Jump to content

cFosSpeed


Recommended Posts

ახალი ბეტა ბილდი გამოვიდა კიდე ერთი ფიქსით:

cFosSpeed 10.51 build 2357

x Fixed a rare bluescreen that was introduced in build 2350.  Fixed.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2357.exe

Link to comment
Share on other sites

  • 3 weeks later...
  • Replies 503
  • Created
  • Last Reply

Top Posters In This Topic

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.51 build 2358

x Fixed an long-standing bug in RWIN expansion that could lead to slow 
  connection setups.

x Fixed a display bug in "current connections" which didn't indicate user-changed
  prio.

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2358.exe

Link to comment
Share on other sites

  • 3 weeks later...

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.51 build 2359

+ When cFosSpeed was transferring lots of data, spd commands and current 
  connections could sometimes answer very slowly.  Fixed.

x Fixed memory leak in driver.

x Fixed UDP connection count.

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2359.exe

Link to comment
Share on other sites

  • 4 weeks later...

ხალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:


cFosSpeed 10.51 build 2360

+ In the advanced current connection dialog, large numbers are now displayed
  with separators.

+ Changed HTTP requests so they are hopefully more compatible with certain
  proxies.

x Fixed several bugs in dialogs for usage graph and priority settings.

x Fixed "spd cons -cps" speed display.

x Fixed "spd tcb <remote wild>".  You can specify a wildcard for the remote 
  address:port pair.  The wildcard is case-insensitive, IPv6 addresses 
  are in "[]" and IPv6 addresses are written as short as possible (omitting
  leading zeros and using the "::" abbreviation.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2360.exe

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.51 build 2361

- Build 2360 generated a bogus virus detection by Yandex Safebrowsing.  This 
  new build is just to avoid that.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2361.exe

სხვებთან არ ვიცი რა ხდება მაგრამ ჩემთან დაყენების დროს შეცდომას აგდებს და არ ეშვება გამშვები, ავდექი და დროებით ალფა ბილდი დავაყენე რახან წინა ვერსია მივაშალე http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2401-alpha.exe გამოვა ალბათ მოგვიანებით შესწორებული ვერსიაც, დაჟე დამეზარა დარეპორტება

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.51 build 2362

+ Removed "idle" class.  Now every connection with set L7-protocol and known 
  program name gets a class assigned right away.

- Build 2361 still generates a bogus virus detection by Yandex Safebrowsing.  All
  other virus checker from virustotal.com return negative results.

ეგ უკვე ნორმალურათ მუშაობს ალფაბილდს ისევ ეგ ბეტა ჯობია სტაბილურობის მხრივ, ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2362.exe

 

 

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა (ალფა ბილდი ბეტათ გადაკეთდა) შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2402

* Alpha has become beta!

x Fixed bug in bulk detection: if downloading with HTTP, bulk streams would be 
  re-classified as HTTP_C for a short time after each new GET.  Fixed.

x Fixed statistics for LSO/RSC packets.

- Removed mtu_limit variable.
  

cFosSpeed 10.59 build 2401 alpha

x Fixed Bluescreen caused by LSO packet without MSS info.  Thanks to Priben 
  Kranz for crash dump.
  

cFosSpeed 10.59 build 2400 alpha

* Extensive re-write of the cFosSpeed core networking code:
  
  -- Special speed-up for pass-through LAN traffic (not traffic shaped)
  -- Designed to keep all out-of-band packet info intact, resulting in 
     improved ad hoc VPN compatibility
  -- Improved analysis of networking edge cases
  -- Support for NDIS header/data split     
  -- Additional speed improvements of Traffic Shaping path
  -- Support for Task Offloading: Checksum Offloading (IP and TCP/UDP), Large 
     Segment Offloading and Receive Segment Coalescing

  With the new networking code cFosSpeed has only barely noticeable CPU load 
  even at full blast 10 GBit/s LAN traffic!

  Alpha version!  Please test and report.  This version might be unstable, so 
  don't use it in a production environment.

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2402.exe

რასაც ვუყურებ რაღაცეები შეუცვლიათ

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2403

x Fixed a bluescreen.  Thanks to a11111135 for crash dump.

