George Posted September 18, 2018 Author Share Posted September 18, 2018 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: - Added more programs to settings.ini for prioritization. x Clicking on the status windows turned off auto-arrange. Pressing ESC while moving the window did not restore it to the original position. Fixed, thanks to Kikka. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2327.exe Quote Link to comment Share on other sites More sharing options...
George Posted October 13, 2018 Author Share Posted October 13, 2018 ახალი ბეტა ბილდი დაიდო შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2328 x Fixed some spurious problems with meta dumps. Windows version number is now included in meta dump. x Improved dumping speed. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2328.exe Quote Link to comment Share on other sites More sharing options...
George Posted October 20, 2018 Author Share Posted October 20, 2018 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2329 + cFosSpeed's foreground window detection will automaticall grant high prio to data from the current foreground process (as long as it's in the foreground). This could lead to the case where you upload/download and all that data is set to high, effectively congesting the whole line, even for small high-prio data (like DNS or VoIP). This is now fixed: only non-bulk data from fg processes is set to high and bulk data is now elevated to normal. That's still better than low, which is where is would normally go. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2329.exe Quote Link to comment Share on other sites More sharing options...
George Posted October 26, 2018 Author Share Posted October 26, 2018 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2330 + Optimized amount of in-flight data that cFosSpeed allows (sort of a global RWIN) for lower ping times. This should lower your ping times by about 30 msec if your are transferring data at the same time. + If low latency mode is switched on and non-cooperative mode is selected, cFosSpeed will act as if in cooperative mode, that is we're trading high bandwidth for low ping time. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2330.exe Quote Link to comment Share on other sites More sharing options...
George Posted December 4, 2018 Author Share Posted December 4, 2018 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2331 x Fixed a bug where the program list in the add new program dialog was not updated correctly. Thanks to Tim M for reporting it. x Fixed very old bug that could lead to to bluescreen in rare circumstances. Thanks to Philippe Bertrand for dump file. x Fixed a possible deadlock (freeze). - Switched to new compiler. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2331.exe სერვერზე არ აიტვირთა ჯერ ეტყობა და დროებით 10.26 წინა ფინალური ვერსიას იწერს, ალბათ დაფიქსავენ ლინკს ცოტა მოგვიანებით Quote Link to comment Share on other sites More sharing options...
George Posted December 5, 2018 Author Share Posted December 5, 2018 გასწორდა უკვე ლინკი, ენის შეცვლამ და ისევ ინგლისურზე დაბრუნებამ უშველა თუ მაინც 10.26 ვერსია ამოაგდო Quote Link to comment Share on other sites More sharing options...
George Posted December 10, 2018 Author Share Posted December 10, 2018 ახალი ბეტა ბილდი გამოვიდა კიდე შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2332 x Fixed a bug where the cFosSpeed status window is not opened automatically after system standby. - Added some trace output to find a problem where LAN ports will open and close with a frequency of about 10 seconds. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2332.exe ისე მე რაში მჭირდება ეგ მაგრამ ვინც ონლაინში უბერავს ბევრჯერ მინახია ფორუმებზე კომენტებში რომ პინგს ასწორებსო ეგ პროგრამა სერვერებზე Quote Link to comment Share on other sites More sharing options...
George Posted December 15, 2018 Author Share Posted December 15, 2018 ახალი ბეტა ბილდი გამოვიდა კიდე შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2333 - Tested with Windows 10 Octover 2018 Update, version 1809, codename Redstone 5. - New SDK used. This includes mitigation against certain Spectre attacks. - Added / corrected several games in prioritization list. Thanks to mgrxabi. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2333.exe Quote Link to comment Share on other sites More sharing options...
