George Posted December 24, 2010 Share Posted December 24, 2010 ახალი ბეტა ვერსია გამოვიდა : This beta uses a completely new driver. It properly updates ACPI temperatures on all systems (including laptops), accesses Nuvoton W83627DHG-P, no longer reads SMART Error Log Reporting data on program start (thus reducing incompatibilities), fixes Fintek F71858 support at unusual addresses and requires administrative privileges on program start. Too many features nowadays require privilege elevation thus I chose to make it mandatory. Improved and verified the ability to fully control fan speeds using W83667HG and W83667HG-B. Added support for more hardware and added new features. Program startup is now much faster! Bug fixes and improvements as always. ესეც ლინკი: http://bin.ge/file/24430/sfbeta.zip.html Quote Link to comment Share on other sites More sharing options...
ბექა Posted December 25, 2010 Share Posted December 25, 2010 ლეპტოპისთვის არ არის სპიდ ფანი ? Quote Link to comment Share on other sites More sharing options...
George Posted December 25, 2010 Author Share Posted December 25, 2010 არა მარტო ზოგიერთ ჩიპსეტებზე მუშაობს ნორმალურათ და შეიძლება ფანის რეგულირება ყველა არ მუშაობს და გააჩნია ფანს, თუ არ ეწევა ზევით-ქვევით ამით ვერ დაუწევს აბაროტებს, ნუ შეიძლება ოდნავ დაწიოს მაგრამ ჩემთან არ იწევა არცერთ ფანზე მაგალითად ამ უტილიტით, უფრო ტემპერატურას ვუყურებ ხოლმე გაშვებული მაქვს სტარტაპში და პროცესორის ბირთვის ტემპერატურას ვნახულობ, კიდე მაზერის, ხარდის და პროცესორის ტემპერატურას აჩვენებს, ვიდეოკარტის ტემპერატურას მაინც EVGA precision ვნახულობ ხოლმე Quote Link to comment Share on other sites More sharing options...
Eip Ococh Posted December 25, 2010 Share Posted December 25, 2010 ჩავრთე და დედა ეტირა კომპს გაჭედა 1 Quote Link to comment Share on other sites More sharing options...
George Posted December 25, 2010 Author Share Posted December 25, 2010 რავი ჩემთან მშვენივრათ უბერავს არაფერი გაუჭედია, ალბათ შენი მაზერის ჩიპსეტი არ მოეწონა ნა რაღაცა სხვაც გქონდა გაშვებული და მაგან შეუშალა ხელი, ჩემთან სტაბილურია სისტემა საღამოს დავაყენე და კი უბერავს მშვენივრათ Quote Link to comment Share on other sites More sharing options...
George Posted December 31, 2010 Author Share Posted December 31, 2010 ახალი ბეტა ვერსია გამოვიდა ვისაც წინა ვერსიაზე ქონდა პრობლემები, თუმცა ჩემთან კარგათ უბერავდა, მაგრამ ეს უფრო სწრაფია აშკარათ, აი ჩეინჯლოგიც: Beta 6 improves fan control for IT8712F and adds full support for IT8721F (that was often mistakenly identified as an IT8718F). IT8721F support for fan control has been fully verified and it works great. This beta starts to add support for Fintek F71809 and Fintek F71859. Please contact me if you have any of the two. Several other fixes and improvements are there. SpeedFan.exe is now digitally signed using my company's (SOKNO S.R.L.) certificate. This time the beta comes with a full installer, needed to upgrade the device driver. ესეც ლინკი: http://bin.ge/file/25345/sfbeta.zip.html Quote Link to comment Share on other sites More sharing options...
agapo Posted January 1, 2011 Share Posted January 1, 2011 ისა თუ შეიძლება რომ უფრო გარკვევით აგვიხსნათ რისი პროგრამაა და რაში ეხმარება კომპიუტერს? Quote Link to comment Share on other sites More sharing options...
George Posted January 1, 2011 Author Share Posted January 1, 2011 ფანის კონტროლი შეიძლება ზოგიერთ კონფიგურაციებზე და ფანებზე, ბევრ რაღაცაზეა ეგ დამოკიდებული, კიდე ტემპერატურას აჩვენებს და ძაბვას, ტრეიში მაქვს გაშვებული და პროცესორის ბირთვის ტემპერატურას მიჩვენებს თუმცა შემიძლია სხვა რაღაცის ტემპერატურაც ვაჩვენებინო, მაგალითად HDD ან პროცესორის: მოკლეთ პატაა უდობნი უტილიტაა, მე მომწონს თუმცა იგივეს გაკეთება კიდე სხვა პროგრამებითაც შეიძლება Quote Link to comment Share on other sites More sharing options...