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2403.exe

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:


cFosSpeed 10.59 build 2404

x Hopefully fixed a crash reported by leozhdan.

- When allocating memory, only nonpaged memory will now be used.  No more
  allocation and locking of paged memory is performed.  This worked only
  very rarely anyway.

- Update to Visual Studio 2019.

- Removed variables fixed_speed, data_compression and vj_compression.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2404.exe

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა კიდე შემდეგი ერთი ფიქსით:

cFosSpeed 10.59 build 2405

x Fixed another bluescreen reported by leozhdan.
 

http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2405.exe

ეგ ბლურსკინები ჩემთან არ ქონია ისე რაც მაგ ლოგებში უწერიათ რომ დაფიქსეს, მაგრამ მაინც დასაფიქსი იყო, როგორც ჩანს რედკი ბლუსკრინებია

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ფიქსით:

cFosSpeed 10.59 build 2406

x Fixed erroneous "no ping" error message when connecting through dial-up.
  Thanks to myfootstep for traces and tests.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2406.exe

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2407

x Again fixed (the fix from build 2406) erroneous "no ping" error message.
  Thanks to Daniel Hänel for traces.

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en/download/start-download.htm?file=/beta/cfosspeed-v1059-build2407.exe

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2408

x Kernel mode pingers and UDP user mode pinger didn't work.  Fixed.

x When task offloading was active and cFosSpeed was dumping, packets would be
  erroneous decoed as "chksum bad".  Fixed.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en/download/start-download.htm?file=/beta/cfosspeed-v1059-build2408.exe

სრულყოფილი კრეკი მაგ ბოლო ბეტა ვერსიებზე არაა, მაგრამ cfosspeed.10.xx.(x64)-patch ვხმარობ და აღარ მიჭამს ტვინს ლიცენზია იყიდეო, როცა გასდის ვადა ხელახლა ატარებ და მორჩა, რედკათ ხდება ხოლმე ეგ

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2410

+ Speeded reaction time in RWIN expansion thus increasing throughput.

x Fixed a bluescreen when fragmented packets where dumped.  Thanks to
  a11111135 for crash dump.

x Fixed TCP connection problem on connections without TCP WSCALE if RWIN
  expansion was enabled.

x Fixed spd adapter_info -json.

- Dumps will reflect TCP/UDP checksum offloads more correctly.
 

cFosSpeed 10.59 build 2409

* Added new pingers: UDPv6.  This should make cFosSpeed's pings even more
  stable.

+ All dialog pages are now integrated into the main navigation.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2410.exe ვუყურებ RWIN დაუხვეწიათ კიდე მაგ ახალ ბილდში, ვტესტავ ეხლა აბა, აქამდე გამორთული მქონდა ეგეც და 

Prioritize process in foreground window

Automatically set the priority of the process in foreground window to high.

რახან ლაგებს იწვევდა და პირიქით დაჟე ანელებდა ინტერნეტს, შეიძლება როუტერზე არ ვარგა ეგ ფიშკა არ ვიცი, ან ბოლომდე არ იყო დახვეწილი, თუ მომეწონა ლონგ რანში დავტოვებ, თუ არა და ისევ გამოვურთავ, იდეაში კი გათვლილია საიტებზე უფრო სწრაფათ შესასვლელათ როცა სტანდარტული პარამეტრები არ ყოფნის ზოგიერთ დაგრუზულ საიტზე, მაგრამ ინპუტ ლაგი გაზარდოს შეიძლება და აქამდე არ ვიყენებდი ხოლმე

 

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2412

x Fixed a rare bluescreen.

- Added memory debugging to find strange crashes.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2412.exe

RWIN და პრიორიტეტი გამოვურთე სეტინგებიდან, მაგის გარეშე უფრო ნორმალურათ უბერავს და არ ლაგავს, მაგ ორ გალოჩკას რომ ვურთავ მარტო რამდენიმე საიტზე სწრაფდება გვერდის გახსნა, სხვებზე პირიქით ინპუტ ლაგი აქვს ზედმეტი, ვიდეობზეც მემგონი მცირე ლაგები ეწყება ლონგ რანში, ეგრე ჯობია მოკლეთ

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2413

x Fixed a crash in spd.exe service.

x Fixed a leak of packets if expand_rwin was active.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2413.exe

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლიგით:

cFosSpeed 10.59 build 2415

x Finally, we have (hopefully) fixed a bluescreen that plagued certain users
  for some time.  Thanks to aleksxp for testing and dumps.

cFosSpeed 10.59 build 2414

x Fixed a condition that could lead to starving TCP connections when RWIN
  expansion was used.

x Fixed a crash in spd.exe service, this time for real.