George Posted January 17, 2019 Author Share Posted January 17, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2334 + The entries in the current connections dialog are now sorted according to their speed. + If the skin window is in click-though mode, it will change to click-opaque mode if you hover with your mouse cursor over it for 4 seconds (and will revert back to click-through mode if the cursor is not in the window for 4 seconds). So, if the skin window prevents you from interacting with other windows, you can use the click-through mode. + Skin window position is now stored relative to the nearest corner of the current monitor. Thereby the position is always fixed relative to that corner if you change the monitor resolution. + cFosSpeed now tracks DUPACKs to be able to assess connection quality. "spd ns" has now a row with "Duplicate ACKs". + "spd cons" has now rows for tx'ed DUPACKs (a sign for receive quality) and tx resends (a sign for transmit quality). + "spd cons" now accepts a "-head:<n>" parameter to only print the first <n> connections. x Actions on buttons in skin windows were disabled. Fixed. - Added more games to the prioritization list. Thanks again to Sc3ed. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2334.exe Quote Link to comment Share on other sites More sharing options...
George Posted February 16, 2019 Author Share Posted February 16, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2335 * Install and uninstall now also clean the driver store from cFosSpeed INF files. If an install is still unsuccessful or results in "driver not loaded" problems, you can run the installation, ignore errors and then run a deinstall. This should clean the driver store from old cFosSpeed INF files. * cFosSpeed now tracks the host name from HTTP, TLS and QUIC conenctions. It can be displayed with "spd cons -host". This will print the host name instead of the remote address. If you want both, use "-host2" or "-host -remote" instead. * This new feature is also available in the "current connections (advanced)" dialog. * Advanced connection overview (and "spd cons" as well) now only keeps one UDP pseudo-connection per DNS server. This prevents a load of UDP DNS pseudo-connections that were just used for one DNS query. + Status window positions are now stored per network adapter, regardless of router MAC. This should eliminate confusion when the network adapter is sed with different routers. + Improved usability of the context menu. + Advanced connection overview (and "spd cons" as well) is now by default sorted by protocol (first TCP, then UDP), then by local IP address:port, then remote. IPv4 is sorted in front of IPv6. + Added more games and other programs to the program prioritization UI. + click-through now has its own sub-menu. You can now chose between "off", "click-through" (always) and "click-through (auto)" (will switch off after 4 secs of mouse hover, and on again if your mouse is not over the window for 4 secs). Thanks to Death_Master for the suggestion. + Fixed and improved sorting in advanced connection overview: column "class" is now ordered by prio, "prot" by protocol/local/remote and the columns have a default order that makes sense (i.e. the most important at the top or alphabetical). - Removed old, long unused code. Removed filter rules -ppp, -mp-header, -mp-begin, -mp-end, -mp-frag, -pppp that were always false anyway (since cFosSpeed would never get PPP frames). - Internal modernization of interlocked variables. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2335.exe Quote Link to comment Share on other sites More sharing options...
George Posted February 24, 2019 Author Share Posted February 24, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2336 * In the Prioritize Programs dialog you can now select to display the used programs only (instead of all programs). * settings.ini and thereby the list of default program priorities is now updated automatically. If you don't want this, delete the key named 'version' in the section [All] at the end of the file. + The list of used programs is now updated periodically and not only when the usage graph is opened. x Fixed problems with the Logitech Display Keyboards introduced in the last beta. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2336.exe მე ისევ ამ პაჩს ვხმარობ ისე გასააქტიურებლათ Patch.cFosSpeed 10.24 Build 2304 [Kubusoft.com] ბოლომდე ვერ ააქტიურებს და სრულდება ლიცენზია, მაგრამ მერე თიშავ ტასკბარიდან მაგ პროგრამას და ხელახლა ატარებ მაგ პაჩს და ისევ მუშაობს 1 თვით სადღაც, მაგრამ ვადა რამდენი დარჩა და ყიდვის შემოთვაზებას აღარ გიწერს ზატო Quote Link to comment Share on other sites More sharing options...
