეგი ჩეინჯლოგით:

 Version 5.71 beta 1
   
   1. "Convert archives" command:

      a) improved performance when processing a lot of small archives
         in Windows 10;

      b) fixed memory leaks which could lead to excessive memory use
         when converting to ZIP format.

   2. Corrupt ZIP archive processing:

      a) "Repair" command replaces packed and unpacked file sizes stored
         in local file header with sizes from central directory
         if local header sizes look invalid;

      b) file extraction is stopped at unpacked size stored in ZIP headers
         even if available packed data allows further extraction.
         It is done to prevent unexpected hard drive space usage.

   3. Ctrl+C allows to abort RAR "l" command quickly. In previous versions
      it could take several seconds until list command stopped.

   4. Bugs fixed:

      a) if "Save archive name" and "Add to context menu" options were
         set in compression profile parameters and profile was invoked
         from Explorer context menu, WinRAR proposed an automatically
         generated archive name instead of name saved in profile.

      b) WinRAR displayed an unneeded pair of round brackets in "Archive"
         column of "Diagnostic messages" window for system error messages;

      c) "Extract to folder\" Windows Explorer context menu command could
         fail to unpack ZIP archives if their names included a numeric 
         part followed by .zip extension, arbitrary data was present
         before the first file record and "Remove redundant folders from
         extraction path" WinRAR option was switched on;

      d) in "RAR x -x<mask> arcname" command, parent folders of files
         matching the specified mask also were excluded from extracting;

      e) "Find" command returned the current folder own name additionally
         to its contents for "Current folder" search area if folder name
         matched "File names to find" mask;

      f) if "Find in files" and "Find in archives" are both enabled,
         "Find" command did not match an archive name itself against
         "File names to find" mask after searching inside of archive.
         So it did not display archive names for masks like *.rar 
         and applied this mask only to files inside of archives;

      g) when running an executable directly from archive, WinRAR 5.70
         did not set a temporary folder with unpacked files as current.
         So executables attempting to access other archived files
         in current folder could fail to work;

      h) WinRAR could be inaccessilbe for few seconds after closing
         an archived file opened in internal viewer in Windows 10;

      i) dragging a file to subfolder of ZIP archive with "Store full paths"
         option enabled produced invalid pathnames consisting of repeated
         subfolder name. Same invalid pathnames were produced if adding files
         to ZIP archive with -ap<folder> -ep2 switches.

ესეც გადმოსაწერი ლინკი ინგლისური 64 ბიტიანი ვერსიის: https://rarlab.com/rar/winrar-x64-571b1.exe

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.