+ Added new "spd gset passthru" modes.  So far we had:
    0 = switch off passthru mode - data is put through driver.
    1 = do as little as possible to hand packets to the next driver.
    2 = do all the port handling, but don't analyze or modify packet.
  Now we add:
    3 = tx data: like 1, rx data: like 2.
    4 = tx data: like 2, rx data: like 1.
  Debugging purpose only.

- RWIN expansion will now by default negotiate windows that allow full blast
  downloads with an RTT of 200 ms.  Change expand_rwin_dest_time if you want
  a different time.
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2415.exe

Link to comment
Share on other sites

  • 2 weeks later...

ახალი ბეტა ბილდი გამოვიდა კიდე შემდეგი ჩეინჯლოგით:


cFosSpeed 10.59 build 2416

x Fixed serious bug in WAN mode.  Thanks to ckcampbell1963 for memory dump.

x Sometimes the language selected at installation time wasn't used in the
  demon.  Likewise, a language change in the daemon would not change the
  language for the next installation.  Fixed.

ესეც გადმოსაწერი ლინკი:  http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2416.exe

 

Link to comment
Share on other sites

Corona relief: cFosSpeed life-time license for free!  http://www.cfos.de/en-us/beta/index.htm# უფასოთ არიგებენ სამუდამო ლიცენზიებს კორონავირუსის გამო, მარტო სახელი, გვარი და e-mail უნდა ჩაწერო და 1-2 დღეში მოგივა კლუჩიკი მეილზე, მე უკვე გავაგზავნე, კრაკები და ეგეთები აღარ დაჭირდება არც ბეტა ვერსიებს და არც ფინალურს, მე მაინც სულ ბეტებზე ვზივარ ხოლმე

Link to comment
Share on other sites

უკვე მოვიდა, კლუჩიკი ცალკე მეილზე და მანდვე პასვორდიც გამოუშვეს მანდ შესაყვანი და გააქტიურდა ლოლ:

IYsItJ0.png

ლუბოი ვერსიაზე მიდის ბეტების ჩათვლით და სამუდამოა, 10 დღე კიდე უფასო გაგრძელდება კლუჩიკების დარიგება თუ რამეა, სამუდამო არ გეგონოთ

Link to comment
Share on other sites

  • 2 weeks later...

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 10.59 build 2417

+ Checksum errors are now counted if they were indicated by task offloading,
  even if cFosSpeed's checksumming is off (checksum_ip/tcp/udp = 0).
 

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1059-build2417.exe

Link to comment
Share on other sites

cFosSpeed 11 ფინალური ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 11.00 build 2420 -- 21-Apr-2020

* Extensive re-write of the cFosSpeed core networking code:

  -- Special speed-up for pass-through LAN traffic (not traffic shaped)
  -- Designed to keep all out-of-band packet info intact, resulting in
     improved ad hoc VPN compatibility
  -- Improved analysis of networking edge cases
  -- Support for NDIS header/data split
  -- Additional speed improvements of Traffic Shaping path
  -- Support for Task Offloading: Checksum Offloading (IP and TCP/UDP), Large
     Segment Offloading and Receive Segment Coalescing

  With the new networking code cFosSpeed has only barely noticeable CPU load
  even at full blast 10 GBit/s LAN traffic!

* Added a new API to get current connections info, which is 20(!) times faster
  than the old one.

  The current connections dialog now displays a CPS history of the last 15
  secs.

* If several routes to the Internet exist simultaneously, cFosSpeed can now
  use all of them for Traffic Shaping.  This is especially useful if you have
  a balancing setup, e.g., one LAN adapter and one mobile adapter in use at
  the same time.

* Added new pingers: UDPv6.  This should make cFosSpeed's pings even more
  stable.