George Posted March 9, 2019 Author Share Posted March 9, 2019 ახალი ბეტა ბილდი გამოვიდა კიდე შემდეგი ჩეინჯლოგით: cFosSpeed 10.27 build 2337 + Added option in the program update menu to enable / disable automatic updates of settings.ini + "spd cons -host" will now show also the port number after the host name. x Fixed a bug where auto-hide on fullscreen hid the status window even if the fullscreen window was on a different monitor. x Fixed a bug in the update of used programs. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1027-build2337.exe Quote Link to comment Share on other sites More sharing options...
George Posted March 22, 2019 Author Share Posted March 22, 2019 ფინალური ბილდი გამოვიდა შემდეგი უზარმაზარი ჩეინჯლოგით: cFosSpeed 10.50 build 2338 -- 21-Mar-2019 * In the Prioritize Programs dialog you can now select to display the used programs only (instead of all programs). * settings.ini and thereby the list of default program priorities is now updated automatically. If you don't want this, delete the key named 'version' in the section [All] at the end of the file. There is an option in the program update menu to enable / disable this automatic update. * Install and uninstall now also clean the driver store from cFosSpeed INF files. If an install is still unsuccessful or results in "driver not loaded" problems, you can run the installation, ignore errors and then run a deinstall. This should clean the driver store from old cFosSpeed INF files. * cFosSpeed now tracks the host name from HTTP, TLS and QUIC conenctions. It can be displayed with "spd cons -host". This will print the host name instead of the remote address. If you want both, use "-host2" or "-host -remote" instead. This new feature is also available in the "current connections (advanced)" dialog. * Advanced connection overview (and "spd cons" as well) now only keeps one UDP pseudo-connection per DNS server. This prevents a load of UDP DNS pseudo-connections that were just used for one DNS query. * Added installer checkbox to allow us to occasionally (max. once a year!) collect some anonymous meta data from your connections (we clear out your IP address). This is to help us develop a new and improved form of traffic class detection. Please switch it on, we need real live traffic data to develop this new feature. For a detailed list of collected data, see http://www.cfos.de/collected-data.txt * click-through now has its own sub-menu. You can now chose between "off", "click-through" (always) and "click-through (auto)". In auto mode, the window will change to click-opaque mode if you hover with your mouse cursor over it for 4 seconds (and will revert back to click-through mode if the cursor is not in the window for 4 seconds). So, if the skin window prevents you from interacting with other windows, you can use the click- through mode. Thanks to Death_Master for the suggestion. + The list of used programs is now updated periodically and not only when the usage graph is opened. + Status window positions are now stored per network adapter, regardless of router MAC. This should eliminate confusion when the network adapter is used with different routers. + Improved usability of the context menu. + Advanced connection overview (and "spd cons" as well) is now by default sorted by protocol (first TCP, then UDP), then by local IP address:port, then remote. IPv4 is sorted in front of IPv6. + Added more games and other programs to the program prioritization UI. + Fixed and improved sorting in advanced connection overview: column "class" is now ordered by prio, "prot" by protocol/local/remote and the columns have a default order that makes sense (i.e., the most important at the top or alphabetical). + The entries in the current connections dialog are now sorted according to their speed. + Skin window position is now stored relative to the nearest corner of the current monitor. Thereby the position is always fixed relative to that corner if you change monitor resolution. + cFosSpeed now tracks DUPACKs to be able to assess connection quality. "spd ns" has now a row with "Duplicate ACKs". + "spd cons" has now rows for tx'ed DUPACKs (an indicator for receive quality) and tx resends (an indicator for transmit quality). + "spd cons" now accepts a "-head:<n>" parameter to only print the first <n> connections. + Optimized amount of in-flight data that cFosSpeed allows (sort of a global RWIN) for lower ping times. This should lower your ping times by about 30 msec if your are transferring data at the same time. + If low latency mode is switched on and non-cooperative mode is selected, cFosSpeed will act as if in cooperative mode, that is, we're trading high bandwidth for low ping time. + cFosSpeed's foreground window detection will automaticall grant high prio to data from the current foreground process (as long as it's in the foreground). This could lead to the case where you upload/download and all that data is set to high, effectively congesting the whole line, even for small high-prio data (like DNS or VoIP). This is now fixed: only non-bulk data from foreground processes is set to high and bulk data is now elevated to normal. That's still better than low, which is where is would normally go. + cFosSpeed version and build numbers are saved to registry to HKLM\SOFTWARE\cFos\cFosSpeed. + When using "spd tcb" command you can now add a wildcard to specify which connection to display, like "spd tcb 8.