George Posted January 29, 2011 Author Share Posted January 29, 2011 ახალი ბეტა 10 გამოვიდა და მალე ალბათ ფინალურიც გაიჩითება, ესეც ჩეინჯლოგი თუ რეები დაიფიქსა წინა ბეტას შემდეგ: Beta 8 adds support for new chips (EMC2113, Jedec compliant DIMMs), for Intel Sandy Bridge temperatures, for Intel 6 Series SMBus and more. Support for Intel SMBus has been enhanced. Voltages for Intel DP67BG are now exact (native support for more Intel motherboards will be added soon). Beta 10 adds support for precise voltage readings on Intel Sandy Bridge motherboards, ITE IT8728F support and NCT6776F support. Detection of some Nuvoton chips required some code refactoring: I need your reports from motherboards with Winbond/Nuvoton hardware monitor chips. If there is no issue with this beta, it will go Final very soon. SpeedFan.exe is now digitally signed using my company's (SOKNO S.R.L.) certificate. This time the beta comes with a full installer, needed to upgrade the device driver. Please, use the SEND REPORT facility on the INFO tab to help me to evaluate the improvements I coded. Tool to read ACPI TABLES 1.11 (15 apr 2010) ესეც ლინკი: http://bin.ge/file/27860/sfbeta.zip.html წინა ვერსიები აღარ ჭირდება ამ ახალ ბეტებს, თავისი ინსტალერი მოყვება როგორც ფინალურ ვერსიას Quote Link to comment Share on other sites More sharing options...
George Posted February 19, 2011 Author Share Posted February 19, 2011 ახალი ბეტა ვერსიაც გამოვიდა, ესეც ჩეინჯლოგი: Beta 12 brings back full support for nVidia video cards, improves voltage readings on Asus P8P67, fixes support for JEDEC JC424, adds full support for Fintek F71808E, F71858 and F71809, properly reports HD temperature for some new hard disks, shows Intel Core temperatures only for real cores (and not for threads), adds support for Nuvoton W83L771, improves UI responsiveness and much more. SpeedFan.exe is now digitally signed using my company's (SOKNO S.R.L.) certificate. This time the beta comes with a full installer, needed to upgrade the device driver. Please, use the SEND REPORT facility on the INFO tab to help me to evaluate the improvements I coded. ესეც ლინკი ქართულზე: http://bin.ge/file/29995/sfbeta.zip.html Quote Link to comment Share on other sites More sharing options...
George Posted March 4, 2011 Author Share Posted March 4, 2011 კიდე ახალი ბეტა ბილდი გამოვიდა, ესეც ჩეინჯლოგი: Beta 14 mainly fixes a configuration issue with nVidia video cards that prevented the correct restoration of labels and other options. Some other fixes under the hoods, as usual. SpeedFan.exe is now digitally signed using my company's (SOKNO S.R.L.) certificate. This time the beta comes with a full installer, needed to upgrade the device driver. Please, use the SEND REPORT facility on the INFO tab to help me to evaluate the improvements I coded. ესეც ლინკი ქართულზე: http://bin.ge/file/31378/sfbeta.zip.html 1 Quote Link to comment Share on other sites More sharing options...