+ Removed "idle" class.  Now every connection with set L7-protocol and known
  program name gets a class assigned right away.

+ Added new "spd gset passthru" modes.  So far we had:
    0 = switch off passthru mode - data is put through driver.
    1 = do as little as possible to hand packets to the next driver.
    2 = do all the port handling, but don't analyze or modify packet.
  Now we add:
    3 = tx data: like 1, rx data: like 2.
    4 = tx data: like 2, rx data: like 1.
  Debugging purpose only.

+ All dialog pages are now integrated into the main navigation.

+ Reaction time in RWIN expansion was speeded thus increasing throughput.

+ Changed HTTP requests so they are hopefully more compatible with certain
  proxies.

+ For click-through-auto mode, you can now configure the time needed to switch
  off click-through (the time you need to hover the mouse pointer over the
  cFosSpeed window).  To change that time, set the key
    click_through_time=<secs>
  in file %LOCALAPPDATA%\cfos\cfosspeed\user_data.ini, section [All].  Default
  is 3 secs.  Thanks to leon479959891 for the suggestion.

+ Added "spd flush_usage_logs".  Speeded "spd flush".

+ To save processing power, the cFosSpeed service now uses routing / address /
  interface change notifications to monitor route changes instead of a
  periodic timer.

+ Optimized handling of how used programs are tracked and stored.  It is now
  faster and more consistent.

+ Used tech from cFos Personal Net to make the internal web server of the
  cFosSpeed service more responsive.

+ "spd pcnt" will only work if new flag global_counters is set to 1.  Enable
  it with "spd gset global_counters 1".

+ Added time to "X" type line of metadata dump.  This line is printed when a
  TCP or UDP connection is killed.

+ cFosSpeed can now display a toast notification under Win 10 Build 17763+.
  A click on the new version update notification leads to our web page, where
  you can download the installation archive.

+ By default, full screen detections requires that the full screen window is
  on the same monitor as the cFosSpeed status window.  You can change it so
  full screen is detected even if the full screen window is on a different
  monitor than the cFosSpeed status window, by setting
  "per_monitor_fullscreen=0" in the file
  c:\users\<you>\appdata\local\cfos\cfosspeed\user_data.ini
  section [All].  Thanks to Ori for the suggestion.

  Added a setting where you can turn off full screen detection if the
  fullscreen window is not on the same monitor.

+ Added IPv6 support for IPlists.  The format is the same as for IPv4, just
  with IPv6 addresses instead.  Since IPv6 addresses contain ':', it is assumed
  that Protowall format IPlists do not use ':' in the "name" portion.  If that
  becomes a problem, use Emule format instead.

  cFosSpeed will only use the prefix, i.e., the upper 64 bits of an IPv6
  address, since the lower 64 bits are the interface identifier and are
  entirely local.

+ When the stored password to your license is lost or wrong, the screen that
  asks for it anew will now also accept your 30-char serial number, if that is
  how you got your key.

x Sometimes the language selected at installation time wasn't used in the
  demon.  Likewise, a language change in the daemon would not change the
  language for the next installation.  Fixed.

x Fixed a condition that could lead to starving TCP connections when RWIN
  expansion was used.

x Sometimes packets were leaked if expand_rwin was active, i.e., some packets
  were never freed.  This lead to memory problems and hangs when uninstalling/
  reinstalling cFosSpeed.  This was a long-standing bug.  Fixed.

x Fixed TCP connection problem on connections without TCP WSCALE if RWIN
  expansion was enabled.

x Fixed bug in bulk detection: if downloading with HTTP, bulk streams would be
  re-classified as HTTP_C for a short time after each new GET.  Fixed.

x Fixed "spd tcb <remote wild>".  You can specify a wildcard for the remote
  address:port pair.  The wildcard is case-insensitive, IPv6 addresses
  are in "[]" and IPv6 addresses are written as short as possible (omitting
  leading zeros and using the "::" abbreviation.

x Fixed a long-standing bug in RWIN expansion that could lead to slow
  connection setups.

x When cFosSpeed was transferring lots of data, spd commands and current
  connections could sometimes answer very slowly.  Fixed.

x Fixed a display bug in "current connections" which didn't indicate user-
  changed prio.

x Fixed bug which caused 100% load on one core.

x Fixed a bug where the cFosSpeed status window would not regard the position
  of the system taskbar with auto-arrange.  Thanks to George H.

x Many of the fixes could only be done with help of many friendly users that
  send traces and dump files, like: ckcampbell1963, aleksxp, a11111135, Daniel
  Hänel, myfootstep, leozhdan, Priben Kranz, Drool and Contor.  Thanks to you
  all!