*:80" or "spd tcb 8.*:*". + Added new TCP counter in "spd netstat": Data segments. This will only be increased if the segment contains any data (i.e. is non ACK-only). It now allows for a more accurate calculation of resent percentage. + Added support for Windows 10 version 1803, a.k.a. Spring Creators Update, a.k.a. Redstone 4. + Added L7 detection of certain QUIC packets. + Improved evaluation of the User-Agent string for the L7 protocol detection. + The L7 protocol data field now contains the HTTP Host header field in addition to the Content-Type. + Improved "spd ports" display. x Fixed multiple bugs where the status window didn't re-open after hibernate/ sleep. x Fixed a bug where auto-hide on fullscreen hid the status window even if the fullscreen window was on a different monitor. x Fixed a bug in the update of used programs. x Actions on buttons in skin windows were disabled. Fixed. x Fixed a bug where the program list in the add new program dialog was not updated correctly. Thanks to Tim M for reporting it. x Fixed a very old bug that could lead to a bluescreen in rare circumstances. Thanks to Philippe Bertrand for dump file. x Fixed a possible deadlock (freeze). x Improved dumping speed. x Clicking on the status windows turned off auto-arrange. Pressing ESC while moving the window did not restore it to the original position. Fixed, thanks to Kikka. x Fixed an old bug that could have lead to erroneous detection or rejection of RST segments in cFosSpeed. x Fixed constant deletion/creation and trace writing if VM virtual adapter switched his MAC adress on and off constantly. x Fixed a spurious problem with opening the browser. Thanks to Stefan Waldmann for bug report. x Fixed detection of IPv6 address of router. x When using "spd cons" or the advanced connection overview, the sorting will now sort TCP and UDP connections together. x Fixed detecion of UDP protocols. - Removed old, long unused code. Removed filter rules -ppp, -mp-header, -mp-begin, -mp-end, -mp-frag, -pppp that were always false anyway (since cFosSpeed would never get PPP frames). - Internal modernization of interlocked variables. - Tested with Windows 10 Octover 2018 Update, version 1809, codename Redstone 5. - New SDK used. This includes mitigation against certain Spectre attacks. - Added / corrected several games in prioritization list. Thanks to Sc3ed. - Added some trace output to find a problem where LAN ports will open and close with a frequency of about 10 seconds. If this still happens to you, please contact us! - Switched to new compiler. - Traffic Shaping setting is now by default "not cooperative" owing to the fact that usually there are other non-cFosSpeed clients on the LAN as well (smartphones, consoles, etc.) ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/cfosspeed-v1050.exe Quote Link to comment Share on other sites More sharing options...
George Posted May 11, 2019 Author Share Posted May 11, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჰლოგით: cFosSpeed 10.51 build 2340 + By default, full screen detections requires that the full screen window is on the same monitor as the cFosSpeed status window. You can change it so full screen is detected even if the full screen window is on a different monitor than the cFosSpeed status window, by setting "per_monitor_fullscreen=0" in the file c:\unsers\<you>\appdata\local\cfos\cfosspeed\user_data.ini section [All]. Thanks to Ori for the suggestion. + Added a setting where you can turn off full screen detection if the fullscreen window is not on the same monitor. + Added IPv6 support for IPlists. The format is the same as for IPv4, just with IPv6 addresses instead. Since IPv6 address contain ':' it is assumed that Protowall format IPlists do not use ':' in the "name" portion. If that becomes a problem, use Emule format instead. cFosSpeed will only use the prefix, i.e., the upper 64 bits of an IPv6 address, since the lower 64 bits are the interface identifier, which is entirely local. + When the stored passwort to your license is lost or wrong, the screen that asks for it anew will now also accept your 30-char serial number, if that is how you got your key. x Fixed a spurious crash if installation failed. Thanks to Drool. - Added more games to the prioritization list (settings.ini) ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2340.exe Quote Link to comment Share on other sites More sharing options...