gio_kiborg Posted March 17, 2011 Share Posted March 17, 2011 ფინალურიც გამოვიდა 4.43 Changelog - restored full nVidia video card support - hard disk finding now uses more stringent rules that lead to a much faster program startup - fixed configuration issues with multiple nVidia video cards on the same system - greatly improved User Interface responsiveness - administrator privileges are now required and enforced to run SpeedFan - added full support for Nuvoton W83627DHG-P, including PWM control - added full support for Nuvoton NCT6776F, including PWM control - added full support for Fintek F71808E, including PWM control - added full support for Fintek F71809, including PWM control - added full support for ITE IT8728F, including PWM control - added full support for EMC2113, including PWM control - added full support for Nuvoton W83L771 - added full PWM control for ITE IT8721F - added support for several JEDEC JC 42.4 compliant sensors - fully verified ITE IT8721F fan reading and control - improved support for ACPI Thermal Zone temperatures reporting - fixed Nuvoton W83667HG PWM MODE advanced settings - fixed Nuvoton W83667HG-B PWM MODE advanced settings - fixed Nuvoton W83677HG-I PWM reading - fixed Winbond W83791D and Winbond W83792D TEMP2 and TEMP3 readings - fixed Nuvoton W83627DHG, W83627EHF and W83667HG PWM TYPE settings - fixed ITE IT8728F H/M identification - fixed ITE IT8728F advanced properties support - fixed ITE IT8720F PWM control - fixed PWM readings for fans 4 and 5 on some ITE IT8712F - added support for 3 additional temperature readings for Nuvoton W83677HG-I - added support for Vtt voltage reading on ADT7490 - added Fintek F71858 support for fans, PWMs and advanced options - improved detection of AD7417 to avoid false identifications - Intel Core temperature are now properly read for 2nd Generation Intel Core Processor Family (Sandy Bridge) - TIntelCoreSensor avoids reading temperatures from threads resulting from Hyper-Threading - fixed temperature reporting on some hard disks that do not expose the usual SMART attribute - added identification of Fintek F71869F - added preliminary identification of ITE IT8772F - added preliminary detection of Asus A8000B - fixed a bug that prevented access to the SMBus on some ATI southbridges - voltage scans are no longer automatically enabled for several ITE chips - added preliminary identification for Fintek F71859 - added identification of Fintek F71809 and Fintek F71859 - added full support for Intel 6 Series SMBus - added Intel NM10 SMBus enabler - added full support for Intel ICH10 82801JD/DO SMBus - /NONVIDIAI2C command line parameter is properly honoured again - fixed a nasty bug in Intel SMBus support routines that could lead to releasing SMBus ownership at the wrong time - improved Intel SMBus routines - added exact voltage readings for Intel DH61BE, DH61CR, DH61DL, DH61WW, DH67BL, DH67CL, DH67GD, DH67CF, DP67BA, DP67DE, DP67BG, DB65AL, DQ67EP, DQ67OW, DQ67SW, DX58OG - improved voltage readings for Asus P8P67 DeLuxe, P8P67 and P8P67-M - pre-built configuration support has been added - pressing on the left of the tabs on the main form no longer closes the program Download SpeedFan 4.43 Final Quote Link to comment Share on other sites More sharing options...
George Posted March 17, 2011 Author Share Posted March 17, 2011 განვაახლებ ეხლა Quote Link to comment Share on other sites More sharing options...
George Posted April 9, 2011 Author Share Posted April 9, 2011 SpeedFan 4.44 beta 4 გამოვიდა, ესეც ახალი ვერსიის ჩეინჯლოგი: SpeedFan 4.44 beta 4 (07 apr 2011) Because of the nature of this beta, please, do not mirror (it would be a copyright violation) this file. This beta will expire, but a FINAL release will see the light long before then. This beta uses a new driver. Added support for readings from ASUS ATK0110. Rewritten support for DELL systems, including 64 bit systems. Added a new fan control method. Beta 4 changes: - fixed hysteresis conversion to Fahrenheit an typo - hysteresis can now be set to 0 too - enabled REMOVE buttons in Fan Control UI - added full support for PWM control to F71809 SpeedFan.exe is now digitally signed using my company's (SOKNO S.R.L.) certificate. This time the beta comes with a full installer, needed to upgrade the device driver. Please, use the SEND REPORT facility on the INFO tab to help me to evaluate the improvements I coded. ესეც ლინკი: http://bin.ge/file/34912/sfbeta.zip.html Quote Link to comment Share on other sites More sharing options...
George Posted June 18, 2011 Author Share Posted June 18, 2011 SpeedFan 4.44 beta 6 გამოვიდა ამ დღეებში, ესეც ახალი ვერსიის ჩეინჯლოგი: Beta 6 changes: - fixed a bug in Advanced Fan Control (AFC) causing SpeedFan not to find temperatures - fixed AFC after system suspend - improved Asus laptops fan speed detection - improved SMART hard disk temperature attribute identification - rebuilt ARECA RAID support (against latest library) - I need reports from Areca users (especially those with SAS hdds) - AFC enable/disable setting now survives program restart. ესეც ლინკი http://bin.ge/file/40305/sfbeta.zip.html ASUS ATK0110 სენსორს ჯერ კიდევ ვერ კითხულობს ნორმალურათ Quote Link to comment Share on other sites More sharing options...