- RWIN expansion will now by default negotiate windows that allow full blast
  downloads with an RTT of 200 ms.  Change expand_rwin_dest_time if you want
  a different time.

- When allocating memory, only nonpaged memory will now be used.  No more
  allocation and locking of paged memory is performed.  This worked only
  very rarely anyway.

- Update to Visual Studio 2019.

- Removed variables mtu_limit, data_compression_*, vj_compression_*,
  fixed_speed and add_overhead_*.

- (Re)setting the prio class will now have immediate visual effect, even if
  there is no data on the connection.

- Support for Windows 19H2, November 2019 Update and Windows 19H1 (version
  1903).

- Removed the option to disable the taskbar icon. You can use the Windows
  taskbar configuration dialog to hide the taskbar icon if you want.

- Removed WMI and keyboard LED support.  All variables / values are available
  via our built-in web server.

მაგხელა ჩეინჯლოგი ნუ გაგაოცებთ, 1 წელზე მეტია მარტო ბეტები გამოდიოდნენ და თან საკმაოთ დიდი აბიომებით გრძელვადიანი პერერივების გარეშე, ესეც გადმოსაწერი ლინკი:

http://www.cfos.de/en-us/download/start-download.htm?file=/cfosspeed-v1100.exe 17$ დაუგდიათ მაგ პროგრამის სამუდამო ლიცენზიის ფასი, თუმცა მე უფასო კლუჩიკი გამომიგზავნეს პანდემიის გამო რაღაც აქცია რომ ქონდათ 10 დღიანი

 

Link to comment
Share on other sites

შეუბერეს ისევე 11.01 ბეტა ბილდების გამოშვება შემდეგი ჩეინჯლოგით:

cFosSpeed 11.01 build 2432

x Fixed bug in setup where key file is downloaded.  This could have been 
  responsible for connection problems from China.

x Fixed bug in handling of WAN devices.  This could have prevented some VPNs
  from work.

- Support for May 2020 update of Windows 10, version 2004, codename 20H1.

cFosSpeed 11.01 build 2431

x Fixed crash in installer.

x Fixed rare bluescreen.  Thanks to gobletfire for kernel dump.

x Hopefully fixed problem with key activation.

- Added proper counting of header errors and unsupported header/data split
  points.

- Improved readability of NDIS traces.

cFosSpeed 11.01 build 2430

x (Unsuccessfully) tried to fix an incompatibility with Killer Networking NIC.
  Thanks to Mathias Schmitt and BlankFX for bug reports and testing.

x Fixed NDIS func_trace output.

- Added more trace output for key download.

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1101-build2432.exe

როგორც ჩანს დაწყებული ქონდათ ბეტაზე მუშაობა და უბრალოთ არ დებდენ ლინკებს საიტზე ფინალური ვერსია რომ დაეყენებინა ბევრს, რახან სრაზუ სამი ბილდის ჩეინჯლოგი დაიდო, მაგ ბოლოს კი უკვე ვინდოუს 10 2004 საპორტიც დაემატა

Link to comment
Share on other sites

ახალი ბეტა ბილდი დაიდო კიდე შემდეგი ჩეინჯლოგით:

cFosSpeed 11.01 build 2433

x Do not handle packets that have a header/data split at an unusual point.

ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1101-build2433.exe

Link to comment
Share on other sites

ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით:

cFosSpeed 11.01 build 2434

+ Much better dumping of packets when task offloading is active.

x Fixed issues in RWIN expansion and DNS TTL patching where checksums were
  corrupted.  Thanks to all the tests and traces I got from Contor, kasiusz.j,
  robert korneluk, Vladimir Varbanov, BlankFX and Mathias Schmitt.

ესეც გადმოსაწერი ლინკი http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1101-build2434.exe

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.