George Posted June 13, 2019 Author Share Posted June 13, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.51 build 2342 x Fixed "nsclear" and "ns -clear" commands: number of total/max TCP & UDP sessions wasn't properly cleared. x Current connections dialog would not start. Fixed. This bug was introduced in beta 2341. cFosSpeed 10.51 build 2341 - Updated prioritization list (settings.ini). ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2342.exe Quote Link to comment Share on other sites More sharing options...
George Posted June 22, 2019 Author Share Posted June 22, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.51 build 2343 + cFosSpeed can now display a toast notification under Win 10 Build 17763+. Thereby, a new version update notification leads to our webpage, where you can download it. - Support for Windows 19H1 (version 1903). ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2343.exe Quote Link to comment Share on other sites More sharing options...
George Posted July 6, 2019 Author Share Posted July 6, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.51 build 2344 x Link speeds were sometimes not properly initialized. Fixed. x Route finding trace output had double time stamps. Fixed. - Removed WMI and keyboard LED support. All variables / values are available via our built-in web server. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2344.exe Quote Link to comment Share on other sites More sharing options...
George Posted July 19, 2019 Author Share Posted July 19, 2019 ისე არა ბეტა ბოლო ფინალურის ბილდი ვიპოვე რომელიც ასუსის,ასროკის და გიგაბიტის მაზერებზე უფასოთ აქტიურდება და ვეჩნია ლიცენზია, უბრალოთ განახლება აღარ გამოვა ეგეთი ვერსიის და მე ისევ ბეტაზე დავრჩი, აი აქედან შეიძლება მასეთის გადმოწერა: https://yadi.sk/d/aQ5nYn3pZotC5Q პაროლი არქივზე ru-board, ნუ ეგ 22 მარტს გამოსული ბილდია, მაგის შემდეგ რამდენიმე ბეტა კიდე გამოვიდა Quote Link to comment Share on other sites More sharing options...
George Posted October 23, 2019 Author Share Posted October 23, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.51 build 2348 * If there exist several routes to the Internet simultaneously, cFosSpeed can now use all of them for Traffic Shaping. This is especially useful if you have a balancing setup, e.g., one LAN adapter and one mobile adapter in use at the same time. * Added "spd flush_usage_logs". Speeded "spd flush". + To save processing power, the cFosSpeed service now uses routing / address / interface change notifications to monitor route changes instead of a periodic timer. + Optimized handling of how used programs are tracked and stored. It is now faster and more consistent. + Used tech from cFos Personal Net to make the internal Webserver of the cFosSpeed service more responsive. + Added -json and -raw options to "spd ports" and "spd speed_info". + "spd pcnt" will only work if new flag global_counters is set to 1. Enable with "spd gset global_counters 1". + Added time to "X" type line of metadata dump. This line is printed when a TCP or UDP connection is killed. x Fixed a Unicode encoding bug in JSON output. x Fixed a bug where the cFosSpeed status window would not regard the position of the system taskbar with auto-arrange. Thanks to George H. - Removed the option to disable the taskbar icon. You can use the Windows taskbar configuration dialog to hide the taskbar icon if you want. - Added more common programs to the prioritization list (settings.ini). Thank you for all your program suggestions! cFosSpeed 10.51 build 2345 x Hopefully fixed window open bug. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2348.exe Quote Link to comment Share on other sites More sharing options...