George Posted July 14, 2011 Author Share Posted July 14, 2011 SpeedFan 4.44 ფინალრუი ვერსია გამოვიდა, ესეც ჩეინჯლოგი: 4.44 - added full support for ATK0110 - added Advanced Fan Control including a graphical UI for configuration - DELL support is now working on 64 bit systems too - DELL support can change fan speeds, but if the BIOS is overriding it, there is little SpeedFan can do - added support for ST STTS3000 and ST STTS2002 DIMM temperature sensors - reported temperatures and fan speed on Sony Vaio VGN-FW21E - fan speed is reported on some ASUS laptops with ATK0100 (like the F81Se and the K52JT) - added preliminary identification of Fintek F71862 - PWM values can now be logged too - temperatures are no longer tied to every fan speed as a default - added F71809 PWM setting and reading - improved SMART hard disk temperature reading if multiple attributes seem to report it - rebuilt ARECA DLL with latest library and improved Areca RAID support - more aggressive behaviour setting PWMs (this might help on systems where something else tries to change them) ესეც გადმოსაწერი ლინკი http://www.almico.com/speedfan444.exe ეგ ასუსის ATK0110 ყველა მაზერებზე არ მუშაობს როგორც ჩანს, კი გამოჩნდა ჩემთან სენსორი მაგრამ ჯორივით 1.54ვოლტზეა ყველა პაკაზატელი გაჩერებული, ისე კი კარგათ უბერავს სხვა სენსორებზე Quote Link to comment Share on other sites More sharing options...
George Posted September 3, 2011 Author Share Posted September 3, 2011 SpeedFan 4.45 beta 2 (28 aug 2011) გამოვიდა უკვე, ესეც ჩეინჯლოგი: Because of the nature of this beta, please, do not mirror (it would be a copyright violation) this file. This beta will expire, but a FINAL release will see the light long before then. Beta 2 changes: Added full support for ATI Video Cards (including fan control) Added support for ITE IT8772F Added support for SMSC EMC2103-1 and SMSC EMC2103-2 Added support for Fintek F71889A DELL support is now available on a wider range of computers http://bin.ge/file/44766/sfbeta.zip.html works better on a wider range of motherboards Advanced Fan Control UI now allows negative temperatures, fine tuning of control points (using right mouse click) and auto-repeat on range buttons Fixed some bugs in Advanced Fan Control UI Fixes and improvements as usual SpeedFan.exe is now digitally signed using my company's (SOKNO S.R.L.) certificate. In order to run this beta, simply install SpeedFan 4.44, then replace the EXE (or put it in any temporary folder) and run it. Please, use the SEND REPORT facility on the INFO tab to help me to evaluate the improvements I coded. ესეც გადმოსდაწერი ლინკი: http://bin.ge/file/44766/sfbeta.zip.html როგორ ეშვება ზემოთ წერია ჩეინჯლოგში, ისე კი მართლა დაიფიქსა Asus ATK0110 სენსორი და სწორათ აჩვენებს ეხლა უკვე ტემპებს P5B-ზე Quote Link to comment Share on other sites More sharing options...
George Posted October 1, 2011 Author Share Posted October 1, 2011 SpeedFan 4.45 beta 4 გამოვიდა ასეთი ჩეინჯლოგით: SpeedFan 4.45 beta 4 (25 sep 2011) Because of the nature of this beta, please, do not mirror (it would be a copyright violation) this file. This beta will expire, but a FINAL release will see the light long before then. Beta 4 changes: Improved ATI video card support (including CrossFire configurations) Improved Asus ATK0110 on some motherboards Added support for AMD Hudson-2 SMBus Added support for Fintek F71869AD Completely rewritten DELL support Added support for Fintek F71862 at unusual addresses ესეც გადმოსაწერი ლინკი: http://bin.ge/file/46277/sfbeta.zip.html Quote Link to comment Share on other sites More sharing options...