George Posted November 8, 2019 Author Share Posted November 8, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.51 build 2349 * Added a new API to get current connections info, which is 20(!) times faster than the old one. + The current connections dialog now displays a CPS history of the last 15 secs. It uses our new API. - Reduced the time the window reacts in "click-through auto" from 4 to 3 seconds. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2349.exe კრაკი როგორც ესეთი არა აქვს მაგრამ მე cfosspeed.10.xx.(x64)-patch.exe ვფიქსავ 30 დღიან პერიოდს, რომ გასდის ვადა ისევ ვაყენებ და შეტყობინებებს აღარ აგდებს რომ ვადა გასდისო, მაგ მხრივ ვეჩნია, დიდი ხნის წინ დაიდო გაფიქსვის ეგ ვარიანტი და კრაკის ანალოგია ფაქტიურათ, რაც მთავარია კარგათ უბერავს და ტვინს არ ბურღავს ლიცენზია იყიდეო Quote Link to comment Share on other sites More sharing options...
George Posted November 12, 2019 Author Share Posted November 12, 2019 ახალი ბეტა ბილდი დაიდო კიდე ესეთი ერთი ფიქსით: cFosSpeed 10.51 build 2350 - Removed useless trace output. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2350.exe Quote Link to comment Share on other sites More sharing options...
George Posted November 13, 2019 Author Share Posted November 13, 2019 კიდე ახალი ბეტა ბილდი გამოვიდა მაგრამ როგორც მაგ ბოლოში მანდაც ფრიზავს და ეკიდება გამშვები და რეაქცია არა აქვს: cFosSpeed 10.51 build 2351 x Fixed freeze that was introduced in beta 2350. http://www.cfos.de/en/download/start-download.htm?file=/beta/cfosspeed-v1051-build2351.exe როგორც ჩანს ვერ დაფიქსა, დროებით ფინალური ვერსია დავაყენე მანდ კარგათ უბერავს, როგორც 2349 ბეტაზე მაგრამ მაგის ლინკი ვერსად ვეღარ ვნახე Quote Link to comment Share on other sites More sharing options...
George Posted November 16, 2019 Author Share Posted November 16, 2019 ახალი ბეტა ბილდი გამოვიდა შემდეგი ჩეინჯლოგით: cFosSpeed 10.51 build 2352 + For click-through-auto mode, you can now configure the time needed to switch off click-through (the time you need to hover the mouse pointer over the cFosSpeed window). To change that time, set the key click_through_time=<secs> in file %LOCALAPPDATA%\cfos\cfosspeed\user_data.ini, section [All]. Default is 3 secs. Thanks to leon479959891 for the suggestion. x Hopefully fixed sporadic freeze that was introduced in beta 2350. - Support for Windows 19H2, November 2019 Update. ესეც გადმოსაწერი ბილდი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2352.exe ვსიო მეტს აღარ ფრიზავს და მუშაობს პანელი უკვე Quote Link to comment Share on other sites More sharing options...
George Posted November 23, 2019 Author Share Posted November 23, 2019 ახალი ბეტა ბილდი გამოვიდა კიდე შემდეგი ჩეინჯლოგით: cFosSpeed 10.51 build 2355 x Fixed prioritization dialog. - (Re)setting the prio class will now have immediate visual effect, even if there is no data on the connection. cFosSpeed 10.51 build 2354 x Fixed bug which caused 100% load on one core. cFosSpeed 10.51 build 2353 + The advanced current connections dialogs now also uses the new, faster API. Connections are now prioritized with regard to the network adapter if multiple adapters are in use. Thanks to MSI for the suggestion. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2355.exe Quote Link to comment Share on other sites More sharing options...
George Posted November 28, 2019 Author Share Posted November 28, 2019 ახალი ბეტა ბილდი გამოვიდა ამ ერთი ფიქსით: cFosSpeed 10.51 build 2356 x Not all binary files were digitally signed. This was introduced in build 2349. Fixed. ესეც გადმოსაწერი ლინკი: http://www.cfos.de/en-us/download/start-download.htm?file=/beta/cfosspeed-v1051-build2356.exe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.