George Posted November 3, 2011 Author Share Posted November 3, 2011 ფინალური SpeedFan 4.45 გამოვიდა შემდეგი ჩეინჯლოგით: 4.45 - added full support for ATI RADEON video cards (including CrossFire configurations and fan control) - completely rewritten DELL support - DELL support is now enabled on a wider range of models - added full support for ITE IT8772F - added support for Fintek F71889A - added full support for SMSC EMC2103-1 and SMSC EMC2103-2 - added support for Fintek F71869AD - added support for Fintek F71862 at unusual addresses - preliminary support for SMSC SCH5317 - fixed Nuvoton W83627DHG-P PWM MODE advanced settings - fixed ASUS ATK0110 readings on several motherboards - fixed ATK0110 support on some Asus motherboards - enabled SMBus on Intel ICH9M-E, if needed - added full AMD Hudson-2 SMBus support - TACPISonySensor support is now probed on all SONYs - fixed multiple glitches and bug related to Advanced Fan Control UI - in Advanced Fan Control dialog, control points can be fine tuned (+1,-1,+10,-10) using the right mouse button - SMART Fitness synthetic value now is more stringent with some specific issues, reporting 0% in some cases that require immediate attention ესეც გადმოსაწერი ლინკი: http://www.almico.com/speedfan445.exe ეხლა სწორათ აჩვენებს ასუსის მაზერებზე ATK0110 სენსორს Quote Link to comment Share on other sites More sharing options...
George Posted February 18, 2012 Author Share Posted February 18, 2012 SpeedFan 4.46 beta 4 (14 feb 2012) გამოვიდა შემდეგი ჩეინჯლოგით: Beta 4 changes: added voltage reading tweaks for several Intel boards added configurations for several Intel boards added MSI MS-7577 configuration added full support for Fintek F71858AD improved Areca support for SAS controllers refactored USB external drive detection added support for USB external enclosures using SunPlus, IoData and Logitech chipsets ესეც გადმოსაწერი ლინკი: http://bin.ge/file/55006/instsf446b4.exe.html Quote Link to comment Share on other sites More sharing options...
George Posted March 9, 2012 Author Share Posted March 9, 2012 SpeedFan 4.46 beta 6 (08 mar 2012) გამოვიდა შემდეგი ჩეინჯლოგით: Beta 6 changes: ATI video card fan control is reset to its original state on SpeedFan exit added ServerWorks HT1000 SMBus support added support for AMD Llano and Bobcat core temperature reading ესეც გადმოსაწერი ლინკი: http://bin.ge/file/56094/sfbeta.zip.html პირდაპირ exe ფაილს ვცლით და მორჩა Quote Link to comment Share on other sites More sharing options...
George Posted March 27, 2012 Author Share Posted March 27, 2012 SpeedFan 4.46 ფინალური ვერსია გამოვიდა შემდეგი ჩეინჯლოგით: 4.46 - greatly improved DELL support - nVidia I2C support works again with driver 275+ - now ATI Radeon support resets Manual Fan Control to the state it had when SpeedFan was started (no more unexpected video card fan set to 100% on program exit) - added support for Intel X79 (Patsburg) SMBus - added support for ServerWorks HT1000 SMBus - added SAT support for USB enclosures - added support for USB enclosures using SunPlus, IoData and Logitech chipsets - added voltage reading tweaks and configurations for several Intel motherboards - added full support for Fintek F71858AD - rewritten Areca RAID support and improved support for Areca SAS controllers - slightly refactored hard disk USB vendor guessing - added support for AMD Family 12h (LLano) temperature - added support for AMD Family 14h (Bobcat) temperature - ATK0110 tries to find the best interface when multiple ones are available in ACPI BIOS (please, report if support is broken for your motherboard model) - added preliminary support for Fujitsu-Siemens Hades ესეც გადმოსაწერი ლინკი: http://www.almico.com/speedfan446.exe Quote Link to comment Share on other sites More sharing options...
George Posted May 12, 2012 Author Share Posted May 12, 2012 SpeedFan 4.47 Beta 2 გამოვიდა შემდეგი ჩეინჯლოგით: Beta 2 changes: CSMI support (Intel Matrix Raid and Intel Rapid Storage, for example) Minor fixes ესეც გადმოსაწერი ლინკი: http://bin.ge/file/59419/sfbeta.zip.html Quote Link to comment Share on other sites More sharing options...
urekeli_l Posted May 18, 2012 Share Posted May 18, 2012 ეხლა მქონდა დეყენებული და არ ცვლის ჩემთან ფანის სიჩქარეს სხვა პროგი არ იცით რამე? და რამე განსხვავება არის ბიოსში დავაყენებ ფანს ტურბოზე თუ პროგით ავუწევ? Quote Link to comment Share on other sites More sharing options...
მიშო Posted May 18, 2012 Share Posted May 18, 2012 speedfan-ის მეტი მემგონი არაა პროგრამა და ეგეც არ მუშაობს ვგონებ. ჩემსაზე ვცადე დაწევა და არ დაეწია. ბიოსიდან თუ ეცვლება იქიდან შეუცვალე. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.